News Center

The insulator anti pollution flashover coating manufacturer Jiweicheng Brand Insulator Anti pollution Flashover Coating Factory Jiweicheng Long term anti pollution flashover coating has added nano level high insulation reinforcement materials on the basis of RTV, so that it has higher mechanical strength and adhesion, can withstand strong wind and sand climate erosion (such as areas at tuyeres, electric locomotives, etc.), and meets the requirements of equipment maintenance pedal, In the case of particularly serious pollution (for example, due to the coverage of a large amount of dust pollution, although the coating has not failed, the hydrophobicity is difficult to migrate to the polluted outer layer), necessary water washing or cleaning can be carried out, and the mechanical properties of the PRTV coating can reach the

2024/04/26 21:43:32

The price of insulator anti pollution flashover coating is one ton, and the price of insulator anti pollution flashover coating is 40000 to 90000 yuan. The hydrophobicity and migration of insulator anti pollution flashover coating are the key to improve the pollution flashover voltage level. The coating is applied on the surface of electric porcelain and forms a layer of adhesive film after curing. The adhesive film has excellent hydrophobicity under clean conditions. When the surface of the adhesive film is covered with dirt, the small molecular hydrophobic groups in the adhesive film can quickly cross the dirt layer and migrate to the surface of the dirt layer, making the surface of the dirt layer also have excellent hydrophobicity. In this way, under humid climate conditions such as fog, dew, drizzle, etc., the dirt layer

2024/04/26 21:42:23

How much is a kilogram of insulator anti pollution flashover coating? The guide price of insulator anti pollution flashover coating is 120 yuan per kilogram. The insulator anti pollution flashover coating has gone through the development process of multi-component, two-component and single component. After years of network operation, the single component RTV long-term anti pollution flashover coating and single component PRTV ultra long-term anti pollution flashover coating have excellent product quality, It has been applied in more than ten provinces and cities across the country, has nearly ten years of successful operation experience, has been welcomed and praised by the vast number of engineering technicians and workers, and has made contributions to the safe and stable operation of the power system. Anti pollution flash coating is also called room temperature vulcanized silicone rubber coating, which is divided into

2024/04/26 21:41:07

What is the product model of anti pollution flashover coating for glass insulator? The product model of anti pollution flashover coating for glass insulator is RTV and PRTV. The anti pollution flashover coating for glass insulator is divided according to the requirements of DL/T627-2018. The anti pollution flashover coating for glass insulator is also called room temperature vulcanized silicone rubber coating, which is divided into RTV anti pollution flashover coating PRTV anti pollution flashover coating is mainly used for anti pollution flashover work of power system insulator or external insulation of electrical equipment. PRTV anti pollution flashover coating is also called long-acting anti pollution flashover coating, and its various project indicators are better than RTV anti pollution flashover coating, mainly including hydrophobicity, electrical performance

2024/04/26 21:39:57

Glass insulator anti pollution flashover coating manufacturer Hebei Company Glass insulator anti pollution flashover coating manufacturer Hebei Production and Wholesale Company Glass insulator anti pollution flashover coating, as a coating specially applied to the surface of power equipment and electrical facilities, has been widely used in the power industry in recent years. Its main function is to enhance the insulation performance of electrical equipment, prevent electrical flashover accidents caused by pollution, humidity and other environmental factors, so as to improve the stability and reliability of power system operation. The research and application of antifouling flashover coatings are not only related to the safe operation of the power system, but also of great significance for promoting the technological progress of the coating industry

2024/04/26 21:38:25

How much is a ton of anti pollution flashover coating for glass insulators? The price of one ton of anti pollution flashover coating for glass insulators is quoted. The anti pollution flashover coating for glass insulators contains a large number of free organosilicon oligomers and small molecules, which are hydrophobic. When the RTV surface is polluted, the free hydrophobic substances in the RTV gradually diffuse to the polluted surface, so that the pollution layer is also hydrophobic. The surface of the dirty layer is difficult to be wetted. If the dirty layer is wetted for a long time, the surface of the dirty layer will not form water flow and water film, but will exist independently with many discontinuous small water droplets, thus greatly curbing the generation and development of the leakage current and local arc, and significantly improving

2024/04/26 21:37:36

How much is one kilogram of anti pollution flashover coating for glass insulator? The quotation of one kilogram of anti pollution flashover coating for glass insulator is quoted. With the application of new technology materials and modern polymer technology, the anti pollution flashover coating for glass insulator has the following characteristics: excellent hydrophobicity and fast, balanced and lasting hydrophobicity migration, The coating surface under two "fog, dew and fuzz in bad weather also does not form a continuous water film; it passes the steep front impact withstand voltage test and 5000h artificial accelerated aging test; the loss of hydrophobicity is still HC1-2 after% hX2 times (192h) specified in the immersion standard, which is applicable to all kinds of cruel nature

2024/04/26 21:36:47

The glass insulator is coated with anti pollution flashover coating. The glass insulator is coated with anti pollution flashover coating in liquid form. After the coating is coated on the insulator, a film will form on the surface. The film not only has excellent electrical insulation performance, but also has a special performance of extremely low surface tension, which makes the film have strong hydrophobicity and hydrophobicity migration. The hydrophobicity of the film surface can migrate to the dirty surface, making the surface sediment also have hydrophobicity. Under wet and dirty conditions, the film is difficult to get damp, which reduces the adhesion of dirt to the film, reduces the deposition rate of dirt on the film, and makes it difficult for dirt to form solid dirt on the film

2024/04/26 21:36:06

What is the spraying thickness of prtv antifouling flashover coating required by the specification? The spraying thickness of prtv antifouling flashover coating required by the specification is more than 0.3mm, and the construction thickness of general antifouling flashover coating is about 0.5mm. The thickness of prtv antifouling flashover coating is inspected as qualified according to DL/T627-2018. The coating is in liquid form, and a film will form on the surface after the coating is coated on the insulator. The film not only has excellent electrical insulation performance, but also has special performance of extremely low surface tension, which makes the film have strong hydrophobicity and hydrophobicity migration. The hydrophobicity of the film surface can migrate to the dirty surface, making the surface

2024/04/26 21:33:49

RTV antifouling flashover coating insulation? RTV antifouling flashover coating is an insulation product with good resistance and insulation performance. RTV antifouling flashover coating contains a large number of free organosilicon oligomers and small molecules, which are hydrophobic. When RTV surface area is polluted, free hydrophobic substances in RTV gradually diffuse to the polluted surface, so that the pollution layer is also hydrophobic. The surface of the dirty layer is difficult to be wetted. If the dirty layer is wetted for a long time, the surface of the dirty layer will not form water flow and water film, but will exist independently with many discontinuous small water droplets, thus greatly curbing the generation of leakage current and local arc

2024/04/26 21:31:22