Price of new type square wood multi blade saw, multi blade saw and multi blade saw Solid wood flooring Material processing
How to select square wood multi blade saw
First, we need to consider the large thickness, width and length of the square materials we need to process. We need to select the appropriate machine according to the thickness and length of our frequent cutting. Second, we need to consider the thickness of the round wood, because thickness and length are important parameters of the machine,
Because the thicker the square is, the longer the required length is, because this is determined by the characteristics of the machine, because the thicker the square is, the larger the saw blade needs to be installed, the larger the diameter of the saw blade is, the wider the distance between the feed pressing wheel and the discharge pressing wheel of the square multi blade saw is, and on the contrary, the smaller the distance is, so when selecting the square multi blade saw, you must know the width and thickness of the saw, And small length to select the correct machine.
Secondly, according to the properties of the square materials, whether the square materials you sawed belong to cork or hardwood,
Because wood properties directly affect the power of sawing, most people know that softwood is easy to saw and hard wood is difficult to saw. The properties of wood determine what the machine needs electric machinery Power size. When the diameter of cork is the same as that of sawing, the machine with lower power can be selected, and the machine with higher power must be selected to ensure the power output.
The service life of the multi blade saw will be shortened if daily maintenance is not paid attention to during daily use. Therefore, it is necessary to carry out regular maintenance for multi blade saws.
So how should we maintain and maintain the multi blade saw?
1. The chain is easy to wear, so it is necessary to regularly adjust and check the feeding chain and the feeding motor chain, clean the sundries on the chain, and properly apply wheel lubricating oil Etc.
2. Regularly check whether the length and tightness of the belt of the main motor are appropriate. If the belt is too tight or loose, some problems will occur.
3. The box part and the main shaft part should be refueled regularly to check whether the oil pipe is properly aligned with the port. If the machine is running short of oil, it is easy to wear the machine and shorten the service life of the multi blade saw
4. Cushion sleeve, saw blade and navigation blade need to be cleaned with diesel regularly (usually once every 3-5 days). After cleaning, wipe the surface with clean cloth. During installation, there should be no sundries on the cushion, saw blade and navigation blade, otherwise the use of equipment will be affected, and the sawing accuracy will be affected.
5. When replacing the saw blade for the spindle core every day, the water outlet shall be flushed once with water, or the air gun shall be used to aim at the water outlet to blow air to drain the dirt and ensure the water outlet is unblocked.
Multi functional new type square wood multi blade saw, multi blade saw, multi blade saw, real price Wood floor Material processing
model | MGJF12*25 | MGJF14*25 | MGJF16*25 |
Feed length (cm) | 50-400 | 50-400 | 50-400 |
Feed thickness (cm) | 4-12 | 6-14 | 8-16 |
Feed width (cm) | Infinite width | Infinite width | Infinite width |
Saw blade motor power (kw) | 22*2 | 25*2 | 27*2 |
Feeding motor power (kw) | one point one | one point one | one point one |
Spindle diameter (mm) | fifty | fifty | fifty |
Cooling mode of saw blade | Axial water spraying | Axial water spraying | Axial water spraying |
Cooling water pressure (mpa) | 0.3-0.6 | 0.3-0.6 | 0.3-0.6 |
Feeding speed (m/min) | 0-8 (frequency control) | 0-8 (frequency control) | 0-8 (frequency control) |
Saw blade specification (mm) | 230*(2.0-2.6)*50*3PT 3T | 255*(2.2-2.8)*50*36P 3T | 280*(2.2-2.8)*50*36P 3T |
Table length (cm) | Front 60 and rear 40 | Front 60 and rear 40 | Front 60 and rear 40 |
Overall dimension (cm) | 230*135*140 | 240*135*140 | 240*135*140 |
Operating Weight (kg) | one thousand and eight hundred | one thousand and nine hundred | two thousand |
remarks | The above equipment can be customized according to customer requirements. | |
model | MGJF8*30 | MGJF16*30 | MGJF18*30 |
Feed length (cm) | 50-400 | 60-400 | 60-400 |
Feed thickness (cm) | 3-8 | 9-16 | 9-18 |
Feed width (cm) | Infinite width | Infinite width | Infinite width |
Saw blade motor power (kw) | 18.5*2 | 30*2 | 30*2 |
Feeding motor power (kw) | one point one | one point one | one point one |
Spindle diameter (mm) | sixty | sixty | sixty |
Cooling mode of saw blade | Axial water spraying | Axial water spraying | Axial water spraying |
Cooling water pressure (mpa) | 0.3-0.6 | 0.3-0.6 | 0.3-0.6 |
Feeding speed (m/min) | 0-10 (variable frequency speed regulation) | 0-6 (variable frequency speed regulation) | 0-6 (variable frequency speed regulation) |
Saw blade specification (mm) | 180*(1.6-2.4)*60*24P 3T | 280*(2.2-2.8)*60*36P 4T | 280*(2.2-2.8)*60*36P 4T |
Table length (cm) | Front 50 and rear 30 | Front 100 and rear 40 | Front 100 and rear 40 |
Overall dimension (cm) | 220*140*150 | 240*150*140 | 300*155*155 |
Operating Weight (kg) | one thousand and eight hundred | two thousand and two hundred | two thousand and four hundred |
remarks | The above equipment can be customized according to customer requirements. |
model | MGJF20*30 | MGJF25*40 |
Feed length (cm) | 60-400 | 80-600 |
Feed thickness (cm) | 10-20 | 15-25 |
Feed width (cm) | Infinite width | Infinite width |
Saw blade motor power (kw) | 30*2 | 37*2 |
Feeding motor power (kw) | one point one | one point five |
Spindle diameter (mm) | sixty | eighty |
Cooling mode of saw blade | Axial water spraying | Axial water spraying |
Cooling water pressure (mpa) | 0.3-0.6 | 0.3-0.6 |
Feeding speed (m/min) | 0-6 (variable frequency speed regulation) | 0-5 (variable frequency speed regulation) |
Saw blade specification (mm) | 305*(2.4-3.0)*60*36P 4T | 380*(2.8-3.6)*80*40P 4T |
Table length (cm) | Front 100 and rear 40 | Front 100 and rear 40 |
Overall dimension (cm) | 300*155*155 | 550*190*170 |
Operating Weight (kg) | two thousand and six hundred | three thousand and eight hundred |
remarks | The above equipment can be customized according to customer requirements. |
Equipment performance:
The multi blade saw is mainly used to cut square materials and process them into multi blade plates. The upper and lower shafts are designed with large diameter. With small saw path and saw pin Smooth surface and high yield. It is an ideal woodworking machinery equipment for processing finger board, joinery board, packaging board, etc.
Equipment features:
1： The use of ultra-thin small size saw blade, small load, material and power saving.
2： The upper and lower transmission shafts rotate synchronously, so that the feeding is powerful and can move forward and backward freely without blocking the wood.
3： Good waterproof design makes the spindle completely waterproof and does not burn the saw blade. 4： After professional dynamic balance testing, the vibration and voice are smaller.
4： Good quality motor is adopted, with longer service life.
Remarks: Round wood multi blade saw, crawler type edging saw and multi specification edging saw can be equipped according to personal requirements.
New type square wood multi blade saw blade multi blade saw price solid wood flooring machining
