Introduction : This article is about Architectural Decoration Thesis The model text has about 3000 characters, and the main topic is about the discussion of architectural decoration engineering design and technical management. For the development of architectural decoration engineering, the relevant technical management work is the most important and plays a decisive role in promoting the development of architectural decoration engineering.
Publish the paper and contact Mr. Li（ QQ/WeChat: see the top of this article ）Low price!
author : Ma Xuewen
abstract : Architectural decoration engineering technology refers to the design and construction of the interior of the building, so as to make it more beautiful and improve people's quality of life. In recent years, with the development of real estate, building decoration engineering has also been developed rapidly, becoming a sunrise industry. For the development of architectural decoration engineering, the relevant technical management work is the most important and plays a decisive role in promoting the development of architectural decoration engineering.
key word : construction engineering; Decoration works; technical management
(Architectural Decoration Thesis) Model: Discussion on Architectural Decoration Engineering Design and Technical Management
introduction ：
The so-called building decoration construction technology management means that during the construction process, the construction enterprise strictly abides by the relevant national and local technical standards, construction and acceptance specifications, and carries out the technical management work in a scientific and orderly manner, so as to create a good construction technology management atmosphere and ensure that the project acceptance meets the relevant national and local acceptance standards, And improve the project quality while ensuring the construction safety and meeting the construction schedule.
1. The important role of technical management of architectural decoration engineering
For the architectural decoration project, the construction technology determines the quality of the overall architectural decoration project. As people have higher and higher requirements for architectural decoration engineering, the relevant renovation of decoration engineering technology is also accelerating. The improvement and reform of technology provide a better technical guarantee for the architectural decoration project, so that the overall project progress, project quality and engineering direction have been developed, which can fully meet people's needs for architectural decoration.
On the other hand, the constantly updated and developed technology also makes it more and more difficult for people to manage technology. A little carelessness can easily make related work not better carried out or even cause serious consequences. On the one hand, the management of architectural decoration engineering technology can better allocate the relevant technologies, so that they can play a role in the corresponding places and promote the better progress of architectural decoration engineering.
On the other hand, the management of technology is the rational use of resources, which can ensure that technology is in the best state and there is no waste of resources. For architectural decoration engineering, technology is the fundamental soul of engineering development, and the management of technology is the protection of the soul. With the management of technology, the development of architectural decoration engineering can be more guaranteed, so that the decoration engineering can have a better driving force in the use and development.
2 Technical management of building decoration engineering
2.1 Technical management of exterior wall decoration construction
In the modern construction technology of architectural decoration, the materials used for the decoration of exterior walls are generally exterior wall bricks or coatings. The exterior wall brick decoration mainly uses the bonding effect of cement mortar to attach the exterior wall brick to the exterior wall of the main building, so as to achieve the purpose of protection and beauty.
In the process of decoration of exterior wall bricks, it is necessary to ensure that the quality of bricks used meets the building requirements; Secondly, in the process of decoration, it is necessary to ensure the flatness of the overall decoration to avoid the occurrence of material adsorption hollowness. During the pasting of exterior wall materials, attention must be paid to leaving holes at the installation position of windows to avoid material loss and subsequent secondary construction.
When processing around the window frame of the exterior wall, only the mortar can be applied. After the mortar is applied, the bricks of the exterior wall can be pasted. The installation of exterior wall windows can be carried out only after the mortar materials of its corners are cleaned. When decorating the exterior wall, the work must be carried out according to the design of the construction organization or the relevant construction drawings. The colors and types of materials used must be strictly controlled to avoid disputes caused by errors.
With the shortage of urban land, the number of high-rise buildings is increasing. When decoration construction of high-rise buildings is carried out, attention should be paid to the safety of high-altitude workers, and strict regulations should be made on relevant safety construction. Units that fail to carry out construction in accordance with construction safety standards shall be strictly punished or even disqualified from construction.
2.2 Technical management of interior decoration construction
Analyzed from the perspective of interior decoration engineering, this subject is a comprehensive subject, which is bound to incorporate more and more subject knowledge in the future development process. However, no matter how advanced technology and knowledge are, there is an invariable principle in the application of interior decoration work, which is the basic principle to ensure the construction quality. In short, the reform and improvement of decoration engineering construction technology are all centered on ensuring quality.
The construction of the interior decoration project focuses on the decoration layer of the finished surface of the building. During the decoration construction, the operation of the relevant personnel must be carried out with the main body of the structure as the carrier. In the actual construction process, attention must be paid to the quality supervision of the application of construction technology. It is necessary to distinguish the primary and secondary, grasp the key points, improve the quality optimization system and quality supervision system, and then ensure the construction quality of the interior decoration project.
