This machine is applicable to the requirements of (gb-11017) and (gb-12706) test standards. It is a necessary test instrument for preparing samples of cross-linked cables and control cables' insulation and sheath. It is also used to complete the thermal extension test and tensile test of samples, so as to meet the standard requirements of products;The sliding part of the equipment is equipped with dovetail groove for machine tool and precision drive screw to make the equipment run more smoothly and prepare.
￥42800.00Model: YD-2508BUpdated on: June 14, 2024Product Catalog
The rotary microtome yd-2508b is an improved version of the original yd-1508 series by our company to meet the needs of customers at home and abroad.This machine can directly use the secondary blade, and the wide and narrow secondary blades can be used, which is convenient and simple.★ The machine adopts international technology - precision ball cross guide rail pair, which is easy to operate, wear free and maintenance free.
￥ ElectricityModel: LYCN/LWY-84BUpdated on: June 14, 2024Product Catalog
The temperature controlled far-infrared digestion furnace uses a new far-infrared element as the heating body. According to the fact that the far-infrared radiation element mainly radiates 1.5-2.5 μ m far-infrared after being heated, which is easy to be absorbed by the heating body and stimulate molecular resonance, causing the temperature of the heating body to rise, so as to accelerate the digestion of the digested samples.It is suitable for the departments of agriculture, forestry, environmental protection, geology, petroleum, chemical industry, food, etc., as well as colleges, universities, scientific research departments to sterilize plants, seeds, feed, food, soil, ore and other samples before chemical analysis;It can be used together with nitrogen determination instrument.
￥ ElectricityModel: QP-10Updated on: June 14, 2024Product Catalog
This machine is used for cutting plastic samples in rubber factories, rubber research institutes and other units. 16 ring knives and two 100 single blade round knives are used to cut the standard pattern with a diameter of 16mm and a thickness of 10mm. It does not need to replace the cutter. It is easy to operate and makes the performance reliable
Structure of special slicer for hard foam sample: its main structure includes sample placement slot, sample slice thickness adjuster, sample tightening screw. The function of sample prevention adjuster is to place samples and adjust the thickness of sample slices
￥ ElectricityModel: American Buehler EcoMet™ thirtyUpdated on: June 14, 2024Product Catalog
Ecomet 30 polishing machine provides simple automatic operation for daily polishing.The friendly touch screen interface can display all frequently used functions on the screen, which can greatly save time wasted due to complex operations.The one button cleaning function of ecomet 30 saves time for customers who need to change the polishing process every step.The 2500 hour durability test proves that it can be flexibly compatible with 8in [203mm]/10in [254mm]/12in [305mm] grinding discs.
￥ ElectricityModel: Campden 7000smzUpdated on: June 14, 2024Product Catalog
Tissue vibration microtome selects different microtome according to different applications: 1. Visual patch clamp requires high-quality brain slices, 7000smz-2 is recommended, and the z-axis deviation is submicron.2. Hot slice patch clamp, requiring tissue slice at physiological temperature, 7000smz-2 is recommended.3. Common patch clamp experiments, such as extracellular recording, local field potential, blind patch clamp, are recommended to be 5100mz, with preferential price and remote operation control box.
Sentech integrated plasma etching and deposition multicavity system sentech integrated plasma etching and deposition multicavity system, sentech multicavity system includes plasma etching and/or deposition chamber, transport chamber, pre vacuum chamber or cassette station.The transfer chamber includes a transfer manipulator, which can be used for three to six ports.Up to two cassette stations can be used to increase production.The transfer chamber can be equipped with a variety of options.
￥ ElectricityModel: K1100Updated on: June 14, 2024Product Catalog
Cation exchange capacity tester 1. Fully automatic distillation, titration, calculation, printing, waste discharge and cleaning system, automatic waste discharge and cleaning functions in one;2. The digestion tube has automatic waste discharge and cleaning function, and the titration cup has automatic waste discharge and cleaning function;3. External titration cup design, the titration system uses linear motor micro control titration system;4. With fault self inspection, prompt of insufficient condensed water, and safety valve out of position
Small evaporation coating instrument and laboratory vapor deposition equipment are used for vacuum evaporation of optical films, organic films and metal films, and deposition of single layer metal films on the substrate, which are mainly used for experimental research on physical and chemical properties of evaporation and electroplating and organic semiconductor materials.It is especially suitable for high-tech enterprises, scientific research institutions and universities to use for film research and film system development.
Jxfm110 hammer type cyclone mill is a kind of crushing equipment with beautiful appearance, compact structure, simple operation, stable operation and durability.High speed, high efficiency, fine comminution.The sample is hammered into fine and uniform powder by high-speed grinding, and then enters into the integrator with high-speed airflow through stainless steel screen to prepare the sample.
Xjy ii pneumatic punching machine is used for punching standard rubber test pieces before tensile test in rubber, plastic, wire, cable, rubber hose and other industries and scientific research institutions.For similar materials, this machine can also punch.Pneumatic control, easy, fast and labor-saving operation.
Shanghai Bingyue brand series digestion furnace is a complete set of rapid protein content determination device that combines chemistry and physics, combining the needs of the mainland, applying the principle of digestion furnace determination method, and providing ideal detection equipment for the detection departments of grain, food, feed, agriculture, commodity inspection, etc. The several nitrogen determinators produced by our company are stable in performance after years of continuous improvement,The determination is fast and accurate.
￥ ElectricityModel: Xiangke Instrument SDJUpdated on: June 12, 2024Product Catalog
Xiangke instrument sdj manual hydraulic prototype tablet press is mainly suitable for real room pressing of sheet samples in ceramic enterprises, chemical medicine, universities, scientific research institutions, etc.
