[Dismantling] The "secret" of the five generations of Daryou Wranglers

After 7 years of transformation, the "Wrangler" has derived several versions and models. What remains unchanged is the comfortable feel and classic appearance.

Before you know it, Daryou Wrangler has come to the fifth generation, which is integrated into the KBS balance system of EM945. The separated keys make the players look bright. Many players are curious about the design of the KBS system, and want to find out. Today, we will follow our disassembly to analyze the five generations of Daryou Wrangler mouse 。~

Disassembly tool

Multifunctional screwdriver, hair dryer, soft card.

Disassembly process and interpretation

Separation of upper and lower covers: Many mice are disassembled from the lower chassis, because it is easy to assemble, while our fifth generation of Wranglers are in the rear shell, mainly for structural stability, so don't disassemble them easily.

By using a soft card or screwdriver to pry the back cover along the edge of the back, the translucent is the translucent acrylic inner shell of the fifth generation of the Wrangler.

The difficulty coefficient of the first step of disassembly is relatively high. It took more than ten minutes. Please don't try it easily.

After the rear shell is removed, the fixed point of the long arm of the KBS force balance system can be seen, and a shaft is added to ensure smooth and stable pressing.

Then, we use a flat screwdriver to pry up the left and right key boards slightly under the fixed steel wire to complete the removal of the upper cover.

As shown in the figure, there are two screws at the front end of the left and right keys of the inner shell to fit with the chassis. After removal, the screws of the chassis can be removed to complete the separation of the inner shell and the lower cover.

To remove the screws at the bottom, first heat the Teflon foot sticker through the hot air of the blower. After the foot sticker glue becomes soft, remove the foot sticker, and then remove the four connecting screws with the transparent inner shell.

Then pry along the joint between the inner shell and the side to separate the inner shell and the bottom shell.

Internal disassembly and interpretation: how about? The internal panels of the mouse are arranged neatly, with a sense of fine and complex sequence. It's a bit beautiful.

The five generations of Daeryou Wranglers adopted a new white PCB. In order to facilitate the setting of functions and the stability of electronic circuits, they adopted a dual structure of two PCBs - the function board (upper) and the core circuit (lower), which are connected with each other through flat wires.

On the function circuit board, you can see the microswitch and encoder at a glance. The core microswitch with the left and right buttons is a blue dot on the blue shell

Micro motion. From the logo of micro motion, we can see that it is 50 million times of micro motion independently by Daryou. It feels very crisp.

TTC encoder is our favorite. TTC is a supplier of first-line peripheral manufacturers. The rollers of the five generations of herdsmen are TTC encoders with metal rollers, with moderate damping and clear tooth sense. After optimizing the reinforcement structure, the roller is stable without shaking. I believe you will like it.

In addition, the side key and DPI key use Warner's red dot inching.

After removing the screws on the front PCB and arranging the cables, we can directly remove the rear PCB (core circuit board) after releasing the snap.

The engine of the mouse on the core circuit board is the high-level game engine PMW333610800DPI, 8000FPS, 150IPS customized by Daryou. The real materials are guaranteed. With the processing chip of HOLTEK HT32F52352, a good horse is equipped with a good saddle.

The PMW3336 is a high-order engine with a visible light hole on the reverse side and a lens. As can be seen from the figure, its package and light hole are completely different from those of the PMW3325 and 3050. Daryou players will not suffer in performance.

The large patch type RGB lamp beads around the PCB board, and the two PCB boards are combined together with a total of 16 LEDs to form a circle, so that we can be satisfied with the uniform and transparent backlight effect.

Interpretation of the middle structure (inner shell): back to the transparent acrylic inner shell, the main function is to guide light, and evenly spread the light to all parts of the mouse to achieve RGB flow.

On the transparent inner shell, the highlight middle island module and DPI keys are fixed with snaps, and the side keys are directly embedded in the grooves. The LOGO light transmission hole is left on the back, and there is a small counterweight behind to keep the weight balance of the mouse.

Next is the focus of the five generation mouse of Daryou Wrangler, the architecture of KBS balance system and key design.

The black technology of keys - KBS balance system: KBS balance system first appeared on the high level game mouse of Daryou EM945. The significantly improved touch of keys has also been recognized by many players, and the introduction of KBS by the fifth generation of horse herders is inevitable.

In terms of appearance, the design of split keys has been made on the basis of EM915. The structure of the keys has become longer in length. The design of the long arm significantly increases the effective click area of the left and right keys of the mouse. Clicking at different positions of the keys can be triggered stably. There is almost no dead corner for pressing, and the click consistency is high.

In addition to the design of the long arm, another key point of the KBS force balance system is the spring. Although this small spring is inconspicuous, it can make the force on the mouse button become even, ensuring that you can feel comfortable force feedback when you press it in different positions, and at the same time, it can keep the mouse button in the same position when it bounces back.

Finally, Daryou has achieved integration and innovation in the five generations of horse herders. From the appearance design to the gradual disassembly and interpretation of the internal structure, we believe that we can further understand the five generations of Dalyou Wranglers, and understand the attitude and intentions behind the products.

This article is an original article. If it is reproduced, please indicate the source: [Dismantling] The "secret" of the five generations of Daryou Wranglers //diy.zol.com.cn/727/7273066.html