United States CO-MA-SEAL ® Inorganic permeable mineral omnipotence coating AIO， American CTI Kermis. Interior and exterior wall inorganic coating. Completely VOC free, nonflammable. Resistance to fading and chalking for 50 years. Acid and alkali resistance.
1、 Product Introduction
Inorganic permeable mineral all-purpose protective coating United States CO-MA-SEAL ® Permanent condensate AIO It is an inorganic coating that can penetrate into the concrete surface. It has various colors and hues, so that the concrete surface has a high-quality unified appearance, and it can protect the concrete structure while compensating for the concrete color and light and shade, providing long-term decoration effect and long-term protection for the concrete.
AIO Basically similar to other osmotic crystallization products, it is made of silicate and polycarbonate silicon dioxide , catalyst, various functions auxiliary And natural inorganic pigments. A The active substance of IO will penetrate into the concrete surface and chemically anchor it to generate a kind of micro mineral crystal, which is completely integrated with the concrete surface, not just the surface coating. The crystal structure of this inorganic mineral is very stable, and it can resist the corrosion of acid and alkali, and has high air permeability and water impermeability. It can let the concrete base breathe freely, so as to ensure that the penetration layer will not peel off, so that the characteristics of the product can be maintained for a long time. Well documented in Japan in Asia AIO Can maintain more than twenty-five Satisfactory results of.
Inorganic permeable mineral all-purpose protective coating AIO Unique petrification
Inorganic permeable mineral all-purpose protective coating applied to concrete base 28-35 After days, the liquid silicate penetrates into the base surface 0.5-2mm It is deep, and reacts with the concrete substrate to form three kinds of alkali resistant and acid proof silica, so that the coating and the wall body are firmly integrated, and the coating and wall It belongs to mineral matrix and has similar thermal coefficient. It can avoid coating cracking and peeling, and is suitable for any climatic environment
Petrochemical reaction process
Super liquid silicate active silicon dioxide+free alkali carbon dioxide = Three kinds of petrified silica.
2、 Performance characteristics
Waterproof and breathable: inorganic mineral all-purpose protective coating AIO Infiltrate into the wall, produce osmotic crystallization reaction, generate silicon crystals, fill the capillary channels and microcracks of the substrate, produce good waterproof performance, and the waterproof performance meets AS TM All standards. At the same time, because the microcrystal formed by the silicification reaction between the coating and the wall has good air permeability, the water in the wall body can be fully evaporated to keep the wall body dry;
Sterile and moss growth: inorganic mineral all-purpose protective coating AIO It is alkaline and does not contain any nutrients in the agricultural production system, so it can ease the growth of fungi and mosses. In addition, inorganic minerals can protect the coating AIO The balanced colony assistant in can kill fungi and mosses;
Fire retardant: inorganic mineral all-purpose protective coating AIO It is composed of inorganic minerals, does not contain any combustion substance, does not ignite and has good fire retardancy. Therefore, for fire events, there is no danger of spreading fire and no toxic gas will be released;
Color fastness: inorganic mineral all-purpose protective coating AIO The pigments are all natural metal oxides, which have the characteristics of inorganic substances, can effectively prevent ultraviolet radiation, and the color of the paint is not fading. As shown in the photo, the resistance to paint color is equivalent to one year's natural climate UV Ability. The results show that the inorganic mineral all-round protective coating AIO The color of the emulsion paint has not changed, and the emulsion paint is easy to absorb ultraviolet energy due to the use of agricultural production system pigments and fission, resulting in serious fading of the paint;
Acid corrosion resistance: the chemical property of silica formed by petrochemical reaction is relatively stable, and it is not attacked by acid substances, and can prevent the corrosion of sulfide and acid rain in the atmosphere. As shown in the photo, inorganic mineral all-purpose protective coating AIO Immersion in weak acid solution will not be affected, but the coating of agricultural production system will be completely dissolved in acid solution after a short time;
Dustproof and self-cleaning: inorganic mineral all-purpose protective coating AIO It does not contain plastic resin and other agricultural production system components, and will not produce electrostatic adsorption dust. The dust attached to the coating surface is easy to be washed clean by rain;
Harmless and environmentally friendly: inorganic mineral all-round protective coating AIO It does not contain any harmful agricultural production system solvent, and the coating has no odor, no harm, no allergy and other environmental protection characteristics during production and construction. At the same time, inorganic mineral all-purpose protective coating AIO The renovation of is relatively simple, which can be directly painted on the coating to avoid a lot of waste of human and material resources;
two hundred and seventy Three standard colors: inorganic mineral all-purpose protective coating AIO yes two hundred and seventy Three standard colors, and more special colors can be provided according to application requirements. At present, our database has been created more than fourteen thousand Different color files;
Applicable to any mineral substrate: inorganic mineral all-purpose protective coating AIO It is compatible with all material substrates, both chemically and physically. As shown in the photo, inorganic mineral all-purpose protective coating AIO It is alkaline with mineral base, while the artificial resin (used for coating of agricultural production system) in agricultural production system is acidic. Therefore, the coating of the agricultural production system must rely on the strict anti alkali primer, but after a period of time, once the primer is damaged by the alkalinity of the wall, it will cause pulverization, then blistering, falling off, etc.
