Introduction to FRP water tank :
SMC combined FRP water tank is a new type of water tank currently used. It is assembled by integral SMC water tank plate. It is characterized by the use of food grade resin, so the water quality is good and clean; It has the characteristics of high strength, light weight, corrosion resistance, beautiful appearance, long service life, convenient maintenance and management, etc.
Produced by our company FRP water tank It is recommended by the State Building Materials Industry Bureau and the Ministry of Construction, and fully meets the technical performance requirements of the State Building Materials Industry Bureau standard JC658.1-1997. The water tank has been tested by relevant national departments, and the water tank meets the requirements of GB/T17219-98 Specification for Safety Assessment of Drinking Water Transmission and Distribution Equipment and Protective Materials, and the quality of the glass fiber reinforced plastic tank meets the national Standard for Drinking Water (GB5749-85). FRP water tanks are widely used in industrial and mining, enterprises and institutions, residential buildings, hotels, restaurants and other buildings as drinking water, reclaimed water treatment, fire water and other water storage facilities.
FRP water tank It is assembled by SMC molding plate, sealing material, metal structure and piping system on site. Bring convenience to design and construction. The general water tank is designed according to the standard, and the special water tank needs to be designed. The water tank of 0.125-1500 cubic meters can be assembled according to user needs. If the original water tank needs to be replaced, the house does not need to be rebuilt, and the adaptability is strong. The developed finalized product sealing belt is water resistant, elastic, small in shape and tight in sealing. The water tank has high overall strength, no leakage, no deformation, and is convenient for maintenance and overhaul.
Produced by our company FRP water tank The board is made of glass fiber reinforced material and molded by high temperature and high pressure process. The plate size is respectively 1000 × 1000, 1000 × 500 and 500 × 500 standard plates, and the plate thickness is 5mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm, 20mm and 22mm.
1. Application scope of FRP water tank
a. Domestic and fire water for ordinary residential buildings, commercial and residential buildings, office buildings, residential quarters, government agencies, hotels, schools, etc.
b. Production and domestic water for industrial and mining enterprises.
c. Various types of circulating water, cooling water, hot water supply system water.
d. Acid and alkali reserves.
2. Features of FRP water tank
a. Excellent selection of materials: unsaturated resin and glass fiber are domestic brands, with product quality.
b. Special structure: special sealing strip and full bolt connection structure are used for convenient installation, without water leakage and untight sealing. In addition, the special tie rod structure inside makes the mechanical performance more reasonable.
c. Fast construction: standard molded plates can be assembled at will without lifting equipment. The shape should meet the user's requirements, and the volume can meet all design requirements. There is no special requirement on the installation site, and the box is beautiful
d. Light weight: the ratio of volume weight of concrete water tank to its own weight is 1:1, and that of SMC molded water tank is 1:0.1-0.2, so its own weight is not required to be considered in the design process, so it is called portable water tank
e. Sanitation and environmental protection: do not breed algae and red worms, avoid secondary water supply pollution, and maintain clean water quality
f. Reduce cleaning: clean once a year, greatly reducing cleaning costs
3. Selection guide of glass steel water tank
a. The FRP water tank adopts the combination of standard plates, which are 1000 × 1000, 1000 × 500 and 500 × 500.
b. The length, width and height of the water tank shall be 500.
c. Water tank foundation drawing (can be provided by us):
4. Technical requirements for water tank foundation construction
a、 The levelness tolerance of the overall foundation plane composed of concrete bracing shall not be greater than 5mm; The difference of the diagonal length of the plane shall not be greater than 20mm.
b、 The horizontal distance from the end face of the foundation to the wall (four sides) shall not be less than 600mm.
5. Ordering Instructions for FRP Water Tank
a. Users can choose the size or design by themselves;
b. Please prepare the foundation according to the foundation drawing before installation;
c. When ordering, users should specify the inlet and outlet pipes, pipe diameters and elevation directions of the water tank according to the design requirements;
d. If users have special requirements, please notify in advance.