Product introduction:
AMP-100 deck Waterproof coating The standard of road and bridge is to use alkali metal silicate solution as the base material, add appropriate catalyst, additives diluent , a kind of water-based seal prepared by mixing, stirring and reaction Waterproof agent 。
Amp-100 is a solvent containing complex water agent such as catalyst and carrier, which has strong permeability and can penetrate cement More than 3cm inside the concrete, and secondary reaction with alkali substances, generate water insoluble gel, fill in the small pores and gaps inside the cement concrete, and then seal its capillary channels, forming a complete, ideal and waterproof whole with a certain thickness.
Product characteristics:
1. Low surface tension, strong permeability * * *, AMP-100 bridge deck waterproof coating Special price every day, large diffusion area
2. Brushing or spraying on the surface of concrete or mortar can penetrate more than 10~30mm to make the surface of concrete and mortar dense and increase hardness and strength
3. It can effectively resist wind erosion, carbonization and pulverization of concrete or mortar, and abrasion of sand dust on concrete
4. It can resist the corrosion of acid and chlorinated substances on reinforcement and concrete
5. AMP-100 bridge deck waterproof coating is at a special price every day. It is breathable and does not crack or swell
Scope of application:
1. Amp-100 waterproof coating for road and bridge waterproof works, waterproof and impermeable for various highway subgrade, bridge foundation surface, elevated road surface, etc.
2. Waterproof and impermeable foundation terrace, airport runway, hydraulic engineering canal dam, etc.
Performance index:
Density (25 ° C): 1.08-1.1g/cm3;
PH：10-12；
Solvent: water;
Impermeability/penetration height: 30mm;
Refer to the amp-100 waterproof coating test report for details.
Construction introduction:
1. Common construction methods can be used, such as brushing, dipping, spraying, etc;
2. Amp-100 waterproof coating for road and bridge waterproof works shall be sprayed with sufficient water on the base surface before construction to make the base completely wet;
3. When the base course is wet and saturated, but the surface is dry, spray waterproof agent.
4. Spray the second coat after the surface is dry. After the second coat is dry, wet the base surface with clean water and cure it for 24-48 hours.
Dosage: 0.2kg/m2 for one coat and 0.3-0.4kg/m2 for two coats.
Packaging and storage:
Iron bucket: 20kg/bucket;
It shall be stored in a cool and dry warehouse at a temperature of 0~30 ℃;
Shelf life: 12 months for amp-100 waterproof coating of road and bridge waterproof works.
Nanchang Hongdun Waterproof Material Co., Ltd. is directly sold by AMP-100 bridge deck waterproof coating manufacturers. The shop price is for reference only. You can call for details. * * * Road and bridge waterproof coating manufacturers have affordable prices. Welcome to call for consultation.
