Acid and alkali resistant anticorrosive coating for the sewage pool of the desulfurization tower, and corrosion of the desulfurization tower of the power plant: during the operation of the desulfurization tower of the power plant, the inner wall of the desulfurization tower will be corroded by corrosive media such as desulfurization liquid and flue gas, and will also be worn by particles, resulting in gradual damage to the inner wall of the desulfurization tower. Solution: adopt RLHY-9035 High temperature wear-resistant acid and alkali resistant anti-corrosion coating shall be applied for anti-corrosion treatment. The coating has good anti-corrosion performance, can effectively resist the corrosion of corrosive media, and also has wear resistance, which can reduce the abrasion of tower wall caused by particulate matter.
Acid and alkali resistant anti-corrosion coating for desulfurization tower sewage pool, RLHY-9035 High temperature abrasion resistant acid and alkali resistant anti-corrosion coating has the following characteristics: one Excellent acid and alkali resistance: it can be stable for a long time in corrosive media such as strong acid and alkali, and effectively resist chemical attack. two Good adhesion: closely combined with the substrate of the sewage tank, not easy to fall off, to ensure the integrity of the coating. three Temperature resistance: it can adapt to the temperature change in the desulfurization tower and maintain stable performance under certain high temperature environment. four Wear resistance: It can withstand the friction of solid particles in sewage and reduce wear and damage. five Impermeability: prevent corrosive media from penetrating into the substrate, providing reliable protection. six Water resistance: the performance will not be affected in case of long-term contact with water. seven Aging resistance: It has good aging resistance, and can maintain the protective effect after long-term use. eight Construction convenience: It is easy to construct, and various painting methods can be used. nine Environmental protection: It meets the environmental protection requirements and has little impact on the environment and human health.
RLHY-9035 Implementation process of high-temperature wear-resistant acid and alkali resistant anti-corrosion coating: one Surface treatment shall be carried out on the inner wall of the desulfurization tower to remove dirt, grease, rust and other pollutants and ensure that the surface is clean and dry. two According to the instructions for coating RLHY-9035 High temperature wear-resistant acid and alkali resistant anti-corrosion coating shall be evenly applied on the inner wall of desulfurization tower to ensure uniform coating thickness. three During the drying process of the coating, pay attention to the ambient temperature and humidity to avoid damage to the coating. four The quality of the coating shall be checked to ensure that the coating is free from defects such as hollowing, bubbles, cracks, etc.
Acid and alkali resistant anticorrosive coating for wastewater pool of desulfurization tower, application effect: RLHY-9035 The high-temperature wear-resistant acid and alkali resistant anti-corrosion coating effectively solves the corrosion and wear problems of the desulfurization tower in the power plant, prolongs the service life of the desulfurization tower, improves the desulfurization efficiency, and reduces the maintenance cost and downtime.
Disclaimer: Hangzhou Shangyi Information Technology Co., Ltd. does not declare or guarantee the correctness or reliability of all information published on CNBM Online; You hereby accept and acknowledge that you shall bear the risk arising from reliance on any information. Hangzhou Shangyi Information Technology Co., Ltd. has the right but not the obligation to improve or correct errors or omissions in any part of the information published.
