Anping County Hongda Turtle Mesh Factory is a separate legal person enterprise mainly producing tortoise shells, specializing in the production of tortoise shells, anchor nails, high temperature resistant stainless steel fibers. It was founded in 1985, covering an area of more than 3000 square meters, a plant area of 1200 square meters, and fixed assets of more than 1.8 million yuan. Large annual output and fast delivery. There are more than 200 employees, including 2 senior designers and more than 20 engineering technicians. Product introduction: Turtle shell mesh is a large clay claw tortoise shell mesh newly developed by our factory. High temperature resistant amorphous lining materials are generally reinforced with tortoise shell mesh. In special cases, 0Cr13 material is used. When using, first weld the tortoise shell mesh on the inner wall of the boiler or hot air duct, and then apply refractory materials. Anchor nails are divided into Y type U-shaped Type T L type. The specification and material are customized according to the customer's requirements. The general height is 60MM-140MM, the diameter is 6-8MM, and the plate thickness is 6MM. This significantly increases the thickness of the filler layer. Product advantages: hexagonal large clay claw tortoise shell, and the addition of stainless steel fiber material significantly enhances the anchoring ability with the lining material. Thus, the bonding performance of the lining material itself is effectively enhanced, and the phenomenon that the heat insulation layer is easy to peel and fall off can be completely controlled, so as to improve the bonding fastness of the lining material. Product material: It is used to cast amorphous lining materials. The anchoring effect of lining materials can be selected from a wide range of materials: A ordinary carbon steel 0Cr13.1Cr13.1Cr17. 0Cr18Ni9.1Cr18Ni9Ti, 0Cr25Ni20. The hole spacing is 40mm-80mm, the mesh height is 8MM-40MM, the plate thickness is 1mm - 3mm, and the mesh size is customized by the purchaser. Several main engine plants have cooperated to produce various metal fittings, and various lining metal structural parts have been supplied for many petrochemical equipment manufacturers. The products produced are widely used in large-scale petrochemical plants, In particular, it is one of the main accessories of the lining structure that is conducive to the main equipment of the catalytic unit. It can improve the abrasion resistance and strength of the lining. The abrasion resistant lining is reinforced with tortoise shell mesh, and the general parts are reinforced with carbon steel (A3F) tortoise shell mesh, such as the reactor, primary and secondary cyclone separators U-tube updater flue, high temperature parts are made of alloy (1Cr13) tortoise shell, such as updater and primary and secondary cyclone separators. The tortoise shell net is a hexagonal grid formed by punching flat steel strips and fixed on the end plate of the heat preservation nail. Factory director Wang Jianzheng: welcome all users with all staff. Welcome to inquire about the processing and customization, and the specific price is negotiable.