￥ ElectricityModel: MTSH-9Updated on: June 11, 2024Product Catalog
This machine is a non-metallic material testing instrument designed and manufactured according to new international standards and national standards. It is mainly used to measure the thermal deformation temperature and Vicat softening point temperature of non-metallic materials such as plastics, hard rubber, nylon, electrical insulation materials, long fiber reinforced composites, high-strength thermosetting laminates, etc.
￥54000.00Model: HM-WB10Updated on: June 11, 2024Product Catalog
The microwave digestion instrument provides a fast, safe and automatic solution for samples. It speeds up the sample digestion reaction under high pressure conditions, and is widely used in food, environmental protection, disease control, quality supervision, commodity inspection, scientific research institutions and other fields.
20t electro-hydraulic tension and compression testing machine (with protective cover) I. Introduction The main machine of 20t electro-hydraulic tension and compression testing machine is a two column, two lead screws, and oil cylinder bottom mounted type. The tensile space is above the main machine, and the compression and bending test space is located at the lower beam and workbench of the main machine
Tg-9 geosynthetics vertical penetrometer is developed and designed according to the national standards of jtge50-2006, iso11508:1999 geosynthetics plane water flow.It is applicable to the measurement of vertical permeability of various geotechnical materials, with stable performance, convenience and practicality
Ysd-13 rock elastic mold testing machine is a microcomputer controlled rock elastic modulus testing machine, which is suitable for compression test under rated test force and can test elastic modulus of rock.
Gby-11 electrohydraulic punching machine is used to cut various waterproof materials.The hydraulic drive is used for operation, with smooth operation process, high efficiency, low working voice, long operating life and other highlights.
Hqp-150 concrete core slicing machine manufacturer price, concrete core cutting machine use!This machine is widely used for the quality inspection of construction projects and the sawing of core samples taken by the coring method for the quality inspection of highway projects.It is suitable for sawing irregular core samples at both ends to make the core sample have regular two ends and the required length.This machine is equipped with a special clamp, which can ensure the reliable clamping of the test piece and the flatness of the sawing end face. The diamond saw blade used in this machine has the characteristics of good rigidity, long service life and high cutting efficiency, so it is widely used for sawing the sample in concrete testing.It can also be used for sawing special-shaped bricks in construction
Dtq-5 low-speed precision cutting machine is suitable for precise cutting of all kinds of hard materials, especially for precise cutting of various small metal, non-metallic components and various electronic components;This machine can be equipped with diamond saw blade or resin saw blade made of other materials to meet the requirements of cutting various samples
Mopao1000 automatic grinding/polishing machine is manufactured according to international standards and international technology.This machine has the characteristics of high processing precision, stable and reliable performance, easy operation, wide processing range, automatic working process, etc. It is an ideal metallographic processing instrument.
￥1200.00Model: Milestone microwave tube 41Updated on: June 6, 2024Product Catalog
Ethos up innovatively adopts multiple safety monitoring systems, which can observe and monitor everything in the microwave cavity in real time from the terminal through the full color camera system, and can also observe from the side of the host through the explosion-proof and radiation proof safety window, giving the operator safety monitoring from any angle and any distance.The intelligent door lock automatically controls the locking of the door body to prevent the door body from opening at will, with a high level of protection!
￥ ElectricityModel: EcoMet 250/300/prUpdated on: June 5, 2024Product Catalog
The led film button or color LCD touch screen control equipment provides the control of the Axis grinding amount, and the built-in preparation method database Grinding plate size 8 "(203mm), 10" (254mm) and 12 "(305mm) are available for selection Grinding plate and working head speed adjustable Unique led lighting equipment can provide lighting for grinding plate, working plate, sample and working area Sample preparation results repeatability high torque motor,Can carry out various material preparation work ecomet 2
￥ ElectricityModel: HY (CP)Updated on: June 4, 2024Product Catalog
Hy_ (cp) sheet puncher is a kind of blanking equipment for making various non-metallic films, films and other test strips.Simple structure and convenient operation.
￥ ElectricityModel: NAI-WB44Updated on: June 4, 2024Product Catalog
The specifications of infrared temperature measurement high-throughput intelligent microwave digestion instrument include: nai-wb40, nai-wb44 and other more sample quantities.The microwave digestion instrument adopts microwave non pulse continuous automatic frequency conversion control, which extends the service life of the instrument and the uniformity of electromagnetic waves. The chamber is specially made of large volume stainless steel chamber material, and the self-locking buffer explosion-proof furnace door. When the reaction is abnormal, the buffer structure ensures the personal safety of the operator and the integrity of the furnace door structure. The furnace door and the chamber are closely combined,Microwave leakage complies with national standards.
￥ ElectricityModel: CM1950Updated on: May 31, 2024Product Catalog
Leica cm1950 frozen microtome must be safe when using the frozen microtome. Therefore, each leica cm1950 frozen microtome has a variety of safety functions, including certified UV disinfection, which can effectively reduce pathogen pollution, including sars cov-2
￥ ElectricityModel: MT990Updated on: May 31, 2024Product Catalog
The pt-3d sample with a large advance stroke of 1mm can be sliced into ultrathin sections with a total thickness of 1mm.This unique advantage is particularly conducive to 3D reconstruction, sequence slice imaging, and in any case, precision sample slices involving a large amount.
The characteristics of the micro quantitative feeder: high reliability frequency conversion speed regulation technology, wide belt, thick material layer, low speed operation, so it has a stable operation, close to static measurement accuracy.The dynamic measurement accuracy is better than 1.0%;The static measurement accuracy is better than 0.5%, and the precision type can reach 0.125%.
Member service consultation: 0571-85363692 Customer service hotline: 0571-85363692 Purchase hotline: 0571-85363691 Purchase technology exchange group number: 187637045
