Haven groove embedded parts( C Grooved embedded parts) It is an ideal fastener for easy installation and adjustment. Channel The use of foam filler or strip filler can prevent the concrete from entering the channel steel. Any component can be fixed with the Haven groove embedded parts.
Use of Haven groove embedded parts
The Haven groove embedded parts are ideal fasteners for easy installation and adjustment. The use of foam filler or strip filler in the channel steel can prevent the concrete from entering the channel steel. Any component can be fixed with Haven channel steel, such as: one concrete curtain two Precast concrete slab three The Conduit Support system four Brick structure support
Haven channel steel is also suitable for all fixtures where dynamic loading occurs, such as lifting rails or mechanical fixtures. For this purpose, hot-rolled channel steel can be used specially.
The quality characteristics are as follows: high bearing capacity, high reachability 32kN or 128kN/m
one Small margin, smaller can reach 5cm
two Easy to adjust
three No noise and dust during installation
four It has obtained formal certification and can be used for static and dynamic load bearing
five Good anti-corrosion performance, made of stainless steel or hot-dip galvanized steel
These quality characteristics make Haven channel steel an indispensable product for all designers and users. use aluminium alloy or other The building enclosure wall is made of metal rolled vierendeel shaped bars as the skeleton and glass enclosed. A wall with single and double glazing. Reflective insulating glass thickness six Mm, the dead weight of the wall is about forty Kg/m two It is light and beautiful, not easy to pollute, and saves energy. The inner side of the outer glass of the curtain wall is coated with colored metal coating. From the appearance, the whole outer wall is like a mirror, reflecting the sky and the surrounding scenery. When the light changes, the image is colorful and changeable. Under the reflection of light, the indoor vision is soft without strong light.
Basic technical requirements for Haven groove embedded parts:
1. C-shaped steel and I-shaped steel (78 * 25 * 5) are hot-rolled;
2. Material: Q235;
3. The surface is hot-dip galvanized, and the thickness of zinc layer is not less than 55um
Basic technical requirements for hot forged T-bolts:
1. 45 # steel, forged, quenched and tempered
2. Tensile resistance of T-bolt and C-groove embedded parts shall not be less than 70KN
3. Thread meets GB196 and GB197 standards The appearance of trough embedded parts effectively solves the problem of stress points of large external curtain walls. The true unit construction procedure can be realized by using the slot embedded parts curtain wall project. The utility model has the advantages of balanced force, convenient installation and easy redundant adjustment. Welcome to purchase Haven type embedded parts produced by our company