3、 Quality comparison
Inorganic mineral all-purpose protective coating AIO It has better quality than other coatings AIO Compared with the emulsion paint which belongs to the same water soluble coating from product composition to product performance, it can be seen that, AIO Will be more clear
4、 Applicable base level
Solid and flat mineral base surfaces such as cement, gypsum, mixed mortar and concrete;
Old decoration walls such as firmly bonded old ceramic tile surface, old stone surface and water brush stone (renovation);
The old painted wall must be firmly bonded. If there is blister and falling off, it must be removed and repaired before painting;
If putty is used to level the wall, it is better to use putty specially for exterior wall. If it needs to be self prepared, it must be firm and insoluble in water.
5、 Product advantages
one , Economy
No expensive upfront costs: no putty and primer are required, and can be directly used on any concrete surface;
High efficiency and labor saving: spray painting is more efficient than brush painting, and it only needs to be sprayed once;
Long service life is the traditional coating 2-3 Times, repair is also simple and easy.
two Environmental protection
It has passed the testing certification of the United States Food and Drug Administration. It does not contain formaldehyde, benzene and other volatile agricultural production system substances, lead, mercury and other harmful metals, and has no reactive smell. It can be moved in after decoration, which is truly green and environmentally friendly;
From the use of raw materials to the generation of crystalline substances are inorganic substances, so the whole process of manufacturing, painting and use will not bring any harm to users and the environment.
three , sun protection, color fastness
Inorganic substances with strong natural color prevent direct sunlight and added functional additives AIO It is always sunscreen and prevent direct light, so fading and yellowing will not occur.
four Freeze thaw resistance, no peeling
AIO It penetrates into the concrete and is completely integrated with the concrete, without the phenomenon of two layers of traditional paint, and can keep the concrete breathing freely, so it will not peel off or peel off.
five , antifouling, oil proof, self-cleaning
The coating of traditional agricultural production system will automatically absorb dust due to the generation of static electricity AIO It is inorganic, so it will not automatically absorb dust, and has self-cleaning function. The air permeability and water impermeability make the appearance always clean, free of water marks and stains;
AIO It is not only antifouling but also oil resistant. Its scrub resistance is several times higher than that of high-quality traditional agricultural production system coatings. It can be used in kitchens to avoid the penetration pollution of lampblack on walls, and can be used outdoors to resist the pollution caused by outdoor automobile exhaust.
six . No concerns about infiltration
AIO It has super waterproof performance. When applied to the bathroom wall, it will never change color, mildew or peel off. When applied to the external wall, it will completely eliminate leakage.
6、 Construction method
one . Base surface treatment: all construction surfaces to be treated must be well structured, clean, free of dust, dirt, oil stain, release agent, weathering layer and other pollutants that affect the bonding ability. The new concrete or masonry surface shall be air dried before use. The cracks and holes on the surface shall be repaired first;
two . If you need artistic texture, you can first process the artistic effect on the base surface;
three Construction preparation: use electric mixer to mix before use two Minutes, or fully and evenly mixed manually five minute;
four Operation method: spraying or brushing can be used, and only one construction is required;
five The theoretical coverage is 5-6 ㎡ / Kg, and the actual coverage rate will vary depending on the construction method, construction environment and roughness of the foundation surface;
six Precautions: surface drying time 1-2 The meter shall be protected from rain before drying; Maintain after construction 1-3 Dry for maintenance every day.
7、 Packaging and storage
***Imported American gallon plastic barrel packaging, specification: one kg . / bucket five kg . / bucket twenty kg . / Barrel;
The product should be sealed and stored in a cool and dry place to avoid direct sunlight 。