The construction of the interior decoration works of the building focuses on the surface construction of the wall, ceiling, and ground. It is necessary to focus on the planning of the floor or floor tile paving, wall gypsum board, latex paint, wallpaper or ceramic tile decoration, and ceiling gypsum board ceiling. In the actual operation process, the key points of construction technology management of the above links must be determined according to the specific construction needs of the project.
For example, if you want to lay floor tiles on the ground, you must first do a good job of leveling. For the parts that need to set drainage outlets, such as kitchens, bathrooms, production workshops, etc., you should set the drainage slope according to the specific design requirements, then use the method of brushing cement slurry to finish the texturing treatment for the ground part, and finally set cross lines in both horizontal and vertical directions on the ground part, Avoid the problem of incorrect joint of floor tile.
During the construction of floor tile laying, special attention shall be paid to the drainage slope and the seam width of floor tile laying. Generally speaking, the joint width of floor tile laying shall not exceed 2mm, and there shall be no uneven or staggered joints. For projects with mosaic requirements, attention should be paid to the direction of floor tiles at any time during the laying process to ensure that they are consistent with the overall design.
During the laying of floor tiles at key locations, it is necessary to ensure accurate nesting, and the floor tile handover at the bottom of the cabinet and other parts must also be tight, and the gap must be even. Check the floor tiles after they are laid. If there is no flatness error, hollowing, color difference, etc., they should be covered with thick cardboard and protected. They can be used only after reaching the curing time.
During the construction of indoor gypsum board ceiling decoration, it should be noted that 3 to 6 mm construction gap should be reserved in advance between gypsum boards, and the butt joint between the groove and groove must be maintained. The topsoil in the joint must be removed, and then a layer of 107 glue solution with a concentration of 50% must be brushed. Kraft paper, mesh tape, paper tape or dacron cloth must be pasted at the gap to avoid drying cracks during use.
2.3 Select construction materials for building decoration works
The correct application of construction materials and equipment for building decoration works is also one of the most effective measures to improve construction technology management. With the continuous growth of people's economy, people have higher and higher requirements for the living environment. Therefore, attention should be paid to the use of green environmental protection materials in the construction of building decoration projects, which can avoid environmental pollution and is also an important measure to promote the sustainable development of China's economy.
For this reason, constructors should first choose the decoration materials that have less pollution to the environment and themselves, such as materials with moisture-proof, anti-corrosion, high ignition point, fade resistance and tasteless characteristics, which have good effects on resource conservation, waste reduction and pollution reduction. In addition, some waste materials can also be recycled, such as rubber, wall stickers, waste water pipes and glass. Designers can elaborately make them into a small decoration or small ornaments.
2.4 Scientific site selection and layout in the process of building decoration
Scientific and reasonable layout has a great impact on the effective use of the space of architectural decorations, thus affecting the utilization efficiency of architectural decorations. In large buildings, it is still necessary to strengthen the effective use of indoor space, so as to improve the utilization efficiency of buildings. For example, in the process of building decoration site selection, try to conduct concealed line operation on some parts that will not affect the use safety, so that the utilization rate of indoor space can be improved.
In addition, in the process of architectural decoration layout design, we should also strengthen the design of various decorative items, maximize the use of the surrounding environment, and pay attention to the integration of decorative items and the surrounding ecological environment. Therefore, we should strengthen the architectural decoration layout. For example, in the process of interior decoration design, we should make reasonable use of wind energy, It lays a solid foundation for the improvement of indoor air environment quality.
In the design process, we should effectively investigate the surrounding environment, use various advanced surveying and mapping technologies to conduct surveying and mapping management, and ultimately continuously improve the efficiency of building decoration.
Conclusion:
Building decoration industry is a complex system engineering, which combines many industries and disciplines. How to do a good job in construction management is a complex technical work. These all need the continuous exploration, discovery and summary of construction personnel, management personnel and enterprises. The development of construction enterprises cannot be separated from construction quality, and the control of construction quality cannot be separated from construction management. In the fierce market competition, quality is the guarantee for the survival of enterprises,
To do a good job in the management of all links in the construction process, we need to make efforts in many ways to ensure the construction quality, reduce costs, and ensure steady development on a standardized road to seek development and progress.
reference:
[1] Li Bo. Discussion on Strategies for Strengthening Construction Technology Management of Building Decoration Engineering [J]. Building Materials and Decoration. 223 (32)
[2] Luan Liang. Analysis on Construction Technology Management of Building Decoration Engineering [J]. Science and Technology Innovation and Application. 2017 (12)
[3] Li Lianjie, Liu Fang. Discussion on Construction Technology Management of Building Decoration Engineering [J]. Building Materials and Decoration. 2017 (35)
Address: http://www.668lw.com/2919.html
The source network of this site's model papers, if the content is untrue or infringes on your legitimate rights and interests, please contact us in time to delete it! Original link: » (Architectural Decoration Thesis) Model: Discussion on Architectural Decoration Engineering Design and Technical Management
