As a substitute for special ceramic tiles used in swimming pools, the waterproof decorative adhesive film of swimming pools has a good effect on traditional concrete mortar The swimming pool, whether newly built or renovated, can be waterproof with plastic film. How can the waterproof decorative plastic film be laid on the concrete pool?
Figure 1
The laying of waterproof decorative adhesive film for swimming pool has high requirements for surface foundation. Before installation, strictly refer to the requirements of the base course Floor Inspection shall be carried out. Unqualified floor foundation shall be rectified and paved with 2mm self leveling cement The construction can be carried out after polishing.
The newly cast and cast-in-place concrete base course shall meet the standards for installing waterproof decorative film for swimming pool, and the design of base course shall meet the design strength requirements of static and dynamic combined load of buildings. The concrete base course must be firm and completely dry, and the surface shall be smooth, dense, flat, and free from concave convex, cracks and trace defects.
chart two
If there is a damp foundation under the concrete base course, the ground must be provided with a damp proof layer to prevent moisture infiltration. Damp proofing additives and curing agent It cannot replace the damp proof course. Every 25 mm thick fresh concrete base shall have a drying period of at least 15 days. Tide test shall be carried out before installation as far as possible.
The waterproof decorative film base course of the swimming pool shall ensure that there is no curing agent, oil, grease paint , asphalt, dust and any other sundries that may hinder the adhesive bonding, without cracks, honeycombs or bulges. If the surface does not meet the requirements, the cement mortar leveling layer shall be used for repair or self leveling cement leveling.
If curing agent, hardener, sealing agent or release agent has been used on the concrete surface, the above substances shall be completely removed by grinding, sand blasting or grinding before laying the floor, because they will weaken the adhesive force of the adhesive.
chart three
FLAGPOOL Lange swimming pool waterproof decorative plastic film lining is a professional waterproof material composed of PVC and synthetic resin. It has the characteristics of light weight, strong wear resistance, beautiful design and color, and bacteria resistance. It is widely used. The specification is 1.5mm thick, 1.6m wide, and 25m long coiled material. It is one of the new swimming pool building materials and modern environmental protection products. Its soft property makes the waterproof decorative adhesive film of swimming pool also suitable for concrete pool body, and can prevent the leakage problem caused by cracking and deformation of concrete pool body due to thermal expansion and cold contraction and improper material application.
Applicable range:
Old concrete surface, tile surface after proper treatment, and new steel and concrete swimming pool.