Henan unloading arm bottom unloading crane tube, unloading crane tube
As the name suggests, the crane tube is a kind of flexible tube, which is mostly used in petroleum, chemical and other industries. The crane tube is used for the top or bottom loading and unloading of various liquids and liquefied gases in the open or closed state of automobiles or trains, and is suitable for carrying liquefied gases, petrochemical products, acids, alkalis and other chemical products.
![](http://jmage0.huangye88.net/live/2022/05/16/0e9b0497925160e9b947415b92a2cb15.jpg@750w_750h_90Q)
Implementation of safety measures for unloading crane pipe
1. The operator shall guide the vehicle to drive into the idle parking space slowly and correctly, and stop stably, and turn off the power supply of the whole vehicle.
2. Check whether the static grounding device of the vehicle is in good condition, and correctly ground the ground wire on site.
3. Safety measures such as on-site fire extinguishers and fire water are in place.
4. Unloading personnel and drivers shall eliminate static electricity as required and wear labor protection articles.
5. No activities or operations with fire or static electricity are allowed within the safe distance of the site.
![](http://jmage0.huangye88.net/live/2022/05/16/08ca359c7a9ed0265e67d842685f1145.jpg@750w_750h_90Q)
During the transportation of liquid ammonia, we should pay attention to safety. The liquid ammonia crane pipe will be used in the transportation of liquid ammonia, and the setting requirements of the liquid ammonia crane pipe should also meet the transportation conditions of ammonia. For its safe use, it should be used according to the use requirements. The following describes the main functions of the liquid ammonia crane tube:
1. High safety: because the sealing device of the liquid ammonia crane tube is very special, it can achieve good sealing during loading and unloading, without leakage, so that the fluid loading and unloading operation of the car will be much safer.
2. Good stability: the liquid ammonia crane tube can transport many media, even if it is concentrated sulfuric acid, there is no pressure.
3. The liquid ammonia crane tube is easy to operate: it can improve the operation efficiency. As we all know, the loading and unloading of traditional petrochemical media is very complicated. Although the hose is cheap, it needs manual operation, and it is easy to have problems during the docking process. However, loading and unloading with crane tube is a one-time operation, and the operation is simple.
4. High sealing: no leakage will occur during the docking process, which can overcome many disadvantages of traditional hoses. The important point is that this way does not have some unsafe and inflexible problems in the traditional loading and unloading methods.