Daxing Xingfeng Mengtai concrete sand control agent
Product Introduction
The ground sanding treatment agent is specially developed for the sanding phenomenon of existing concrete floors due to poor construction and non abrasion resistance. The concrete surface layer is sprayed directly to improve the sanding and wear resistance. It is convenient to use and does not affect the use of the original floor. It is a kind of odorless, water-based environmental protection material, which can produce chemical reaction by infiltrating with concrete to form a dense three-dimensional network crystal; Significantly improve the strength of concrete, with hardening and abrasion resistance effects. Cement floor sanding repair agent
function
one Improve wear resistance ASTMD-779 After treatment sixty Minute wear resistance increased 25--30% ， seven Increase after days 116% 。
two Increase strength and hardness twenty-eight The compressive strength of the treated sample after days is higher than that of the untreated sample two Above. ASTMC-805 Increased impact strength of Schmidt hammer 23% 。
three dustproof Treated ten After hours, the concrete sample will not produce dust.
four Enhanced chemical resistance After treatment, the chemical resistance and corrosion resistance of concrete are greatly improved!
five Increase friction coefficient The friction coefficient of treated ground is determined by forty-five increase to seventy-two
Scope of application
Industrial floor, workshop floor, logistics storage, food and medicine production base, parking lot, expressway, bridge tunnel, wharf, sports center, etc Terrazzo and carborundum wear-resistant floor as the base course. Concrete sand control agent
Applicable floor treatment
All kinds of emery wear-resistant floors are treated for dust prevention and dust prevention, and all new and old, rough and dusty concrete floors are hardened, Dust prevention treatment ； Dust prevention treatment of old terrazzo floor.
matters needing attention
one Before construction, workers should take appropriate protection measures to avoid skin contact between products. If the product is accidentally splashed into the eyes, it should be washed with plenty of water. Store in a place that is not suitable for children. Do not swallow it.
two Maintain curing agent in construction area
