product name |
Transparent PP plastic quick drying adhesive, environment-friendly PP plastic instant adhesive, PP adhesive PP plastic quick drying adhesive |
Region oriented |
whole country |
Hot melt adhesive type |
Room temperature curing type |
Type of bonding material |
Bonding of PP, PE/POM and PE folding box |
Viscosity |
800（mpa.s） |
Transparent PP plastic quick drying adhesive force makes environment-friendly PP plastic instant adhesive
[Product Features]
● JL-406AB agent transparent PP plastic quick drying adhesive conforms to international environmental protection standards and passes the European Union ROHS standard and SGS test.
● JL-406AB agent transparent PP plastic quick drying adhesive is a special instant adhesive developed and produced for some special materials. It is two-component and easy to construct. It is very suitable for continuous production line operation. It has high strength, good flexibility, moisture resistance and other properties.
[Application Scope]
Juli JL-406AB environment-friendly PP plastic instant adhesive A is a PP treatment agent. Agent B is PP adhesive, PP quick drying glue This product is prepared and used by AB, and PP quick drying glue is applicable to the bonding of PP, PE/POM and other materials and the bonding of PE folding boxes. PP sticks to metal, PP sticks to plastic, PP sticks to stainless steel, PP sticks to aluminum alloy, and PP sticks to iron all have very good bonding effects. It is one of the good adhesives for sticking PP quick drying adhesive.
[Performance and parameters]
Viscosity (mpa. s) 800 Temperature range (℃) - 50 ～ ＋ 120
Tensile strength (kg/cm2) 155 Shear strength (Mpa) 24
Curing speed (s) 5-8 Filling gap (mm) 0.02 ～ 0.05
[Usage]
● Use dry cotton cloth or sandpaper to remove the dust, oil stain, rust, etc. on the bonding surface, and then wipe with treatment agent or cleaning agent to clean the bonding surface.
● Screw off the front cover to use Juli brand transparent PP plastic quick drying glue. If there is glue at the bottle mouth, wipe the glue with a cotton cloth first, and then put a needle or PE dropper on it for use, so as to control the glue flow and the bonding effect.
● Use JL-406AB agent environment-friendly PP plastic instant adhesive. First, use agent A is PP plastic surface treatment agent to treat the PP surface, that is, apply agent A and PP treatment agent on the two bonding surfaces. When agent A is PP treatment agent dry, immediately drop a small drop of agent B is PP glue on the bonded surface, immediately bond and press firmly to make the two bonding surfaces completely coincide, and maintain until hardening, The hardening time varies from 10-15 seconds. PP glue can reach practical strength in about 30 minutes, and high strength can be obtained after 24 hours.
● Clean the bottle mouth after using environmental protection PP plastic instant glue, and tighten the lid.
● Please store the glue in a cool and dry place after use.
Dongguan Juli Adhesive Products Co., Ltd. - your intimate purchasing consultant.
National free sample request, first use and then buy more assured! Hotline: online
View all introductions
