Quotation of Gaomei tester
Tester screening
-
All brands -
A-G -
H-N -
O-T -
U-Z
GMC-I-I METRAHIT CAL / CAL PACK
-
Product type: A multimeter -
Function description: Used to generate and simulate a variety of electrical parameters, including 10 different thermocouples and 4 Thermal Resistive Sensors -
Interface: Infrared interface -
Product characteristic 1: Voltage, resistance and frequency signal simulation Thermal resistance and thermocouple temperature signal simulation Square wave and ramp function functions and programs generate various automatic time sequences of all analog signals, and time parameters are adjustable Support external charger for long-term measurement IP54 protection grade Measurement level: 250V CAT I Optional software: METRAwin90-2 and METRAwin10 METRAHIT CAL standard configuration: rubber jacket and strap
GMC-I-I METRAHIT27I
-
Product type: A multimeter -
Function description: The insulation resistance tester is suitable for aviation service and maintenance, as well as motor maintenance and other fields -
Interface: Infrared interface -
lcd: LCD display and support backlight -
Power Supply: 3 rechargeable NiMH AA batteries -
Product characteristic 1: Voltage measurement range from 3-600V DC or 3t to 600V AC, supporting 30000 bits Continuity and diode measurement Overload protection function Measurement level: 600V CAT II IP54 protection Attached accessories: NA HIT27 charger × 1 KC4 Kelvin folder × 2 KC27 Kelvin probe × 2 HC30 hard portable box × 1 USB-Pack
GMC-I KE7100
-
Product type: Network tester -
Function description: Ethernet performance test, test wiring and pair: connectivity, open circuit, short circuit, alternating and series winding, etc. At the same time, it can test the line length and locate the distance between cable short circuit/open circuit points. -
Product characteristic 1: Built in user configurable cable library, all kinds of cables and wiring diagrams make you clear at a glance. It supports up to 32 remote ends, which can be managed by the KE7100. Ethernet power supply (PoE, PoE+and PoE++) and its power can be tested. The port lookup function (the LED on the switch flashes) can help identify the data port. With integrated audio signal tracking function, PROBE310 can be used for line finding.
GMC-I fourth generation safety tester SECUTEST BASE
-
Product type: Safety gauge tester S -
Function description: It is a reliable, comprehensive and efficient testing tool, which can meet the following requirements: Electrical and electronic safety standard DIN VDE 0701-0702 includes extension cord and PRCD test Medical appliance safety standard DIN EN 62353 Safety standard for arc welding equipment DIN EN 60974-4 In many applications, electrical equipment needs to be tested for safety regulations, and the test needs to be carried out according to the specifications formulated by the national metrology authority, enterprises and security departments. Preventive safety test shall be carried out for electrical equipment after each overhaul, and regular inspection shall be carried out during the safe operation of electrical equipment. 8 preset test programs can quickly measure electrical equipment A general adjustable test program Test procedure for individual measurement execution Suitable for trained people Extensive data management and storage concepts, automated test procedures, and single measurements up to 50000 data records Quick access to test function through double rotary switch, direct selection key and shortcut key Unique multiple measurements make it easy to record several measurement points Automatic DUT connection and protection level detection Compact, impact resistant housing with integrated rubber protection Comprehensive test report suitable for legal security Extensive setting options, international use (language, keyboard, character set, date, time) ETC report generation software ETC provides various support functions for recording completed tests Test current of protective conductor: 200Ma Standard configuration: Main power cable Test probe, 2m, non crimped 1 USB cable 1 plug-in alligator clip DAkkS calibration certificate D/GB/FR -
Interface: Two USB A and one USB B for data exchange -
lcd: High resolution, bright 4.3 inch TFT color display -
Product characteristic 1: SECUTEST series products enable electrical engineers to perform safety tests with confidence and archive the test steps in the standards they are based on. Optional: Z853R database expansion supports two-way data exchange and can generate personalized test programs.
