Art Floor (Die floor, embossed floor) - manufacturer pin
Product details:
Pressing mold floor floor thickness | 3-4cm |
Compression resistance of compression molding floor strength | ﹥ 56.0Mpa |
Bending resistance of pressing mold floor strength | ﹥ 11.5Mpa |
Tension of pressing mold floor strength | ﹥ 33Mpa |
Pressing mold floor Wear resistance ratio | 58% |
Pressing mold floor surface hardness | ﹥ six (Mohs twenty-eight ) |
Pressing mold floor Antiskid coefficient | ﹥ 0.67(OSHA) |
1、 What is an art floor?
Art floor is also called press molding floor, and embossed floor is made of special wear-resistant mineral aggregate with high grade cement The color floor hardener composed of inorganic pigments and polymer additives can produce remarkable stone texture and rich color effect on the concrete surface through construction processes such as molding, finishing, sealing treatment, etc.
2、 Features and advantages of artistic floor:
The advantages are easy construction, one-time molding, long service life, fast construction, convenient repair and no fading
It is characterized by wear resistance, skid resistance, frost resistance, dust resistance, easy cleaning, high degree, impact resistance, wide selection in color and style, low cost and environmental protection
3、 Applicable scope of pressing mold floor:
It can be widely used in villas, small buildings, holiday villages, bars, cafes, hotels, cultural and entertainment places, golf courses, commercial squares, outdoor parking lots, gardens , courtyard , indoor and outdoor concrete floors such as the living room hall.
4、 Construction steps of formwork pressing floor
1. Roughening treatment of concrete surface: add 1cm cement slurry before initial setting of concrete surface and use manual iron plate to evenly level the cement mortar on concrete surface and roughen the surface.
2. Spreading hardening materials: evenly spread 2/3 of the specified amount of hardener molding floor on the concrete surface at the initial setting stage. After the hardening materials are soaked by water, use the manual iron plate for leveling and leveling to complete the previous operation. After the hardening materials have reached a certain initial setting stage, carry out the second 1/3 material spreading, polishing and leveling operation.
3. Leveling, polishing and hardening materials: according to the hardening condition of concrete, at least three times of manual polishing and leveling of iron plate shall be carried out, and the polishing operations shall be staggered.
4. Spreading of release powder: evenly spread a layer of release powder matching the hardening material at a certain initial setting stage when the surface is dry without obvious moisture.
5. Use the mold to press the pattern, and keep the mold fixed and flat. The pressed pattern should be shaped at one time and cannot be pressed again.
6. Realize various design styles, textures and colors.
![](https://img1.bmlink.com/big//supply/2013/7/29/14/00447212718635431.jpg)
5、 Floor maintenance and requirements
1. The construction of hardened molding floor materials is generally carried out outdoors, which should be prevented in rainy and windy days. The construction ambient temperature is generally above 2 degrees.
2. Flushing the floor surface: the surface can be cleaned with water or detergent at least 2-3 days after the hardened molding floor is completely dry and solidified. The cleaning surface must ensure that the cleaning degree of the entire floor is consistent, otherwise the color of the floor will be different.
3. Application of curing agent: after the surface of the cleaned and hardened die pressing floor is completely dry and free of moisture, at least one day can be used to apply the liquid curing agent to make the surface of the hardened die pressing floor anti pollution and anti slip and strengthen again. In addition to good decoration, the physical properties of the post hardening molding floor are also very stable.
Shanghai Panshi Landscape Engineering Co., Ltd, Located at Xinyuan Road, Shanghai Xinzhuang High tech Park. The transportation is convenient. It is 20 kilometers away from Hongqiao Airport and 35 kilometers away from Wusong Wharf. It mainly produces and sells colored floors (permeable floors, embossed and molded floors, etc.). The product price is reasonable, the quality is excellent, and the service is considerate. Our aim is to think for customers and realize mutual benefit. Welcome to consult!
Contact: Shanghai Panshi Landscape Engineering Co., Ltd
Tel: * * * (Miss Li)
Company Tel.: * * */52277021/52277022