Handan polymer anti-corrosion mortar supply Polymer anti-corrosion mortar
Contact: Cao Shixiong Tel: * * * QQ527356643 Manufacturer Direct pin
The product features good adaptability to the old concrete base, strong cohesive force, compactness, and good waterproof and anti-seepage properties. It can protect reinforcement, repair and protect corroded reinforcement, and has good durability.
Scope of application
1. It is used for external plastering repair of reinforced concrete or cracked building surfaces, panels, load-bearing columns, beams, etc. in industrial and civil facilities, and external plastering decoration of humid industrial and civil buildings.
2. It is used to repair defects such as concrete honeycombs and holes, thin layer repair of damaged concrete ground, and overall repair protective surface on the surface of concrete, masonry structure or steel structure.
3. It is used for the repair of industrial and civil buildings that have been damaged and cannot meet the design requirements. It is especially suitable for repairing floor, panel and outdoor sheet structure.
4. For underground with corrosion resistance requirements The Conduit Power plant water drying Pagoda Maintenance works of chimneys, chemical plant structures and various plant buildings with corrosive gases.
5. This product is the polymer mortar used in the "reinforcement method of wire rope polymer mortar".
6. This product is a polymer mortar used for "road and bridge repair, leveling and reinforcement".
Technical performance
|
term order
|
nature can finger mark
|
|
Compressive strength [Mpa]
|
≥30
|
|
Bending strength [Mpa]
|
≥4.5
|
|
And cement Mortar bonding strength [Mpa]
|
≥1.2
|
|
Impermeability grade [Mpa]
|
≥1.5
|
|
Water absorption [%]
|
≤5.5
|
|
Initial setting time [min]
|
＞45
|
|
Final setting time [h]
|
＜12
|
Acid and alkali resistance
|
Corrosive medium name
|
solution concentration
|
Corrosion
|
|
sulphuric acid
|
PH=2
|
No peeling and leakage after soaking for one year
|
|
hydrochloric acid
|
2%
|
No peeling and leakage after soaking for one year
|
|
sodium hydroxide
|
10%
|
No peeling and leakage after soaking for one year
|
|
Sodium oxide
|
Saturated solution
|
No peeling and leakage after soaking for one year
|
usage method
Handan polymer anticorrosive mortar supply Base treatment:
1. The surface of the base course shall be clean, dust-free, oil-free and free of chemical corrosion medium residues. The surface of porous materials shall be soaked with water in advance, and the surface of steel base course shall be cleaned of floating rust.
2. Leakage shall be treated with plugging agent first. Zui shall keep the base surface wet until there is no open water, so as to achieve better construction effect.
Material preparation:
1. First pour the glue into the bucket, and then slowly add the powder while stirring according to the ratio of glue: powder=1:4, stirring until the glue is uniform and free of caking.
2. Mechanical mixing or manual mixing can be used, and the prepared mortar shall be used up within 2-3h.
Construction and maintenance:
1. When polymer anti-corrosion mortar is used as the overall surface course, the thickness shall not be less than 3mm. When the one-time construction area is large, construction joints shall be reserved or staggered construction shall be carried out. The area of each piece should not exceed 10-15m2, depending on the site environment. The interval time for patching or staggered construction shall not be less than 24h.
2. When making the overall surface course on the facade of concrete or masonry structure and the surface of steel structure, it shall be carried out in two times, and the interval between each time shall not be less than 24h. When the second plastering of zui is carried out, it shall be trowelled at one time instead of repeated plastering.
3. The ambient temperature for the construction of this product is 10-30 ℃, which should not be lower than 5 ℃. The raw materials should not be polluted by moisture, rain, sunshine and sundries.
4. This product should not be used in rainy days or freezing days. If the construction must be carried out in winter, necessary anti freezing measures shall be taken. This product shall be used immediately after mixing. It is not allowed to mix too much materials at one time, and the materials should be used up within 2-3 hours each time.
Packaging, storage and transportation
The packaging specification of this product is 20kg ± 0.5kg/barrel for glue solution and 40kg ± 1kg/bag for powder material. It should be stored in a dry and ventilated place above 0 ℃ to avoid exposure to the sun, rain forest, moisture and freeze. The shelf life of glue solution without opening is 6 months, and that of powder material without opening is 6 months.
Handan polymer anticorrosive mortar supply Solemnly declare
The use of this product is beyond the control of the manufacturer, and the company will not bear any responsibility arising from improper use. Please refer to this product manual when using, and consult the local dealer or our technical service department for relevant questions. Reinforcing materials, waterproofing, plugging, tiling, construction, anchoring, planting reinforcement, sticking steel, mortar, design, supervision, structural reinforcement, crack treatment, pavement repair, hospitals, buildings, office buildings, construction projects, terminal buildings, hotels, hotels, power plants, chemical plants, foundation grouting, new steel materials, special building materials, track foundations, structural reinforcement, acid and alkali pools, villas Tile pasting, post disaster reconstruction, epoxy resin, pier, refinery, maintenance, infrastructure, subway, urban railway, compressor, equipment installation, chlor alkali chemical plant, stamping machine, structural column corner, bank, Olympic Games, terrace, steel factory, natatorium, gymnasium, water cube, cinema, shipyard, * *, bird's nest, municipal pipeline, sewage well, tunnel, carbon fiber Seismic Longqi Square, Hohhot Development Zone Phase II, Jiangsu Solar Power Plant, Shuangyashan Power Plant, Jiuxianqiao Shopping Mall, acid resistant brick pasting, concrete structure repair, wall and floor leveling, building roof repair, impermeability and wear resistance, plant and workshop ground repair, wear resistance and pressure resistance, steel plant, power plant, highway, bridge, pier, tunnel, * * *, aircraft runway, * * machine room repair and reinforcement, roof Walls, workshop floors, oil refineries, sewage wells, municipal pipelines, natatoriums, hospitals, chlor alkali chemical plants, earthquake resistance, high temperature resistance, reinforcement, repair and pasting Hohhot mortar
