Base treatment
1. The base surface shall be stable and flat without peeling, hollowing, pulverization, dust, oil stain, etc.
2. If the base level is too high dry Or water absorption is too fast. Before construction, the base surface shall be watered until there is no exposed water.
3. The newly plastered wall should be cured for about 14 days before being embedded putty , and do not use cement Clean paste calendering.
Construction description
1. When using, the ratio of powder to water is about 2:1. Pour proper amount of water into container , and then join
The powder shall be stirred into a uniform slurry without particles with an electric mixer, and it can be stirred again after 3-5 minutes.
2. Generally, it shall be scraped 2-3 times in batches, and the thickness of each time shall be about 0.5-1 mm
The second batch scraping, * * and polishing within 1-2 days after the completion of one pass, do not over polish so as not to affect the strength.
3. If the light effect is needed, it can be scraped twice continuously, and polished repeatedly after the surface layer is scraped 70% or 80% dry until it reaches
Satisfactory brightness and hardness. If matt effect or polishing surface is required, then apply other coating After scraping
When the surface layer is 30% or 40% dry, it can be pressed flat. The matt effect is easy to polish, but it is not as hard as the bright light.
4. The surface coating construction shall be carried out about 5-7 days after the putty layer is completed. If the construction needs to be carried out in advance, the alkali resistant sealing bottom shall be used
Paint backing treatment.
matters needing attention
1. The suitable construction temperature is 5-40 ℃. Before construction, if wall If it is too dry or absorbs water too quickly, it should be wetted in advance
The wall surface shall be subject to no clear water, which can avoid small bubbles caused by abnormal wall bottom materials.
2. If the wall bottom material or slurry is too thin, causing small bubbles on some walls, it takes 10 minutes to mix the slurry again
Times. If there are still small bubbles after * * times of putty, the small bubbles must be removed before the second time of putty, which will not affect the construction quality.
3. When the weather is hot and dry, pay attention to watering and curing for 2-3 days after the putty is completed for 24 hours, which can prevent the powdering phenomenon caused by the lack of time for the putty to keep fit, and can also speed up the regression of alkalinity.
4. This product cannot be directly scratched on board The wooden surface shall be scraped after interface treatment. Or use the products produced by our factory board **Putty scraping.
5. This product is alkaline and should be avoided from contact with skin for a long time. Wear a dust mask and pay attention to eye protection when polishing. In case of slight skin irritation caused by initial contact of individual construction workers, use Dermatitis Flat or Aloe Vera gel to wipe.

[Reference dosage]: The dosage is about 1.2-1.5kg/m2 when the base surface is flat.
[Shelf life]: Stored in a cool and dry place, it can be stored for three years if not opened.
[Package specification]: 30kg/bag

Guilin Qiangbao Paint Co., Ltd. was founded in 2004. The company is located in the north development zone of Guilin City, where the landscape is the best in the world. It is 2 kilometers away from the national highway Guihuang Highway, 3 kilometers away from the railway freight station, and only 5 kilometers away from the highway entrance. The transportation is very convenient. Main business of the company Home Furnishing Environmental friendly water-based putty products are indispensable for decoration. from public There are a complete range of high-end products. According to the product grade, it can be divided into dozens of varieties, such as economic putty, high-quality universal putty, high-quality luxury putty, gold putty king, thousand hammer putty powder, negative ion texture putty powder, etc. With the improvement of people's living standards and the rapid development of the real estate industry, the housing decoration industry has entered a golden age. Guilin Qiangbao Paint Co., Ltd., relying on the advantages of high-quality and inexpensive rich mine raw material resources and advanced production management technology in Guilin, attaches great importance to product quality, constantly strengthens brand advantages, and its business development has made rapid progress, In recent years, the performance of enterprises has been growing rapidly by 60% every year. In less than five years, it has developed from a small workshop of less than 100 square meters to a modern standard putty powder production enterprise with a building area of more than 4000 square meters and a usable area of more than 13000 square meters. Now, the comprehensive strength of Guilin Qiangbao Paint Co., Ltd. is firmly in the top position of Guangxi putty powder industry.
   
    Guilin Qiangbao is a professional production base of water-based putty powder, with a complete range of products, including waterproof putty powder for interior wall, waterproof putty powder for exterior wall, putty powder for ceramic tile renovation, mosaic interface putty powder, anti crack putty powder for exterior wall, anti yellowing and anti alkali putty powder for old wall, fluorocarbon paint exterior wall * * putty (thick and thin), board putty powder, elastic exterior wall putty powder, anti crack mortar, etc. Relying on the high-quality Shuangfei powder resources in Guilin, Guangxi, the putty powder produced has high whiteness, resistance to water washing, good viscosity, and no powder falling off. After polishing, it is as smooth as jade, without scratches, and latex paint can show the effect of latex paint. As the saying goes, seven parts of putty and three parts of paint, good paint needs good putty. Guilin Wall Treasure strives for survival by quality, development by brand, and efficiency by scale!