News Center

Fire retardant 2-hour gypsum based fire retardant coating manufacturer Telephony fire retardant 2-hour gypsum based fire retardant coating is composed of lightweight granular porous thermal insulation materials, gypsum base, adhesives, performance enhancing materials and a variety of additives: the coating can be used as a fire retardant coating for steel frames and load-bearing steel structures in various indoor buildings, and can play an excellent role in heat insulation and fire prevention for steel structures. Application method Gypsum based fireproof coating for steel structure consists of tackifying primer and main section, and can be applied with common plastering tools and spraying tools. Steel members (such as steel beams and columns) provided for construction shall be derusted and painted with red lead antirust paint according to GBJ20583 and CECS24:90

2024/05/29 21:14:00

The 3-hour non expansive gypsum based fire retardant coating manufacturer sells the 3-hour non expansive gypsum based fire retardant coating manufacturer gypsum based steel structure fire retardant coating is used to spray the surface of steel structure. In case of a fire, it forms a thermal insulation protective layer relying on the incombustibility and low thermal conductivity of the coating itself. When the fire retardant coating burns under fire, the coating will not change in volume. The fire retardant coating itself is incombustible and only acts as a barrier to steel members and prevent thermal radiation, avoiding direct burning of steel members by flame and high temperature. When the application method is spraying, the preparation ratio of the coating is water: thick coating: interface agent=1.3:1:0.05 or so

2024/05/29 21:13:16

Light low-density gypsum based fire retardant coating manufacturers wholesale light low-density gypsum based fire retardant coating, which has small dry density, no cracking, no hollowing, controllable curing speed, and beautiful coating, and is suitable for indoor load-bearing steel structure building fire protection works, such as factory buildings, warehouses, stadiums, stations, terminals, petrochemical Fire protection works for indoor steel structure buildings such as large buildings. The fire endurance is more than 4 hours. It has sound absorption and noise reduction functions, and can be widely used for fire protection of indoor steel structures. Fire retardant coating characteristics 1, environmental protection coating, does not react with any anti-corrosion primer, does not corrode steel, can be applied in large areas, in case of

2024/05/29 21:12:29

The primary forming gypsum based fire retardant coating supplier primary forming gypsum based fire retardant coating is made of light fire-resistant, thermal insulation materials and modified inorganic high temperature adhesive. It is applied to the surface of indoor and outdoor steel structures to form a fire-resistant and thermal insulation protective layer. In case of fire, it can prevent the rigidity strength of the bearing column from dropping due to the high temperature of the fire, play a role in fire prevention and heat insulation, and has high fire resistance, The advantage of long fire resistance time. Due to low density, small volume consumption; It has strong cohesive force and good construction workability; Excellent acid and alkali resistance, usually protect the steel structure from the erosion and weathering of environmental factors, not easy to pulverize and other advantages Construction essentials: 1. Fire retardant coating can be

2024/05/29 21:11:21

The price of gypsum based fireproof coating powder coating is the quotation of gypsum based fireproof coating powder coating. The gypsum based fireproof coating powder coating is made of light fire-resistant, thermal insulation materials and modified inorganic high-temperature adhesive, which is applied to the surface of indoor and outdoor steel structures to form a fire-resistant and heat insulation protective layer. In case of fire, the high temperature of the fire will not reduce the rigidity of the bearing column, It plays the role of fire prevention and heat insulation, and has the advantages of high fire resistance performance and long fire resistance time. Due to low density, small volume consumption; It has strong cohesive force and good construction workability; Excellent acid and alkali resistance, usually protect the steel structure from environmental factors. Precautions: 1

2024/05/29 21:10:34

Gypsum based fire retardant coating for steel structure of building storeroom is good for construction spraying Gypsum based fire retardant coating for steel structure of building storeroom will not expand in case of fire after being sprayed on the surface of steel members, and will form a fire-resistant and thermal insulation protective layer relying on the incombustibility and low thermal conductivity of the coating itself, which will delay the direct invasion of fire on load-bearing members, thus effectively improving the fire resistance of steel structures. The product has the advantages of high temperature resistance, non combustible in case of fire, no smoke emission, acid and alkali resistance, long shelf life at room temperature, and can be cured at room temperature. Product characteristics: 1. The coating has low thermal conductivity, fire resistance and weather resistance. 2. The coating is light in weight, large in unit coating area and easy to construct. 3. Very strong adhesion

2024/05/29 21:09:51

Application method of gypsum based fire retardant coating for steel structure of buildings Gypsum based fire retardant coating for steel structure of buildings is used for fire protection of steel structure surface of buildings. Gypsum based fire retardant coating for steel structure adopts fiber fire temperature rise test conditions in type test. The fire resistance and heat insulation properties of the fireproof coating are required to be very high. The coating is suitable for fire protection works of load-bearing steel structure buildings, such as chemical equipment, metallurgy, power plant, workshop, warehouse and other steel structure buildings. Construction method The bottom material construction is sticky. The bottom material is divided into powder material and liquid material, which are mixed in a ratio of 1:0.9. The mixed bottom material must be within 30 minutes

2024/05/29 21:08:52

How much is a ton of white gypsum based thick fireproof coating? The price of white gypsum based thick fireproof coating is one ton. The white gypsum based thick fireproof coating is used to spray the surface of steel structures. In case of fire, it forms a thermal insulation protective layer depending on the incombustibility and low thermal conductivity of the coating itself. When the fire retardant coating burns under fire, the coating will not change in volume. The fire retardant coating itself is incombustible and only acts as a barrier to steel members and prevent thermal radiation, avoiding direct burning of steel members by flame and high temperature. Gypsum based fireproof coating has low thermal conductivity, good weather resistance, and strong pulverizing ability. When the coating is exposed to fire, it forms a high-density glaze layer, which is both heat insulation and further resistance

2024/05/29 21:08:18

Gypsum based steel structure fireproof coating product model GT-NSF-Fp3.00 Gypsum based steel structure fireproof coating model GT-NSF-Fp3.00 is made of light fire-resistant, thermal insulation materials and modified inorganic high-temperature adhesive, which is applied to indoor and outdoor steel structure surfaces to form a fire-resistant and thermal insulation protective layer. In case of fire, the high temperature of the fire will not reduce the rigid strength of the bearing column, playing the role of fire protection and heat insulation, It has the advantages of high fire resistance and long fire resistance time. Due to low density, small volume consumption; It has strong cohesive force and good construction workability; Excellent acid and alkali resistance, usually protect the steel structure from environmental factors

2024/05/29 21:07:41

Specification and weight of gypsum based fire retardant coating Specification and weight of gypsum based fire retardant coating Specification and model of gypsum based steel structure fire retardant coating GT-NSF-Fp2.50 are made of light fire-resistant, thermal insulation materials and modified inorganic high-temperature adhesive, which are applied to the surface of indoor and outdoor steel structures to form a fire-resistant and thermal insulation protective layer. In case of fire, the high temperature of the fire will not reduce the rigid strength of the bearing column, It plays the role of fire prevention and heat insulation, and has the advantages of high fire resistance performance and long fire resistance time. Due to low density, small volume consumption; It has strong cohesive force and good construction workability; Excellent acid and alkali resistance, usually protect the steel structure

2024/05/29 21:06:44