GMC-I-I LED display electricity meter
-
Product type: LED display electric energy meter APLUS -
Function description: For power and distribution systems. A comprehensive multi-functional high-end instrument and equipment integrating monitoring and power quality analysis, covering all applications. The high quality of the measurement system is an unusual display device. Because the relevant reference conditions (pure sine wave signal) are proposed in the data measurement, some distorted data cannot be reflected. Aplus is a device with strong distortion system to realize the best measurement application -
Interface: Modbus/RTU communication interface (RS485), 115.2kBd One channel digital output S0, 12/24VDC 1 digital input 12/24VDC One way relay 250VAC/2 A or 30VDC/2A -
Product characteristic 1: Data recording (SD card) Load profile (average) Minimum/maximum of average interval Time stamped events and alarms Calendar based meter readings Disturbance record (RMS value)
GMC-I-I SIRAX BM1400
-
Product type: LED display electricity meter -
Interface: Modbus TCP (Ethernet) interface -
Product characteristic 1: Clear and clear indication of measured values on LED display Easy to operate and parameterize on site Automatic cyclic scrolling of measurement data Integrated active and reactive energy meters
GMC-I-I LCD electric energy meter SINEAX CAM
-
Product type: LCD electric energy meter -
Function description: Intelligent electric quantity analysis device for strong current parameters -
Interface: Ethernet interface, USB2.0 -
Size: 90x186x63mmmm -
Product characteristic 1: Measurement input: the nominal voltage can reach 693V (Ph Ph), the nominal current is 5A, the override is programmable, the nominal frequency is 45... 65Hz, 10... 70Hz or 10... 140Hz, and the device can have the current input of Rogowski coil System configuration: single-phase AC system, split phase, 3/4 line 3-phase system balanced/unbalanced load. Clockwise and counterclockwise
GMC-I-I SIRAX BT5700
-
Product type: LCD electric energy meter -
Function description: Used for fixed installation and measurement of voltage, current, frequency, power, energy (active/reactive/apparent), power factor, phase angle, etc. in low-voltage switchgear -
Product characteristic 1: Use a backlit LCD display to give a clear and visible two-wire indication of the measured data. Easy to operate and parameterize on site. Automatic cyclic scrolling of measurement data. Integrated active and reactive energy meters
GMC-I-I U1389
-
Product type: LCD electric energy meter -
Interface: Communication interface: LON, M-bus or L-bus can be selected -
Product characteristic 1: Pulse output S0 or 230V Adjustable pulse times and pulse width Nominal frequency 50Hz or 60Hz LCD, 7-bit main display, 8-bit auxiliary display
GMC-I-I SINEAX AM3000
-
Product type: HD color display electricity meter -
Function description: Integrated instrument for measuring and monitoring power system -
Interface: Modbus/RTU interface, Ethernet interface -
lcd: High resolution color TFT display
GMC-I-I LED display electric energy meter APLUS
-
Product type: detector -
Function description: For power and distribution systems. Comprehensive multi-functional high-end instruments and equipment integrating monitoring and power quality analysis -
Status indicator: LED -
Product characteristic 1: The direct measurement value is above 690VLL. Nominal value CAT III Response time<100ms Running clock counter of external equipment Monitoring management/limit value display Flexible I/O for easy integration
GMC-I-I SECULIFE NIBP
-
Function description: Noninvasive blood pressure, invasive blood pressure, electrocardiogram, temperature, arrhythmia, breathing, leakage diagnosis -
Interface: RS232 communication interface -
Product characteristic 1: Standard pressure of 0 to 500mm end column ± 1% deviation from actual pressure measurement Digital pressure value compensation Total pressure and BP waveform display Available modes: adults, newborns, hypertensive patients and hypotensive patients Multiple display screens and character sizes Built in programs can be used for expansion Peak pressure detection only requires simple reset function ECG output can have complete NSR waveform Simulate sine breath waveform
GMC-I-I SECULIFE ES XTRA
-
Product type: High frequency electric knife tester -
Function description: For REM/ARM/CQM test and high-frequency leakage current test, users can independently program automated test reports -
