Supply applicable to Puxu RA400RA1600B Vacuum pump Inlet exhaust filter
Exhaust filter explain:
(1) Oil suction filter: the filter is set at pump On the suction pipe of the oil tank, filter the residual pollutants in the oil tank and the pollutants entering through the air hole, so as to protect the pump. However, in order to avoid cavitation of the pump, full attention must be paid to the pressure loss. Generally, 100-200 mesh thick Metal mesh Or notch wire material. Therefore, it is not a filter to control the pollution concentration of the system.
(2) High pressure pipeline filter (A): set at the pump outlet The Conduit It can protect pollutants from entering the system. Therefore, the pollutant concentration of the system can be controlled. However, as it is a high-pressure main pipeline, it is subject to the pulsation and pressure impact of the pump, so the material and strength of the filter element should be carefully considered.
(3) High pressure pipeline filter (B): in order to protect the hydraulic parts that are particularly sensitive to pollution in the system, this filter, also called terminal filter, is installed. As a result, it is often better than other The filter granularity is small. Therefore, the one with large capacity should be selected. In addition, the material and strength of components shall also be fully considered as (A).
(4) Return filter: it is set on the return oil pipeline of the system, and its function is to capture the pollutants generated or invaded in the system before returning to the oil tank. Therefore, it is a more effective and important filter to control the pollution concentration of the system. Although it is a low-pressure pipeline, according to the operation condition of the transmission device, pulsation or pressure impact will also occur, so the material and strength of the components should be fully considered. Inlet pump
(5) Circulating filter: it is set on the return oil path of the oil tank circulation, and the system has a large capacity, so it is often used when strict cleanliness requirements are required. Even if the system is not working, the pollutants in the oil tank can be trapped, so the efficiency of reducing the pollution concentration is good. In addition, a cooler is installed, which has the advantages of simultaneous cooling and easy maintenance. However, special pumps and motors are needed, and the cost is high.
(6) Air filter: It is installed on the oil tank to prevent pollutants from mixing with air into the oil tank due to the change of oil volume in the oil tank. Therefore, the filtering precision should have the same performance as the filter, and the capacity should have sufficient margin to prevent the internal pressure of the oil tank from becoming negative pressure due to hole blockage, which will cause cavitation of the pump. Pay special attention when the surrounding environment is harsh.
Exhaust filter ( Oil mist separator, oil gas separation core) Is from Imported from Europe * * * Of OEM products , good quality, high cost performance, suitable for supporting rotary vane vacuum pump and after-sales market for maintenance and replacement. Available with imported brands: BECKER, BUSCH，LEYBOLD, RIETSCHLE ***Spare parts are interchangeable
Main vacuum pump accessories: oil mist separator/exhaust filter/oil-gas separator, blade/rotary vane, carbon sheet/graphite sheet, imported carbon sheet, oil filter/oil grid, air filter/style, air assembly, special oil for imported vacuum pump, cooling fan, fan (fan blade/fan cover), oil return pipe, oil seal, bearing, shaft sleeve, exhaust valve, exhaust valve sheet, sealing kit, oil sight glass, shockproof foot, check valve, Coupling pad, regulating valve, etc
Now many people are using the German brand vacuum pump filter element, but many people are not very familiar with its use method, so how can we make the German brand vacuum pump filter element play a better role?
The first is choice. The effect of the filter element mainly depends on the selection of filter element materials. The filter element made of glass fiber can not only prevent impurities in the hydraulic oil, but also the glass fiber itself is very sharp. It can open the oil tank and let it fully filter, which is why all hydraulic oil filter elements choose filter materials. When it comes to the selection of filtration precision, it depends on whether the hydraulic pressure required in the hydraulic environment meets the required requirements.
Exhaust filter We all know that the vacuum pump filter, whose name is the same as his, is mainly used to filter some harmful things in the vacuum pump, which gives us a good protection. Usually, the filter we use needs to be filtered three times. What is the process each time? Now let's take you to explore the process of vacuum pump filter.
First of all, the vacuum pump filter can block the solids in some of the things it absorbs, so that it can provide some convenience for later filtering, because it has blocked the very large solids and dust outside, so it can not come in.
Exhaust filter Secondly, this filter has a very good feature that it can be dissolved together by high-pressure impact; The particles are collected effectively, and the smaller particles are filtered out little by little. Depending on the air flow, different work pieces will classify and collect different media, which are different.
Later, smaller dust is collected. Some gases harmful to our body can be absorbed through activated carbon, and can also filter out the smelly things left inside. Some clean fresh air that will not affect our health will also be directly sent into the air through the blower under the pressure of the blower. This is the third collection contained in the vacuum pump filter.
The above is just a simple introduction. The actual filtering principle is much more complicated than this. We can also provide better conditions in the actual situation. A good vacuum pump filter will maintain better efficiency, and good things will become satisfactory and reassuring to customers.
