The color is very accurate, and the printing fineness is very good.Even if it is 300 dpi, there is no graininess with the naked eye.However, in PS, you must set various color parameters by yourself. When printing, color management should not be carried out by the printer, but by PS.Just select the first line of the Epson printer at the bottom.Then you need to set the output proof.After the ink of this machine is matched with RC waterproof photo paper, the water resistance and color are very good.I just don't know if the color will fade quickly after using RC photo paper...Anyway, if the color is not set properly before printing and the printer's own management program is used to print, sometimes the color will be very heavy and ugly.
Most dissatisfied
Original ink, 70 ml, how can a set of 400 yuan.Actually, after printing 200 A3 art works, some ink was used up, mainly light red, light blue and yellow.There are about two-thirds of the other three colors.To sum up, excluding paper, the printing cost of an A3 photo with an original ink cartridge is about 1.5 yuan.The printing speed is relatively slow, and it takes three and a half minutes to plot an A3 photo.
summary
Generally speaking, this printer has no problem in producing photos. The colors are full and the images are delicate.A lot of printing costs are still a little high.It is planned to use Gezhige or Tianwei's image level ink.So far, nearly 300 A3 photos have been printed, without any problems.If it doesn't work well in the future, let's add some comments...
It has been used for a month, and I feel that it has one advantage over the previous l805!Ink head is not easy to block!Do not always clean the print head!Easy to use!The speed is about the same as that of the l805!In addition, the volume is large enough!It occupies a small table in the office, because playing 3a, it must be large!The installation is very simple. I use a Mac, and the link is automatically searched!It's really easy to use!Moreover, it is cheaper to print more than to save ink!Not bad Not bad!Always choose this print!
I have seen the comment area, purchase consultation, post bar, various reviews and forums for several days.Finally, I bought it in a tangle.Some people say that the printing process will stop, which is a real problem.When printing in high quality mode, the print head stops once after 7-8 times of left and right movement.The speed is slower than 1390. I don't comment on color because I use it to print plastic film for screen printing.This plastic film can be printed. I use original ink. The transparent one is not good, and the black one cannot be fully covered. (This may be a problem with ink or film. I only tested two such films.) It does not meet the requirements of printing.Waterproof white translucent film can be printed evenly in black, and there is no problem in printing.The printing accuracy is not very accurate, and it needs to be reduced by about 0.1% horizontally and vertically to be consistent with the real object.
Consumables are cheap, and the quality of photos printed is good.
Most dissatisfied
The paper feeding problem is too big. The newly bought machine has only been used for more than three months, and the driver has to be reinstalled every half month.Otherwise, it is blank paper, or even half a sheet of paper. It is not suitable to print small photos of 5 "and 6". It can't print 100% of the photos, but it will be better after the driver is reinstalled, but it will repeat again soon.....Sometimes, it drives me crazy!
summary
If the paper feeding problem and the problem of printing small photos are solved, it is a very good machine...
This printer is very suitable for photographers. It can print A3 size photos and posters. The printed pictures are very delicate and the colors are very real
The printer is very suitable for printing photos. It can print without edges. It is large and clear. The six color ink cartridge is full of colors, and the photos are so exquisite!
Most dissatisfied
It would be great if the printer shell were also colored, ha ha
The appearance of the printer is very impressive. The 6-color large capacity ink can be used for a long time. The print quality is very clear and the color expression is very strong. It is very suitable for advertising design printing.The original ink bin is designed without the trouble of refitting, and the original warranty is very reassuring.
Most dissatisfied
It's a little big, but it's OK to print A3 format.
The original consumables are cheap, the ink capacity is large, the later cost is low, the original continuous supply is stable, and it can be printed continuously for a long time.Moreover, the printed pattern has accurate color, and the presentation effect makes users very satisfied.
Most dissatisfied
I haven't found any shortcomings for the time being.
summary
A necessary sharp tool for graphic and literary societies.
The printing effect is very good, very clear, the post printing cost is much lower than that of the previous machine, the speed is much faster than that of the previous printer, and the printing quality is very good. The printed photos are colorful, but professional ones are different. Disadvantages: It would be great if the price of the whole machine could be cheaper. Conclusion: It is worth recommending.
Most dissatisfied
It would be great if the overall price could be cheaper.
70ML large capacity ink, which can be used for a long time. It really saves money!The image quality output is particularly clear and the color expression is strong, which is very suitable for photography players
Most dissatisfied
No shortcomings found for the time being
summary
A3 photos are printed beautifully and cost-effective
The company purchases it to print image design drawings. The print quality is very good. Six color ink cartridges are lifelike in color and the consumables are relatively cheap!
Most dissatisfied
The size of the printer is a little larger than expected.
summary
The colleagues in the design department liked it very much.
The photos printed by this product are very clear and satisfactory. The photos printed by this product have no area with the photo gallery. I don't know how long they will last.
The printer works well!The ink capacity is very large and can be used for a long time. A3 photos have high print quality, beautiful colors and good cost performance
Most dissatisfied
No shortcomings found for the time being
summary
Ink is forbidden to use, and there is a warranty, which is very affordable
Compared with the 1390, the color is far from obvious. First of all, I saw you talking nonsense, which led me to change from the 1390 to the L1800 at the same speed. After the L1800 was powered on for a long time, it was not easy to shut down, so I had to pull the back line. The color deviation was large, and I could not print anything bright red, which only made it dark red. So I regret buying this L1800 now,I knew how to use the 1390, because it is a new machine, so there is no paper jam at present. But Epson estimates that it is normal to talk about paper jam in the later period, and it is not difficult to talk about paper jam at present. Can you speak with your conscience?It's just a bunch of people who talk about what you absolutely own. Are you interesting,
To tell the truth, this machine is a piece of garbage. It costs nearly 5000 yuan, but it can't print bright red. The M100 Y100 print is absolutely dark red, darker than the bright red. It feels like adding a little black. It's just a piece of garbage
1、 Personally, I think the price can be further reduced. It is better to reduce the temptation below 4000. After all, sales will produce benefits. Secondly, consumables can also be properly reduced, because users need to be affordable, cost performance is the main thing, and what they need is to be cheap and occupy the main position.