Small and exquisite, cheap, good heat dissipation.You can install a video card with a length of less than 21cm.Support large power supply, water cooling
Most dissatisfied
The left side of the front USB interface and audio interface is not very good. I think my desk can only put the box on the left side. It is not convenient to insert a USB disk.It would be great if you could select the front interface and select the left and right sides, or if the USB was designed to the top, it would be perfect if you could choose one 2.0, one 3.0, and two 3.0 directly.There is no optical drive bit. It is useless to need an optical drive now.
summary
Fairly good overall.This price can reach the level of large power supply and slightly larger graphics card.Already very good,
The front plate, top plate and side plate of the fuselage are all designed with plastic clips, and the top fan is fixed with metal pins, so it can be disassembled and assembled without tools, and you can easily enjoy the fun of DIY.
The chassis material is still solid, the overall workmanship is good, there is a slight flaw, but the paint still falls off. The air duct is reasonable. When using the tower radiator, pay attention to the height, preferably within 150, otherwise the side panel bracket cannot be installed. In order to install an additional mechanical hard disk, I replaced the Limin ax120rse, which is only 148mm high, with the help of the upper and lateral brackets.For other advantages, first, it is easy to install, and second, the details are in place, including the screw free design and the treatment of the edge of the steel plate.
Disadvantages? Since they are all of this size, why can't they be a little longer? Wouldn't it be better to make a standard matx compact case?It can definitely greatly increase sales.To be honest, as an ITX oriented chassis, it is still too large.In addition, non-standard Matx motherboards are really not easy to choose. For this part, it is a bit of a failure.
In addition, the space for walking the back line is very small. The last two are the installation drawings of the competing products. It can be seen that the wiring is quite standard, and the side view is very beautiful. The same air duct design idea, as a big factory, is really cool and cold.
In fact, the size is limited. If it is higher, it will be more perfect. The reason for the size is estimated to be designed according to the idea of ITX, but really, it is not an ITX chassis in terms of the current size.
Of course, apart from this, I like its appearance, and the materials and workmanship are really good. Although it is a little imperfect, it is not unacceptable
The chassis material is still solid, the overall workmanship is good, there is a slight flaw, but the paint still falls off. The air duct is reasonable. When using the tower radiator, pay attention to the height, preferably within 150, otherwise the side panel bracket cannot be installed. In order to install an additional mechanical hard disk, I replaced the Limin ax120rse, which is only 148mm high, with the help of the upper and lateral brackets.For other advantages, first, it is easy to install, and second, the details are in place, including the screw free design and the treatment of the edge of the steel plate.
Disadvantages? Since they are all of this size, why can't they be a little longer? Wouldn't it be better to make a standard matx compact case?It can definitely greatly increase sales.To be honest, as an ITX oriented chassis, it is still too large.In addition, non-standard Matx motherboards are really not easy to choose. For this part, it is a bit of a failure.
In addition, the space for walking the back line is very small. The last two are the installation drawings of the competing products. It can be seen that the wiring is quite standard, and the side view is very beautiful. The same air duct design idea, as a big factory, is really cool and cold.
In fact, the size is limited. If it is higher, it will be more perfect. The reason for the size is estimated to be designed according to the idea of ITX, but really, it is not an ITX chassis in terms of the current size.
Of course, apart from this, I like its appearance, and the materials and workmanship are really good. Although it is a little imperfect, it is not unacceptable
It's really nice. It's almost compatible with ITX, so the graphics card is very suitable for the current situation where there is no way to pick a card. It's also easier to install than other ITX, although I asked others to help install it
Niuniuniu has searched the chassis for a month. I like this chassis very much. It comes out of the box in three days. Wow, it feels like silk. It feels great
This small Rubik's Cube case is a superior product designed by Cool Cool Supreme. I am equipped with a 120CPU water cooling radiator of Haimo. Two 12cm fans are used to clamp the water cooling exhaust to achieve efficient heat dissipation. One of the external fans is installed in the interlayer of the plastic panel of the case. Four 12mm long machine screws are used to pass through the single side of the fan and the interlayer in the front of the case to tighten the water cooling exhaust.I removed the foam sheet lined on the front panel of the chassis to let the air flow of the water-cooled exhaust fan blow out directly, with excellent heat dissipation effect!The tenth generation i9-10850K CPU I configured can fully meet the overclocking cooling requirements.There is also fan LED ice blue light.In a word, the small Rubik's cube case, together with the Haimo 120 CPU water-cooled radiator and water-cooled exhaust with dual fans for heat dissipation, is a perfect match, which makes me highly appreciate and extremely satisfied with the ingenuity of the design of the cool cool supreme product!
