News Center

The amount of cable fireproof coating applied to a bridge is 2-5kg. The amount of fireproof coating used is calculated according to the amount of cables in the cable bridge. The customer service can be consulted. The cable fireproof coating is composed of perchloroethylene resin and chlorinated rubber as the base material, and a variety of fire retardant and plasticizer are added. The characteristics of the fireproof coating are that the film will foam and expand in case of fire, The uniform and dense carbonization heat insulation and fire prevention effect is formed, which has * * * good heat insulation and fire prevention effect. Its general performance reaches the index of domestic similar products, while its fire resistance and adhesive force are superior to other similar products, with stable quality, and can be blended into

2019/04/30 23:56:36

The density of fire retardant coating applied to cables per square meter is 1.2-1.5m2/m2. The fire retardant coating for cables per square meter consists of solvent based coating composed of chlorinated rubber, paraffin and various fire retardant additives. It has good fire resistance and is applied to the surface of cables and wires. When it is exposed to fire, it expands to produce 200mm thick foam, which is carbonized into a protective layer to isolate fire sources. It is suitable for power plants Fire protection of indoor and outdoor cables of buildings with higher grade than * * * such as substations. Construction method of cable fireproof coating: 1. Before the construction of cable fireproof coating, the floating dust, oil stain and sundries on the cable surface shall be cleaned and polished

2019/04/30 23:54:57

What is the density of water-based cable fire retardant coating? The density of water-based cable fire retardant coating is 1.2/m2. Generally, the density of cable fire retardant coating is 1.2/m3 per cubic meter. The cable fire retardant coating can prevent the vertical spread of fire. Generally, the cable is laid in the pipeline shaft, which is easy to produce chimney effect in case of fire, especially for buildings on the * * * floor. If the cable does not take fire prevention measures, It is easy to spread the fire and form a large area of three-dimensional combustion. Therefore, the flame retardancy of cables is related to the spread of fire. At present, the flame-retardant cable used in the market cannot avoid cable ignition, but only according to the current flame-retardant performance

2019/04/30 23:53:19

The cable bridge oil fire retardant coating is brushed for several times. The cable bridge oil fire retardant coating is brushed for three times - five times. The cable fire retardant coating is a new type of fire retardant coating developed by our company according to the GB28374-2012 standard. The product is composed of Shupropyl emulsion water-based materials added with various fire retardant, plasticizer and other components. It is currently the more advanced water-based fire retardant coating for wires and cables in China. When the coating is exposed to fire, it can form a uniform and dense foam insulation layer, which can effectively block the spread and spread of flame and protect wires and cables. Its main advantages are: * * *, * * *, * * * tasteless

2019/04/30 23:51:46

How much is the price per square meter of oil based fire retardant coating applied to cables? The price per square meter of oil based fire retardant coating applied to cables is generally 5-15 yuan. The characteristics of this fire retardant coating are that it will foam and expand in case of fire, forming a uniform and dense carbonized heat insulation and fire prevention effect, with * * * good heat insulation and fire prevention effect. Its general performance reaches the indicators of similar products in China, The fire-resistant and adhesive properties are better than other similar products, with stable quality, and can be mixed into a variety of colors, which has a more * * * decorative effect. It is suitable for power plants, substations and indoor and outdoor cables of buildings and other flammable materials for flame retardant protection, especially for cable trenches

2019/04/30 23:49:42

The price of fire retardant coating for oil based power plant cables is 40 barrels per ton. The cable fire retardant coating is composed of perchloroethylene resin and chlorinated rubber as the base material, and a variety of fire retardant and plasticizer are added. The feature of the fire retardant coating is that the film will foam and expand when exposed to fire, forming a uniform and dense carbonized heat insulation and fire prevention effect, which has a good heat insulation and fire prevention effect, Its general performance reaches the index of domestic similar products, while its fire resistance and adhesive force are better than those of other similar products. Its quality is stable, and it can be mixed into a variety of colors, with a better decoration effect. Applicable to power plants, substations and buildings

2019/04/30 23:48:20

The power plant water-based fire retardant coating cable has been brushed for several times. The power plant water-based fire retardant coating cable has been brushed for three to five times. Generally, the coating thickness of water-based fire retardant coating for cable is 1mm, and the wire and cable can be brushed and sprayed. Apply once every 8h to a thickness of 1-1.5mm (equivalent to 2-3kg per square meter). For outdoor or * * * temperature environment, matching varnish (about 70g per square meter) shall be painted again; For corrosive or * * * temperature environment, it needs to be coated with matching varnish (about 50g per square meter). Both brushing and spraying can be applied, once every 8h until 500, 700g/m

2019/04/30 23:43:51

The price of fire retardant coating for power plant cables is quoted in a barrel. The fire retardant coating for power plant cables has good fire and moisture resistance, acid and alkali resistance, oil resistance, weather resistance, etc. The excellent physical and chemical properties are suitable for the fire protection of wires and cables in corrosive chemical enterprises, * * * hot, * * * temperature and harsh environments. The surface coating of wires, cables and alkenyl materials involved in buildings, underground works, ships, etc. can not only achieve the purpose of effective fire resistance and flame retardancy, but also play a good decorative effect. The cable fireproof coating is used to protect * * * lines. The use of fireproof coating on the cable is mainly to ensure that the cable is flame resistant

2019/04/30 23:41:59

What are the materials of the cable fire retardant coating? The cable fire retardant coating is made of perchloroethylene resin and chlorinated rubber as the base material, and a variety of fire retardants and plasticizers are added. The characteristics of the fire retardant coating are that the film will foam and expand when exposed to fire, forming a uniform and dense carbonized heat insulation and fire prevention effect, which has a good heat insulation and fire prevention effect, Its general performance reaches the index of domestic similar products, while its fire resistance and adhesive force are better than those of other similar products. Its quality is stable, and it can be mixed into a variety of colors, with a better decoration effect. Product technical index 1. Fireproof performance: wire flame resistance test report carbonization degree 2

2019/04/30 23:40:27

Fire prevention principle of cable fire retardant coating Five performance cable fire retardant coating brushing cable fire retardant coating is more energy saving and construction is more convenient than taking other protective measures. The fireproof coating has small thickness and good heat dissipation. According to the test, it has little impact on the current carrying capacity of the cable and can be ignored. However, when the power cable is laid in the fireproof tray or fireproof bridge, the current carrying capacity of the power cable will decrease by 11%~13%. Therefore, in the project, it is more economical to brush the fireproof coating than to lay it in the trough box and fireproof cable tray with lower energy consumption and lower project cost. Fire prevention principle The fire prevention principle of fire retardant coating can be roughly summarized

2019/04/30 23:38:56