Interface: Data printing can be realized through RS232 and USB interfaces USB, RS232 and Ethernet communication interfaces -
Product characteristic 1: Industry standard high frequency current measurement and multiple pulse waveform measurement (SECULIFE ESPRIME) Ultra fast digitization capability for complex high-frequency waveform Compatible with continuous and pulse output waveforms Real time operating system with 1/4 VGA touch screen Up to 15 different measurement parameters can be displayed simultaneously The internal high-precision load can be adjusted from 1-6400 Ω to 1 Ω in steps Perfect compatibility with external loads
GMC-I-I SECULIFE IF+
-
Product type: Syringe pump tester -
Function description: It is used to measure the flow rate of the intravenous injection pump, so as to ensure the microprocessor control, accurate calculation and display of the results under normal working conditions of the pump -
Product characteristic 1: Two injection pumps can be tested at the same time Graphical interface and cursor switching operation Automatic cavity detection Two chamber options (3.5ml and 35ml) Detect invalid test sequence Battery level display (0-100%) Range: 0-999.9ml/h and 0-9999ml/h ± 1% measurement error Digital calibration - no potentiometer adjustment required Replaceable conduit Sealed level sensor
GMC-I-I Seculife SR
-
Function description: It is used to measure the electrical safety after maintenance or modification, or to conduct regular maintenance test -
Interface: USB data interface, which can connect 10 application parts (through 4mm plug) -
Product characteristic 1: Support multiple leakage current tests (direct, differential, equivalent) Optional 10A protective conductor measurement (PGS10 – Z745Y) ETC data management software (including) The test can be controlled remotely through ETC Fast and convenient report generation (PDF, WORD and EXCEL are available) One click display of test data Test program can be edited Can create tree data structure Interaction of tree structure can be realized through email
GMC-I-I Seculife ST
-
Function description: Electrical safety test of electrical equipment, or final factory test of electrical equipment -
Product characteristic 1: Automated testing can be performed according to the following standards: VDE0701-0702， Safety test of electronic and electrical equipment IEC62353 (VDE 0751), Electrical Safety Testing of Medical Devices KA01: IEC60601 Electrical Safety Type Test of Medical Electrical Equipment IEC60335， Electrical safety type test of hand-held electrical appliances and electrical tools IEC61010， Electrical safety type test of laboratory equipment
GMC-I-I SINEAX G537
-
Product type: Phase angle difference transmitter -
Function description: Detect the phase angle difference of synchronous control variable, which is applicable to the German marine standard GL of the shipbuilding industry. The output signal is used for indication, positioning, monitoring and control, and the safe electrical isolation and shockproof terminal block -
Power Supply: 24 – 60V AC/DC or 85 – 230V AC/DC (also from measurement input), 24VAC/24 – 60VDC, connected to low-voltage measurement -
Size: 69.1×70×112.5mm -
Product characteristic 1: Measurement input: calibration voltage input 10-230V or 230-690V Calibration frequency 50Hz, 60Hz or user-defined 10-400Hz Measurement range: 120 ° -. 0-120 ° or custom 180 ° - 0-180 ° Measuring range ≥ 20 °, clear indication within 175 ° -. 0-175 ° Measurement output: output range 0-20mA, 4-20mA, 0-10V
GMC-I-I SINEAX CAM
-
Product type: Current transmitter -
Function description: Intelligent electric quantity analysis device for strong current parameters -
Interface: Modbus/RTU can connect up to 32 devices (including host) with baud rate of 115.2kBd USB connection (USB mini-B, 5-pin), protocol USB2.0 -
Power Supply: Measurement input: nominal voltage can reach 693V (Ph Ph), nominal current 5A -
Size: 90×186×63mm -
Product characteristic 1: System configuration: single-phase AC system, split phase, 3/4 line 3-phase system balanced/unbalanced load. Clockwise and counterclockwise Rotating system Watt hour meter: the measuring system is active energy input+output, reactive energy input+output+inductive+capacitive, equivalent to 12 energy meters with external variables via digital or analog inputs. All electric energy high/low rates can be activated through the rate switch
