Silicone ink with good laser engraving performance
Overview of silicone ink: (Manager Liu * * *) It is a universal silicon RUBBER printing ink for agricultural production system, which belongs to single liquid silicone ink
Application of silicone ink: 3C and other electronic products, toys and decorative handicrafts
Product characteristics of silicone ink: High adhesion, good alcohol resistance, good radium carving performance, good silver powder arrangement, environmental protection, compliance with ROHS and halogen-free requirements, good water boiling resistance;
Supporting facilities diluent : Odorless kerosene, three toluene
Dilution ratio: 5%~10%
Drying method: 180±10℃,10MIN
Applicable substrate: agricultural production system silicon RUBBER
Silicone ink film performance (for reference only):
project | condition | result |
adhesion | Hundred bar test | 100/100 |
Recoat ability | Hundred bar test | 100/100 |
High temperature and humidity | 60 ℃, 95% relative temperature, 96H | No foaming and softening |
Salt spray resistance test | 5% Nacl solution, PH=5.5/PH=8.0， 48H | unchanged |
High and low temperature cycle | -2H at 20 ℃ and 80 ℃ for one cycle, 12 cycles in total | unchanged |
Vapor oil resistance | Advanced gasoline, 24H | No blistering, no loss of light |
Alcohol resistance | anhydrous ethanol , 500g force, wipe for 100 times | No fading |
The test data provided above are from Sanqi（ http://www.37hg.cn ）Laboratory tests; However, in actual use, the actual test results shall prevail due to the impact of the construction environment and construction methods, as well as the deviation of test instruments.
