The touch screen of Japan's (hitachi aloka) ics-1323 ionization chamber patrol meter can be operated by pressing the key to measure the dose rate/cumulative dose of leaked x-ray and display the convenient data about low-energy correction (optional). The function of ics-1323 ionization chamber patrol meter: because the x-ray leakage measurement has good sensitivity from the low-energy section, the patrol meter is particularly suitable for medical treatmentHealth and other industries measure the leaked X-ray.In addition, you can also use the scaler mode to set the
The Japanese Hitachi aloka ics-1323 ionization chamber patrol meter is particularly suitable for measuring leaked x-rays in medical, health and other industries because it has good sensitivity from the low energy region.In addition, the accumulated dose in the fixed area can be measured within the set time through the scaler mode.Dose rate and cumulative dose are displayed at the same time, and cumulative dose can be displayed at the same time.The device can measure the cumulative dose while observing the dose rate in the place with high dose, omitting the procedure of switching the screen.
￥9000.00Model: TH-SQX1Updated on: May 29, 2024Product Catalog
The th-sqx1 tunnel ultrasonic wind speed and direction detector is tunnel application type. The detection probe is installed on the tunnel wall to provide the tunnel general control room with the detection value of wind speed and direction in the tunnel as the basic basis for ventilation and operation.The detector can observe the operation status and detection data of the instrument in real time on site. At the same time, the analog and switching value signals output by the data output interface can be connected to the local PLC in the nearby sub control room, and then connected to the main control room through the data optical transceiver and optical fiber.
￥24000.00Model: TH-EL1Updated on: May 29, 2024Product Catalog
Photovoltaic power station tester is used to test the quality and performance of solar cell modules in photovoltaic power stations.It usually uses electric color measurement, visual inspection, current/voltage scanning and other technologies to evaluate the structural integrity, efficiency and performance of solar cell modules.Test the output power of the PV module or the whole power station to ensure that it meets the design requirements and relevant standards.Measure the conversion efficiency of photovoltaic modules to understand their performance and optimize their design.Through testing and data analysis, find and locate the faults of photovoltaic modules or the whole power station, and improve the operation efficiency and reliability of the power station.
￥ Electricitymodel:Updated on: April 24, 2024Product Catalog
trimble® dini®The digital level is a digital range measuring sensor in the trimble integrated surveying tm series.Trimble dini is a field proven measuring tool, and its design is suitable for any kind of engineering requiring fast and accurate process information.Trimble dini can be used for precise leveling of plane and slope, establishing process information of slope and ground contour, settlement monitoring and establishing process of control network.
￥ ElectricityModel: DYM1/DYM1-1Updated on: 2024-1-2Product Catalog
The dym1/dym1-1 moving trough mercury barometer is used to measure atmospheric pressure in meteorological stations, stations and other relevant departments. The instruments are divided into plain and plateau types.Measurement range of technical parameters: 810hpa-1070hpa (dym1 type) 520hpa-890hpa (dym1-1 type)
￥12800.00Model: FT-FZ1Updated on: November 10, 2023Product Catalog
The negative oxygen ion monitor in the park can monitor the concentration of negative oxygen ions in the air all day long. At the same time, the monitoring items can be expanded according to user needs, such as air temperature, air humidity, pm2.5, pm10 and other meteorological elements;Modular structure design, sensors can be replaced separately, equipped with industrial installation brackets, and data can be read directly through the led screen on site, and can also be viewed in real time on the remote cloud platform/web/WeChat official account, which is convenient for later operation and maintenance.
￥ ElectricityModel: ZXCAWS500Updated on: June 14, 2024Product Catalog
The zxaws500 3d atmospheric aerosol lidar measures the content of particles in the air according to Bill Lambert's law. The zxaws500 3d atmospheric aerosol lidar can be used to study the impact of the direct radiation intensity of atmospheric aerosols on the earth's climate. Its small space resolution is 4.5 meters, with ip65 protection, etc., and supports wireless data transmission. It is an important remote sensing equipment for atmospheric monitoring.
￥21800.00Model: JYB-FYUpdated on: June 14, 2024Product Catalog
The system consists of atmospheric negative oxygen ion monitoring system, meteorological environment monitoring system, data display and analysis system, early warning control system, wireless transmission system, background data processing system and information monitoring management platform;The data platform is a networked platform with Internet architecture, which has the monitoring function for monitoring stations, as well as the alarm processing, recording, query, statistics, report output and other functions for data.
￥ ElectricityModel: CRC®-PC SmartUpdated on: September 15, 2023Product Catalog
Capintec crc of®-The PC smart ionization chamber is not only equipped with a high measuring chamber of capintec *, but also adopts an innovative web-based user interface, which is sufficient to meet the current business needs.The remote connection and network ready interface enable the capintec crc®-PC smart has become a technology in the field of dose calibration
￥ ElectricityModel: OSEN-6CUpdated on: March 3, 2023Product Catalog
The osen-6c dust and noise linkage equipment continuously and automatically monitors the parameters of noise, dust, meteorology, etc., and collects data. The monitoring data can be reported to multiple cloud servers/monitoring centers such as environmental protection and construction enterprises at the same time. The system supports docking with other platforms, and supports communication protocol, database, opc and other docking methods.
Shanghai to Datong moving company ★ Shanghai logistics special line, ★ choose the best service,... the best... the cheapest Shanghai moving company) Shanghai Benai Logistics Co., Ltd., consulting (Manager Tan) Shanghai Benai Logistics Co., Ltd. Welcome to inquire, Shanghai long-distance moving company, Shanghai logistics special line, Shanghai logistics company, Shanghai freight company, Shanghai freight transportation,Shanghai logistics transportation, Shanghai freight special line, vehicle less than carload transportation, equipment transportation, large and small pieces transportation, moving transportation.
￥ ElectricityModel: DC-DYUpdated on: October 11, 2013Product Catalog
Atmospheric pressure sensor is a professional measuring instrument used to measure ambient atmospheric pressure.The piezoresistance principle is used to measure the atmospheric pressure and output the corresponding digital or electrical signals.It is widely used in meteorology, agriculture, storage, breeding, scientific research and other fields.
￥ ElectricityModel: XNHK-XE663AUpdated on: July 29, 2012Product Catalog
Barometer is an instrument specially used to measure ambient atmospheric pressure.The instrument adopts high-precision atmospheric pressure sensor, which has the characteristics of wide measuring range, measured value, intuitive display, convenient use and maintenance.It can be widely used in colleges and universities, agriculture/forestry, meteorological stations and other units to measure atmospheric pressure, as well as in plain and plateau areas.
￥ Electricitymodel:Updated on: December 12, 2011Product Catalog
The salt spray corrosion test chamber is one of the "three prevention" (damp heat, salt spray, mold) test equipment in the artificial climate environment, and it is the equipment to simulate the dispersion system composed of small saline droplets in the atmosphere.It is widely used for salt spray corrosion tests on the plating and coating of electronic, electrical and automobile, motorcycle, hardware tools and other products, parts, metal materials and products.The performance index meets the requirements of gb/t5170.8 "verification method for basic parameters of environmental testing equipment for electrical and electronic products".The salt spray corrosion test chamber can be designed and manufactured in accordance with GB/T2423.17 Basic Environmental Test Procedures for Electronic and Electrical Products Test ka: Salt Spray Test Methods. This series of products are designed and manufactured in accordance with GB/T10587 Technical Conditions for Salt Spray Test Chamber.And equivalent iec, din, mil, astm, etc
Member service consultation: 0571-85363692 Customer service hotline: 0571-85363692 Purchase hotline: 0571-85363691 Purchase technology exchange group number: 187637045
