￥ ElectricityModel: MPMS3Updated on: June 14, 2024Product Catalog
Mpms3 is the latest generation of magnetic measurement system. mpms3 combines the advantages of mpms xl and squid vsm magnetic measurement system.Although the appearance of the mpms3 system is similar to that of squid vsm, the system has been redesigned. At the same time, it has the high-speed and high-precision measurement of squid vsm, as well as the dc measurement mode, raw data function and point to point measurement function of mpms xl.
￥ ElectricityModel: WSD-3Updated on: June 12, 2024Product Catalog
Wsd-3c automatic whiteness meter is mainly used for whiteness detection of raw materials and products such as ceramics, building materials, paper making, talc, kaolin, etc.
￥ ElectricityModel: TSY-8Updated on: June 12, 2024Product Catalog
Tsy-8 geosynthetic impermeability meter geosynthetic intelligent hydrostatic pressure resistance according to jtge50, gb/t19979.1 geosynthetic anti-seepage performance.Anti-seepage performance of geosynthetics for hydrostatic pressure resistance gb/t19979.2-2006.National standard R&D design of permeability coefficient.It is applicable to the measurement of impermeability of various geotechnical materials, with stable performance, convenience and practicality.
￥ ElectricityModel: MTSY-7Updated on: June 11, 2024Product Catalog
This tester is designed and manufactured according to ISO/dis 10545/7-1994 Ceramic Tiles - Test Method for Surface Abrasion Resistance of Glazed Ceramic Tiles and GB/T3810.7-2006 Test Method for Abrasion Resistance of Glazed Ceramic Tiles.Put a certain amount of abrasive on the glaze of ceramic tile, grind the abrasive on the glaze, and visually compare the difference classification of the polished sample glaze.
￥ ElectricityModel: YW-200AUpdated on: May 30, 2024Product Catalog
Ywyw-200a full-automatic digital display surface tensiometer has special structure, stability and durability, beautiful appearance, high degree of automation, accurate test results and strong repeatability.It has special structure, stable and durable, beautiful appearance, high automation, accurate test results and strong repeatability.SY-T5370 Determination of Surface and Interfacial Tension, gbt 18396-2001 Determination of Surface Tension of Natural Rubber Latex by Ring Method, gbt 6541-86 Determination of Oil water Interfacial Tension of Petroleum Products (Ring Method), q
￥ ElectricityModel: AutoflowBET+Updated on: April 23, 2024Product Catalog
In July 2017, the high-throughput specific surface area analyzer autoflow was officially released.As a high throughput specific surface area analyzer designed based on dynamic method technology, autoflow uses different standard methods (such as bet and stsa) when using single point method or multi-point method to calculate specific surface area, which makes analysis simpler and faster, and can achieve complete independent analysis of 36 different samples per hour.It has a wide analysis range, and can realize the area analysis and pore volume characterization of microporous materials.
￥ ElectricityModel: Acorn AreaUpdated on: April 22, 2024Product Catalog
Particle surface characteristic analyzer is a particle interface characterization and evaluation device, which is a new product with revolutionary design. It can test the dispersity of particles in suspension, emulsion, small to nanometer size, and measure the specific surface area of particles in wet state
￥ ElectricityModel: JC505-HSRS-45Updated on: April 10, 2024Product Catalog
Main featuresThe spindle system adopts a friction free spindle structure, and the application of the initial test force is controlled by the electromagnetic brake, thus improving the accuracy of the initial test force.
Shanghai Xiangshu Oumao Electromechanical Equipment Co., Ltd. is a service trader in the field of industrial control automation in China. With a German branch, it is committed to providing domestic customers with high-quality and low-cost industrial control automation products, instruments, spare parts, etc. produced in Germany and Europe.Purchase in Europe through the German branch, and the German branch will make a single shipment every Sunday and handle import procedures in a centralized manner, saving you freight, customs clearance and other costs;At least air shipment times a week to shorten the delivery time for you;You can trade in RMB, US dollars or euros, giving you diversified choices.We look forward to working with you to create a better tomorrow!
￥ ElectricityModel: F-Sorb 2400CESUpdated on: April 7, 2024Product Catalog
F-sorb 2400ces dynamic chromatography specific surface area meter high temperature and high pressure gas adsorption instrument dynamic chromatography specific surface area meter uses the chromatography principle, uses the thermal conductivity cell as the detector, generally uses nitrogen as the adsorbent, helium as the carrier gas, and realizes multi-point bet test by changing the gas partial pressure.
