Qinzhou G13-100SQF Glass Steel septic tank Technical principle:
FRP septic tank Compared with the traditional weight mixing septic tank, the cylindrical integral septic tank made of polymer materials and high degree fiberglass has the advantages of good tightness, no leakage, easy transportation, high compressive strength, acid and alkali resistance, long service life, fast installation, etc. The upper part of the tank body is equipped with water inlet and outlet and cleaning holes. The tank is divided into a primary anaerobic sedimentation tank, a secondary anaerobic biochemical sedimentation tank and a clarifier. The deep sedimentation tank is filled with biological anaerobic treatment filler And hanging film packing.
Domestic sewage drainage Water pipe The channel enters into the anaerobic sedimentation tank, and the wind sound is used for anaerobic sedimentation. The process form is an advanced mixed film hanging system proposed by the scientific research institute on the basis of a lot of research, which has been cultivated for a certain period of time. It enables a large number of microorganisms to attach and grow on the surface of the carrier material, and become adapted to the microorganisms growing on the surface of the carrier material after enrichment, domestication and variation, so as to achieve effective treatment of wastewater under anaerobic or anoxic conditions. The COD in the wastewater will be converted into harmless inorganic substances in the sedimentation tank and clarification tank, meeting the secondary discharge standard.
Performance comparison between traditional septic tank and FRP septic tank:
FRP septic tank:
The dead weight is 1.15t, the influent COD is 750mg/L, the effluent is 250mg/L, the influent BOD is 400mg/L, the effluent 80mg/L has less sludge, and the cleaning interval is long. Good acid and alkali resistance, service life more than 50 years, construction period only needs 1-2 days, covering an area of 15 square meters
Traditional brick septic tank:
The brick pool has a dead weight of 98t, the concrete pool has a dead weight of 63t, the inflow COD is 750mg/L, the outflow water is 500mg/L, the inflow BOD is 400mg/L, the outflow water is 300mg/L, the amount of sludge is small, the cleaning interval is short, the brick pool has poor corrosion resistance, the concrete pool is good, the construction period is up to 25-30 days, and the floor area of the brick pool is 27 square meters, and the concrete pool is 22 square meters
Series and parallel installation technology of FRP septic tanks:
The larger volume of fiberglass septic tank is 100 cubic meters. When the user's demand exceeds 100 cubic meters, we can adopt parallel or series installation to meet the customer's demand for large volume.
Qinzhou G13-100SQF glass reinforced feces Pool application range:
Residential quarters, office buildings, hotels, hospitals, public places, etc