GMC-I-I SINEAXTV829
-
Product type: Current transmitter -
Function description: High potential shunt and voltage measurement, -
Power Supply: 24–253VAC/DC -
Size: 90×22.5×118mm -
Product characteristic 1: Safety electrical isolation according to DIN EN61010-1 and DIN EN50124 (CATIII) standards High test voltage: 10kV Measurement range can be converted High common mode rejection ratio: 150dB
GMC-I-I SINEAXF534
-
Product type: MCZ Frequency -
Function description: Converts the frequency into the corresponding DC signal, detects the continuous and stable state of the reference frequency of the power system, applies to the German marine standard GL (only SINEAX series) of the shipbuilding industry, and outputs the signal for indication, positioning, monitoring and control, safe electrical isolation and shockproof terminal blocks -
Power Supply: Standard voltage input: 10-230V or 230-690V Power supply: 24 – 60VAC/DC or 85 – 230VAC/DC, 24VAC/24 – 60VDC, connected at the low-voltage side -
Size: 69.1×70×112.5mm -
Product characteristic 1: Measurement range: 45-50-55Hz, 47-49-51Hz, 47.5-50-52.5Hz, 48-50-52Hz, 58-60-62Hz or user-defined at 10-1500Hz Measurement output: output range 0-20mA, 4-20mA, 0-10V or, in the range of 1-20mA or 1-10V, it can be customized Output signal one-way, two-way or live zero Response time can be 2,4,8 or 16 times of input frequency cycle Accuracy: Class0.2
GMC-I-I SINEAXI542
-
Product type: Current transmitter -
Function description: German Marine Standard GL for the Marine Industry -
Size: 69.1×35×112.5mm -
Product characteristic 1: Measurement input: 0-1A/5A, 0-1.2A/6A or user-defined (0-0.5A to 0-7.5A, only one measurement range Nominal frequency: 50/60Hz Measurement output: 0-1mA, 0-5mA, 0-10mA, 0-20mA or 0-10V Or customized (0-1V to 0 -<10V) Accuracy: class0.5 (within 15-30 ° C)
GMC-I-I PROFITEST PRIME
-
Product type: Tester -
Function description: Applicable to AC and DC tests of electrical systems, machines, switchgear, industrial equipment, wind turbines, generators and motors -
Product characteristic 1: Compliance with standards and safety - PROFITEST PRIME series products safely perform all measurement tasks and comply with measurement safety standards Predefined test sequences for structured tests Coding plug ensures zero error in test Realize on-site help through the help function of wiring diagram Electrical safety class: 600V CAT III/300V CAT IV
GMC-I-I KE7207/KE7208
-
Product type: Network tester -
Function description: Create test report, which can be applied to active or passive networks -
Product characteristic 1: KE7207 includes KE7200 and line finder KE701, including test line, software and battery. The KE701 can precisely locate pairs of wires, cables in walls or unmarked harnesses. KE7208 includes active network tester KE7200 and line finder KE801,. Including test line, software and battery. KE801 can precisely locate pairs of lines, cables in the wall or unmarked harnesses. KE8 has optical fiber light source and the function of visual fault locator
GMC-I-I P500
-
Product type: Tester -
Function description: Test electronic and electrical components Simulate various pulse waveforms, For example, applications in the automotive industry Durability test Match to test system (analog or digital control) Power supply for sensitive equipment, such as laser equipment -
Interface: Digital interface: USB, RS232, GPIB (option) -
lcd: Two five digit display LED panels -
Power Supply: Output power: 500W, 800W, 1500W, 3000W and 4500W -
Product characteristic 1: Analog interface: 2 trigger inputs, 3 signal outputs, voltage and current control input ports (5V), output ports for voltage and current monitoring (10V), and induction ports for automatic compensation Memory: 1700 serial storage, 15 storage units for basic setting power output Power output: automatic range Output capacitance sinking: dynamic to 195W Set resolution (1mV, 1mA, 1ms)
Quotation of tester brand
-
Fluke tester (92) -
Leica Disney tester (6) -
Gaomei tester (69) -
Boyu power tester (10) -
Cybertester (8) -
Antianxia tester (10) -
NETSCOUT tester (4) -
FOTRIC tester (10) -
Anstar tester (2) -
Soldier searching tester (22) -
Ulic tester (4) -
Zhongchengwei tester (9) -
Huayi Power Tester (3) -
Addison tester (1) -
Guoheng tester (1) -
Dingsheng power tester (11) -
Chinese fir tester (4) -
Huatian Power Tester (3)
