The waterproof layer of the toilet is leaking, so it is not necessary to plane tiles. It's easy to handle with this product.
one Waterproof agent Mainly, after cleaning the toilet, the floor and wall of the toilet shall be painted integrally, without omission, and shall be painted evenly. After drying, fill the gaps of the tiles with Yijia caulking paste and smooth them. If not, hang them with a scraper and clean them up. Then use plastic steel mud to make waterproof edge at the junction of wall and ground. Later, the waterproof agent was brushed once again, which completed another waterproof work on the surface of the toilet. Principle of waterproof agent: It is a harmless, odorless, colorless, non combustible and transparent liquid. The penetration force is strong. Once painted or sprayed on the surface of buildings and materials, it will quickly penetrate into the interior for 2-15mm, generating dehydration and cross-linking reaction, forming a network of high molecular polymers. The product blocks the capillaries generated during water evaporation The Conduit And micropores; Catalysed unhydrated cement The hydrated particles and partially hydrated particles are hydrated again to form insoluble crystals, which are firmly integrated with the cement products. Thus, the compactness and surface compressive strength of cement products are increased, resulting in waterproof, impermeability and strong hydrophobicity. At the same time, it also has air permeability, which makes the product not bulge, not expand, and not weathered. It has the effect of long-term stable waterproof protection. It is a harmless, tasteless, colorless, non burning, and transparent liquid. The penetration force is strong. Once painted or sprayed on the surface of buildings and materials, it will quickly penetrate into the interior for 2-15mm, generating dehydration and cross-linking reaction, forming a network of high molecular polymers. The product blocks the capillary pipes and micropores generated during water evaporation; It catalyzes the hydration of cement particles that have not yet been hydrated, and the rehydration of particles that have not been fully hydrated, forming insoluble crystals that are firmly integrated with cement products. Thus, the compactness and surface compressive strength of cement products are increased, resulting in waterproof, impermeability and strong hydrophobicity. At the same time, it also has air permeability, so that the products will not bulge, expand, and weather, achieving a long-term stable waterproof protection effect
Joint sealant:
200 million joint sealants are flexible waterproof materials with higher waterproof performance, high extension rate, strong adhesion and elasticity than ordinary joint sealants. They are not used in water distribution and mixing, but are strong and durable.
300 million plastic steel mud:
This product replaces glass cement As the terminator of glass glue, it is easy to use and can be completed by hand without any tools. It will not blacken, mildew, discolor, peel, fall off, and is durable. It is a better product for waterproof edge. It is a good waterproof material for repairing places with frequent water flow. It can also be molded and used for a wide range of purposes. It can be used around the toilet, toilet, hand basin and bath bathtub , bathroom, table, foundation line, etc. Good adhesion and strong waterproof performance. Specific maintenance methods for leakage of ceramic tile surface in toilet:
one . Clean the dust, oil stain and water on the surface and keep the surface dry ;
two If the tile joint is filled with sealant, a small groove needs to be made with a knife
three Spray Yijia permeable waterproof agent on all cement parts such as tile surface, tile joint, wall joint and pipe root, and ensure uniform spraying;
four , water proofing agent to be used nine After drying (about two Hours later), fill all tile joints, pipe roots and damaged and defective parts with Yijia caulking paste, and brush the weak links around the pipe roots with caulking paste for reinforcement;
five The connection between the ground and the wall is made of 100 million plastic steel mud as a waterproof edge.
six After waterproof construction, twenty-four The construction part shall not be drenched with water within hours.