Inorganic aluminum salt waterproof mortar waterproof agent, anti permeability, anti freezing and thawing waterproof plain mortar
Product introduction:
Inorganic aluminum salt waterproof agent roof and wall waterproof cement mortar additive is a mortar waterproof additive, which has the advantages of waterproof, water reduction, crack resistance, tensile resistance, bending resistance, early strength, impermeability, leakage prevention, moisture resistance, etc. It is used for the rigid waterproof of the surface layer of the building structure to form a solid and dense hydrophobic material, fill and block the concrete The capillary pores and water channels formed during the hardening process of mortar are waterproof and moisture repellent, which endow concrete structures and cement products with waterproof performance.
Scope of application:
It is used for roof, basement, tunnel, mine, civil air defense engineering, underground sidewalk, underground shopping mall, underground parking lot, swimming pool, water tower, water supply and drainage pool, pump station and other concrete projects with waterproof and impermeable requirements for industrial and civil buildings.
Build water pools, swimming pools, water towers, storage tanks, large containers, granaries, and storage warehouses in caves.
Construction works: the ground, interior and exterior walls, toilets and other parts are waterproof.
Technical performance:
Good waterproof performance, the measured impermeability grade ≥ P10, which does not reduce the concrete strength, and has a long waterproof life.
The construction is simple and easy to operate, which can save a lot of materials, labor costs and maintenance costs.
Heat resistance (120 ℃), cold resistance and cement life are the same.
Construction:
1. Dosage:
① For concrete pouring works, the amount of waterproof agent is Cx6-8%.
② For cement mortar plastering works, the amount of waterproof agent is Cx6-8% of the cement amount.
2. Usage: mechanical mixing of concrete and mortar: first determine the amount of waterproof agent (the waterproof agent shall not be directly added to the mixer before being diluted), then add the waterproof agent into the mixer in proportion, supplement the insufficient water with tap water, and mix for 2-3 minutes to make the concrete (mortar) uniform and workable.
3. Manual mixing of cement mortar: first mix the waterproof agent directly, and the construction base must be firm, flat and clean. The thickness of mortar plastering is 20mm in two operations.
4. The waterproof agent is suitable for ordinary Portland cement and Portland cement, and the mark is not less than 32.5Mpa