Contact information of Nujiang wood plastic plank road manufacturer

Source: Linyi Jinglin Plastic Technology Co., Ltd Time: 2024-07-02 12:23:06 [Report]

Contact information of Nujiang wood plastic plank road manufacturer
Plastic wood material not only has all the characteristics of plastic and solid wood, but also combines the advantages of plastic wood. It can be sawed, drilled, nailed, planed, and bonded like solid wood. Moreover, plastic wood flooring has better physical properties than log, better dimensional than solid wood, and will not produce cracks, warpage, wood knots, twills. Add colorants The covered film or composite surface can be made into various colorful products, so timing is not required.

Wood plastic plank road
It can complement the primitive environment, and is very suitable for the living space of old-fashioned style, such as the lounge or study with old-fashioned wood furniture and rich local flavor. Beautiful and simple limestone floor can be integrated with solid wood cabinet, oak or pine bookshelf and tables and chairs made of similar materials. Even walking barefoot on the limestone floor feels good and safe. The cold and silky feeling confirms its firmness. Limestone is softer than marble, which means that compared with other stone floors, limestone is not suitable for rooms with high use frequency, such as kitchens. Corrosive or acid stains in kitchens will pollute limestone, and sometimes even seriously damage its surface.
Plastic wood floor has been decorated by modern outdoor gardens, parks, residential areas and villas. Due to the obvious climate difference between Northeast China and South China, the temperature in Northeast China will drop to minus 20-30 degrees Celsius in winter. It doesn't matter what materials are used for outdoor floors at such low temperatures to explain and not affect. Plastic wood outdoor floor is a new type of composite floor in today's society. Its main materials are polychloride, plastic wood powder and wood fiber powder, which are formed at high temperature.

External thermal insulation of exterior wall is an energy-saving technology of exterior wall. The external thermal insulation system is located on the external surface of the building and directly faces the atmospheric environment. It needs to withstand the effects of various outdoor adverse factors and meet the thermal insulation requirements of the external wall. Its reliability, completeness and durability are particularly important. External wall thermal insulation technology is mainly used in high-rise buildings, and several matters need special attention. The system and the base wall should be reliably fixed. The high-rise building should bear large wind loads, and the wall part will produce a large negative wind pressure, that is, suction. There should be reliable bonding between the insulation layer and the base layer (inorganic material), especially if the insulation board (organic material) is used as the external wall insulation material, this link must be paid attention to.

In addition, because it contains fiber and is fully mixed with plastic, it has the same physical and mechanical properties as hardwood, such as compression resistance and bending resistance, and its properties are significantly better than ordinary wood materials. The surface hardness is high, generally 2-5 times that of wood. Wood plastic floor is a new type of environment-friendly wood plastic composite product. In the process of production and high-density fiberboard, the wood phenol produced is added with recycled plastic to make wood plastic composite through granulation equipment, and then extruded to make wood plastic floor.
　　

For example, polyurethane, silicone rubber waterproof coating, etc., its thickness should not be less than 2.5mm. Toilet and bathroom. Toilet and bath rooms are generally small in area, with many internal and external corners, and there are many pipes passing through the floor. It is difficult to construct coiled materials and sheets, so it is better to use waterproof coating. The coating can form an overall seamless film, which is not affected by the concave and convex shape of the base surface, such as JS composite waterproof coating, polybutadiene latex asphalt coating, polyurethane waterproof coating, etc. For the pipeline passing through the floor, it can be treated with sealing green or water swelling rubber strip. Common causes and treatment measures of water leakage 2.1 Conditions and measures of water leakage in the basement Water leakage in the basement generally occurs in the form of local water leakage. The basement has different geology, functions, design and construction, and its water leakage parts and forms are diverse.

Label: wood plastic plank road, plastic wood floor, co extrusion floor, PE wood plastic floor