The wiring is not as difficult as expected. It may be that there is an extra section of the power supply Zhenhua Iceberg Kingdee half module for power supply, convenient for wiring Graphics card is the most basic model of Sotai 1650s destroyer I replaced the fan with a 4pin temperature control fan. The fan comes with a small 3pin to large 4pin. You can unplug the adapter cable and use a small 3pin to connect it to the motherboard. It can also control the temperature The air inlet of the power supply is upward, not competing with the CPU cooling The is40x for heat dissipation can be slightly higher The hard disk is installed on the side of the video card to hold the video card. It is hard to choose the hard disk installed on the side of the video card to hold the power supply
It has been a long time since I bought desktop computers. Now more and more people buy laptops. Desktop computers are not very popular because they occupy a large space.It's good to buy a small case and put it beside the computer.
This host is relatively small, and its space design is reasonable. It can install a standard power supply and a standard small motherboard. In addition, it can also install a standard size independent graphics card, which basically meets the requirements of conventional mainstream computer configurations. In addition, if you choose this chassis,The CPU heat sink should not be too high, otherwise it will conflict with the power supply
Standard power supply is available, which reduces the cost of the itx platform, and the size is acceptable.The interior of the case is blackened, and the steel plate material is quite good.Inadequate: The legend of screw types in the instruction manual is too small to distinguish, and there are too many types of screws.
On the whole, this small case is OK. The biggest advantage is that it can use standard power supply and full height graphics card. It has large selection space and is much easier to install.The height limit of the CPU heat sink is relatively loose in the ITX chassis. The workmanship is standard, and the steel plate is not too thick. At least it is much thinner than the Cool Cool Supreme in previous years.
The small case is good. Its expansibility must not be comparable to that of the large one, but the internal space layout is reasonable. It's OK to put a standard configuration. Disadvantages: The mechanical hard disk is not considered at all, the side top surface is not dustproof, and the protruding part of the power supply is a bit abrupt.
It's really beautiful. The most important thing is that it's small enough.It would be better if it were smaller.A small box is really good to use. It has just been renovated, and the box itself cannot be put down. You can replace this one.But when I first installed it, the wiring was very boring, and it took me an hour to install it.
Internal space: This small case looks small from the outside. The internal space is really not small, and it can accommodate a standard power supply.An HTPC specially used to play movies is equipped, and the amd3200g A320m motherboard is not equipped with a video card. Workmanship quality: the quality will be accommodated, but it will not be moved everywhere anyway. Heat dissipation effect: the internal space has enough heat dissipation, and the CPU temperature is not too high. Appearance: The appearance is my favorite type. It can be put on the TV cabinet to match with other electrical colors
Quality of workmanship: the workmanship is average, but the price is almost the same Appearance: The appearance depends on personal preference. Only a few cases with three hard disks can be found. The appearance is OK. The key is blue light, and the overall size is medium. Heat dissipation effect: except that the floor is full of ventilation holes, there is no problem with heat dissipation. It has a 12cm heat dissipation fan, which is very common, and it was removed when it came back. Tell me about the disadvantages: First, the accessory package sent eight hard disk damping rubber pads, all for the 2.5 hard disk positions on the side panel. The 3.5 hard disk can't be used, and the design is very unreasonable. The 3.5 hard disk only needs damping. The vibration of the upper hard disk is directly transmitted to the chassis, and it hums on the table;Second: Installing the hard disk on the top hard disk bracket will block the air inlet of the power fan. The power fan can only be downward, facing the CPU fan. I don't know if it will do any harm. Now I have to put it this way.
