Provide better fireproof glass door and window partition installation plant in Jinan, Shandong

Introduction to single cesium potassium fireproof glass:

The single cesium potassium fire-proof glass produced by our company is a special glass formed by chemical and physical treatment with the introduction of German micro production technology. It has heat resistance and high anti explosion performance. Its flawless transparency has become synonymous with the float process!
Single cesium potassium fire-proof glass, through special chemical treatment, carries out ion exchange at high temperature for more than 20 hours, replaces the metal sodium on the glass surface, and forms low expansion silicate glass, with an expansion coefficient of 1.8 * 10-6/0F (3.24 * 10-6/K), so it has heat resistance. At the same time, after physical treatment, the glass surface forms high compressive stress, which greatly improves the impact strength, When the glass is broken, it will be in the state of tiny particles, reducing the harm to human body! The strength of single cesium potassium fire-proof glass is 6-12 times that of ordinary glass and 1.5-3 times that of tempered glass!
According to China's building codes, all products installed on the cutouts with fire protection requirements should be sampled by the provincial fire brigade where the enterprise is located and sent to the national fire protection material testing center of * * * (i.e., either Sichuan or Tianjin National Fire Protection Building Material Quality Supervision and Inspection Center) for testing. They must meet the requirements of the codes and can only be sold after obtaining the inspection report issued by these organizations!
The fire resistance test of single cesium potassium fire-proof glass shall be carried out according to the current national standard, and the product meets the national standard of the People's Republic of China GB15763.1-2001 Safety Glass Fireproof Glass for Building.
The advantage of single cesium potassium fire-proof glass is that it is not so much related to the temperature at which it can work, but it is able to withstand the impact of heat waves and the rapid change of enthalpy, which depends on the specific heat capacity of the glass (it can affect the rate of temperature rise), thermal conductivity (the rate and distribution of heat passing through the glass) and thermal expansion rate. At the same time, single cesium potassium fire-proof glass can withstand quenching treatment from 300 ℃ to cold water!
The thermal conductivity of single cesium potassium fire-proof glass is 1.13W/M ℃
Thermal expansion rate of single cesium potassium fireproof glass: 3 * 10-6/℃
Water resistance conforms to ISO719-HGB and ISO720-HGA standards
Acid resistance meets ISO1776 standard
Alkali resistance meets ISO695-A standard
Compared with the traditional grouting fire-proof glass, the single cesium potassium fire-proof glass is characterized by high weatherability in addition to its height and easy installation! In addition to being easy to produce bubbles during the production process, the chemical grouting fire-proof glass quickly turns milky white under ultraviolet radiation and flame, and loses the basic function of glass permeability, so it is impossible to observe the fire! The single cesium potassium fireproof glass remains transparent under the action of ultraviolet light and flame, without any change!
The single cesium potassium fire-proof glass produced by our company can be further processed into laminated safety fire-proof glass, bulletproof fire-proof glass, and other diversified products in addition to the above fire-proof performance and height!

Fire resistance time: more than 90 minutes

Fireproof glass

Characteristics of single cesium potassium fireproof glass:

1. The strength of single cesium potassium fire-proof glass is 6-12 times that of ordinary glass and 1.5-3 times that of tempered glass.

2. It has strong fire resistance, and will not burst or penetrate after burning in 1000 ℃ flame for 90-120 minutes, so as to prevent the spread of flame and smoke more effectively, leaving enough time for escape and rescue work.

3. Compared with the traditional grouted fireproof glass, in addition to its height and easy installation, it is characterized by high weather resistance.

4. Permeability: chemical grouting fireproof glass is easy to appear bubbles in the production process, but it quickly turns milky white under the action of ultraviolet radiation and flame, losing the basic function of glass permeability, so it is impossible to observe the fire situation. Single cesium potassium fireproof glass remains transparent under the action of ultraviolet ray and flame, without any change.

5. It can be processed into laminated, hollow and other composite fireproof glass.

Disadvantages:

1. Single piece fireproof glass cannot be punched, and cannot be cut and processed again.

2. It shall not be used in the places with specific requirements for heat insulation or thermal radiation protection.

name	thickness	Code	Fire resistance	Fire resistance rating
Monolithic cesium potassium fireproof glass	6mm	DFB-6CI	90min	Class C, Class I
Monolithic cesium potassium fireproof glass	8mm	DFB-8CI	120min	Class C, Class I
Monolithic cesium potassium fireproof glass	10mm	DFB-10CI	120min	Class C, Class I
Monolithic cesium potassium fireproof glass	12mm	DFB-12CI	120min	Class C, Class I
Monolithic cesium potassium fireproof glass	15mm	DFB-15CI	150min	Class C, Class I

The factory directly processes and manufactures the glass. Note that the size of tempered glass cannot be changed once it is out of the furnace. Once the production is arranged, the delivery status will be modified. No return is accepted. Please confirm the size and other detailed requirements before shooting; * ****

Price fluctuates with market price fluctuation