Product introduction of card reader in centralized bathroom:
The company's products have two modes: online and offline.
The water controller is divided into split machine and integrated machine, and the split machine is composed of water controller Solenoid valve Or electric valve Flowmeter (when used for metering) Power Supply , recharge machine and ic card.
The all-in-one machine is composed of water controller, power supply, charger and IC card. （ valve And traffic are built-in)
Composition of a set of water control system:
Offline type: 1. Water controller: (also called card reader, water controller, water control equipment), one for each water * * * (shower head)
2. IC card recharging machine: (recharging each IC card, with offline balance recovery, offline loss reporting, offline recharging and other functions)
3. Ic card: each user shall prepare one card. Management cards: 1-2 (used to set the rate, amount, etc.) loss reporting cards: 1-2 (used to report the loss of the user's card, d
4. Valve door (The temperature resistance of solenoid valve is 90 degrees, and that of electric valve is 100 degrees) can be selected according to the user's use environment.
5. Power supply: one for each water controller (select the appropriate centralized power supply according to the power determined on site during centralized power supply)
Installation instructions of water controller:
1. Install the valve on the water * * * (sprinkler) and pipe to be controlled, and connect the water controller with the valve (note that the distance should not be too far)
2. System setting: use the management card to set relevant parameters on the recharge machine, such as rate, machine number, water outlet mode, etc., and then use the management card to transfer the set parameters to the water controller.
3. How to use: Insert the consumer ic card into the card slot and slide it to the sensing area to get water out. The rate and balance in the card will be displayed. Move the card to the right to stop the water supply.