Brinell specific surface area meter, Brinell specific air permeability surface area meter, Brinell specific surface area meter, and cement specific surface area meter [Overview] The fbt-9 liquid crystal Brinell specific air permeability surface area meter is mainly made according to the relevant provisions of the national standard GB 8074-2008 Method for Determination of Specific Surface Area of Cement, and with reference to the American astmc204-75 air permeability method.
￥ ElectricityModel: PQ001Updated on: April 1, 2024Product Catalog
Pq001 particle surface characteristic analyzer is an instrument used for particle surface characteristic analysis. It is equipped with industrial test software, which is convenient and fast. Humanized software operation ensures efficient test efficiency.Pq001 particle surface characteristic analyzer has integrated advanced technology in appearance design, hardware configuration and software operation, and has been constantly improving, ensuring the combination of excellent product performance and friendly customer experience.
￥ Electricitymodel:Updated on: March 26, 2024Product Catalog
Beishide Instrument Technology (Beijing) Co., Ltd. produces (supplies) and sells series of products of gas adsorption, full-automatic volumetric adsorption instrument and surface physical property analyzer manufacturers. The company has a good market reputation. The sales and technical service team of the industry is familiar with and understand the market situation of the specific surface series by virtue of years of experience in operating the specific surface instrument and full-automatic volumetric adsorption instrument,Welcome to the unanimous praise of domestic and foreign manufacturers. Welcome to call us to negotiate and exchange!
￥ ElectricityModel: BSD-PHUpdated on: March 26, 2024Product Catalog
Ultra high pressure 69mp full-automatic high-temperature and high-pressure gas adsorber The principle sample of the full-automatic high-pressure gas adsorber developed by our company is placed in the sample tube, and the inert gas (such as helium) used for calibration is filled first to calibrate the volume occupied by the sample and the remaining free space volume (dead volume) of the sample tube, and then a certain amount of adsorbate gas is filled into the sample tube (gas feeding),When the adsorption is balanced, the software will automatically record the adsorption amount under the pressure value at this time.Then repeat this operation automatically until the expected pressure value is reached.The adsorption isotherm is obtained by plotting the pressure value corresponding to the adsorption capacity.
￥ ElectricityModel: JW-BK200Updated on: March 26, 2024Product Catalog
Jw-bk200 series full-automatic dual station specific surface area analyzer completely inherits all the technical features of jw series aperture analyzer and makes independent and unique innovation.This instrument is equipped with a "turbo molecular pump" and a 1/0.1 torr small range pressure sensor. With the accurate application of the micropore analysis model, it realizes the accurate analysis of micropores. The actual small pore size of nitrogen adsorption micropores can be measured to 0.35nm. The test results are accurate, accurate, stable, and cost-effective
￥ ElectricityModel: BSD-PSUpdated on: March 26, 2024Product Catalog
Bsd ps specific surface area and pore size micropore analyzer increases the adsorption equilibrium pressure by gradually adding adsorbate gas, and obtains the adsorption isotherm;The desorption isotherm was obtained by gradually extracting adsorbate gas to reduce the adsorption equilibrium pressure;Relative dynamic method, without carrier gas (he) and repeated lifting of liquid nitrogen cup
￥ ElectricityModel: BSD-PSUpdated on: March 26, 2024Product Catalog
Bsd ps specific surface area and pore size micropore analyzer increases the adsorption equilibrium pressure by gradually adding adsorbate gas, and obtains the adsorption isotherm;The desorption isotherm was obtained by gradually extracting adsorbate gas to reduce the adsorption equilibrium pressure;Relative dynamic method, without carrier gas (he) and repeated lifting of liquid nitrogen cup
￥ ElectricityModel: BSD-PSUpdated on: March 26, 2024Product Catalog
Bsd ps specific surface area and pore size micropore analyzer increases the adsorption equilibrium pressure by gradually adding adsorbate gas, and obtains the adsorption isotherm;The desorption isotherm was obtained by gradually extracting adsorbate gas to reduce the adsorption equilibrium pressure;Relative dynamic method, without carrier gas (he) and repeated lifting of liquid nitrogen cup
￥ ElectricityModel: JC503-S35Updated on: March 12, 2024Product Catalog
Jc503-s35 specific surface area analyzer is based on the relevant theory of surface physical adsorption, and adopts the continuous flow method proposed by nelsen and eggertsen as the measurement method. The sample tube is immersed in liquid nitrogen using a helium nitrogen mixture (helium: nitrogen=4:1, helium as the carrier gas, nitrogen as the adsorption gas)
￥ ElectricityModel: SSA-7300Updated on: March 4, 2024Product Catalog
Ssa-7300 series pore size and specific surface area analyzer is a high-performance physical adsorption analyzer that can be used in the field of micropore;It has a more comprehensive theoretical model and excellent test accuracy to meet the needs of scientific research, academic discussion and other applications
￥ ElectricityModel: GCFT-1000Updated on: 2024-1-23Product Catalog
The shell of the powder comprehensive physical property tester is made by sheet metal process, and the surface of the product adopts the environmental friendly and pollution-free electrostatic spraying technology, which greatly improves the wear resistance and corrosion resistance of the product.The measuring tools and vibration elements used in the instrument are all made of stainless steel by finishing machining;High precision digital display timer is used to ensure stable, accurate and reliable test data.This product is versatile, easy to operate and has good repeatability, which provides convenient conditions for scientific research institutes and their production enterprises to measure the physical properties of powder and particle materials.
