Supply manual intensive cabinets, mobile intensive shelves and file intensive cabinets

*Specification: H 2300 * W 900 * D 560mm/set
1. Group type, column width, number of layers and columns can be selected and customized according to user needs.
2. The left and right side frames are generally double-sided mobile frames door The surface group can also be a single side mobile frame, with wall panels installed outside.
3. The transmission mechanism adopts accurate roller chains and bearings, which makes the transmission flexible, stable and light. The rocker can be automatically disengaged, and the handle is foldable to avoid traffic obstacles. Alternatively, it can be a turntable crank.
4. There are two types of track group, ground type and embedded type.
5. Side frame mounted Lock , used for locking the whole set of frames.
6. The underframe group is of sectional combination type, with high processing precision, butt interchangeability, wide range of section models, and convenient for transportation and installation. 7. For dense shelves with a width of more than 650mm, three columns are used to maintain the rigidity of the frame.
8. The frame plate, hanging plate with hook and stop bar shall be used, which shall be stable and firm after assembly.
9. The nominal load of each layer of frame plate is 40kg on one side and 90kg on both sides. If it needs to be increased, it can be specially designed, and the bearing requirements should be noted in the full text.