Polychlorinated by high chloride Vinyl resin 、 epoxy resin 、 Plasticizer , Yan filler 、 auxiliary , anti rust pigment, solvent, etc High chlorinated primer two in one paint 。
Main characteristics:
*The paint film is tough, with good sealing performance and excellent antirust performance.
* Excellent water resistance, dry wet alternation resistance.
*Good weather resistance, alkali resistance, acid resistance, salt resistance medium, good anti-corrosion performance.
*Good low-temperature construction performance, can be used in the environment of - 20 ℃ - 50 ℃.
*Fast drying and short construction period.
*The material and labor for primer coating are omitted, and the effect of rust prevention and corrosion prevention is remarkable.
Purpose:
* It is widely used for anti-corrosion protection of ships, port facilities, bridges, containers, petrochemical equipment and concrete.
Color and appearance:
* All colors and paint film appearance are normal.
Basic parameters:
* Specific gravity: about 1.17kg/L (after mixing)
* Dry film thickness: about 35um
* Theoretical dosage: about 162g/m ² (based on 35um dry film, excluding loss)
* Flash point: about twenty-nine ºC
* Drying time: surface drying ≤ 1h , dry ≤ 8h 。
Recoating interval: substrate temperature 0 ℃ 20 ℃ 30 ℃
Shorter 24h 8h 6h
Long unlimited unlimited unlimited
Recommended coating number:
*2-3 Avenue.
Front supporting substrate:
High chloride red paint, high chloride micaceous iron paint, epoxy zinc rich paint, epoxy micaceous iron paint, etc.
Surface treatment:
* Brush directly on the steel surface. If there is oxide skin, it needs to be shot blasted or sand blasted to the derusting standard Sa2.5 Grade, if there is no oxide scale, shot blasting or sand blasting can be carried out to the derusting standard Sa2.5 Level or grind to St3 Level.
* Remove all oil stains and sundries, and there is no condensation of acid, alkali, salt and water.
Construction conditions:
*The relative humidity must be less than 85%.
* Attention shall be paid to the change of weather and temperature during construction. When it rains, fogs, snows and it is hot in summer, it is not suitable for construction under direct sunlight 。
Coating construction:
* Mixing: This product is divided into single cans. When using, it must be fully stirred evenly, and special diluent can be used to adjust the viscosity.
* Airless spraying: diluent: special diluent for high chlorination series.
Dilution amount: 0-5% (by weight of paint)
Nozzle diameter: 0.4mm-0.5mm
Ejection pressure: 20MPa-25MPa(200kg/ cm²-250kg/cm²)
* Air spraying: diluent: special diluent for high chlorination series.
Dilution amount: 10-15% (by weight of paint)
Nozzle diameter: 1.5mm-2.0mm
Ejection pressure: 0.3MPa-0.4MPa(3kg/ cm²-4kg/cm²)
* Roll coating: diluent: special diluent for high chlorination series
Dilution amount: 5-10% (by weight of paint)
* Cleaning agent: special diluent of high chlorination series
matters needing attention:
* This product should be used by professional coating operators according to the instructions on the product package or this manual.
* All work of coating and using this product must be carried out in accordance with various relevant national health, safety and environmental protection regulations and standards.
* If you have any doubt about the use of this product, please contact our technical service department for details.
packing:
* 20kg Drum
keep in storage :
* Store in a ventilated and dry place, avoid sun exposure, and store effectively twelve Months, beyond the storage period, it can still be used after passing the inspection.