The high-precision specific surface area analyzer can be used to analyze the specific surface area of battery materials, test the specific surface area of catalyst materials, determine the total surface area and external surface area of carbon black, etc. It is widely applicable to the material research of universities and scientific research institutes, and product quality monitoring of powder material manufacturers. The 3h-2000 series full-automatic nitrogen adsorption specific surface area analyzer developed and produced by our company is a well-known brand in China,It entered the market in 2000. After years of continuous R&D and innovation, its performance has reached the domestic leading and international advanced level. Many of its performance indicators exceed the imported instruments, and it is a high-precision instrument for measuring specific surface area in China.
Bsd lnt type ultra-low temperature constant temperature system is a constant temperature system that uses liquid nitrogen and liquid nitrogen steam for low temperature control. It can accurately achieve a wide range of ultra-low temperature constant temperature from liquid nitrogen temperature - 195.8 ℃ to 200 ℃
1. The liquid nitrogen pumping speed is 0~5l/min, which is not adjustable;2. Electromechanical turbine structure, one button liquid nitrogen, lift>3m;3. Standard 30l liquid nitrogen container (50mm diameter);4. With large capacity lithium battery, the battery power can be seen, and the liquid nitrogen can be pumped more than 200l after a single charge;
Bsd ps specific surface area and pore size micropore analyzer increases the adsorption equilibrium pressure by gradually adding adsorbate gas, and obtains the adsorption isotherm;The desorption isotherm was obtained by gradually extracting adsorbate gas to reduce the adsorption equilibrium pressure;Relative dynamic method, without carrier gas (he) and repeated lifting of liquid nitrogen cup
◆ 2 groups of independent degassing stations, 6 degassing positions for each group, 12 degassing positions in total;◆ Two groups of independent degassing stations can be set with different degassing temperatures to facilitate simultaneous degassing of different types of samples;◆ Degassing temperature standard configuration 400 ℃, temperature control accuracy ± 0.1 ℃;
High efficiency: the bsd-bet400 cooperates with the bsd-ad8 eight station preprocessor, and the analysis capacity can reach 12 samples/hour, including 30 min pretreatment;Free standard sample: free standard sample, completely eliminate the impact of standard sample, and reduce the test cost;High resolution: for small and medium specific surface samples, it is suitable for rapid specific surface analysis of battery materials, metal powders, organic powders and other materials.
￥ ElectricityModel: FT341SJBUpdated on: 2024-1-2Product Catalog
Battery material bipolar plate material contact resistance tester is used to measure and analyze the resistivity of bipolar plate material body and the contact resistance between bipolar plate and carbon paper. 4.3 inch LCD screen displays: resistance, resistivity, square resistance, temperature, unit conversion, temperature coefficient, current, voltage, probe shape, probe spacing, thickness, conductivity, resistivity, pressure,Automatic measurement mode.
￥11000.00Model: BETA201AUpdated on: December 25, 2023Product Catalog
1) Applicable products include measuring building materials, graphite, battery materials, zeolite, carbon materials, molecular sieve, alumina dioxide, soil, organic compounds and other powders, as well as various blocks, sheets, polymer fibers, etc.2) Powerful, including all data processing methods: single point and multi-point bet specific surface area.Langmuir specific surface area.Particle size estimation and true density test, porosity and porosity analysis.
The display unit of easy baser e920 flatness measuring instrument has a large and clear "5.7" color screen.These programs guide you step by step through the measurement process, which makes it easy for even inexperienced users.The system can provide complete documents, directly generate pdf reports, and database programs for pc.
Member service consultation: 0571-85363692 Customer service hotline: 0571-85363692 Purchase hotline: 0571-85363691 Purchase technology exchange group number: 187637045
