ANTEC H600 Comments

Pressing 3770K is perfect! The water-cooled head is small and exquisite! The revolution is enough to exceed the 4.5G temperature on 3700K, which is very powerful! Another point is that the four support columns on the water drain can not only prevent hands from being injured by high count fans, but also prevent hard objects from touching the fan blades, which will cause the fan blades to break. The design is very user-friendly

I haven't found it yet

It's worth buying a radiator! The price is very advantageous in the single row water cooling area and worth buying

Unique appearance, soft pipes, beautiful fan color

The structure is unreasonable and there is a risk of water leakage. I used the leaking motherboard for more than 2 months and burned it,
The water cooling interface is loose, and the fan cannot be replaced

At that time, the appearance was very scary, so I bought it, but I really regretted that it was really bad. After sales helped me return it. The design of this product was really unreasonable, leaking, and noisy. I didn't recommend buying it

The temperature indicator is very intuitive

The noise is huge, the temperature suppression is not strong enough, and the cost performance ratio is not high (all compared with the Huanghai luxury version of double fans). I can't stand the first day. Make decisive changes. The measured pump has the lowest noise at 1750 rpm under 7V voltage and is basically consistent with the highest speed performance. As I received defective products, the original fan was deformed and the noise was serious. An over frequency three 4pin speed regulating fan was polished to replace the original fan. The water cooling head has curved concave surface, so the water cooling head and CPU are forced to be polished.

Integrated water cooling is easy to deal with low heat U. If your U exceeds 1000 yuan, you'd better ask someone else.

It can be used on your own 2550k. It is very suitable to use air-cooled OC4.5 roast chicken. The temperature should be more than 90 degrees. Replace it with H600
The temperature dropped by 20 degrees. You're right. It's 20 degrees

No shortcomings found for the time being

It can be used on your own 2550k. It is very suitable to use air-cooled OC4.5 roast chicken. The temperature should be more than 90 degrees. Replace it with H600
The temperature dropped by 20 degrees. You're right. It's 20 degrees

Not very good. I used the Z87 ASUS board before, but the capacitance around the processor was knocked down and the motherboard was returned..

The fixture is too big.. The round capacitor is crushed.

I wonder if anyone has this problem? It's useless for me to keep it at home now. A novice in installation.

The workmanship is pretty good, the appearance is beautiful, the whole chassis looks better than the air-cooled one, the brand of Antique is OK, and this is a good choice for entry-level water cooling!

The noise is a little loud, but it's still acceptable

The workmanship and performance are worth the price!

It can stand the test in many tests. It has advantages in size and weight, and does not occupy much space in the chassis!

The fan noise is slightly obvious! It is difficult to replace the damaged fan!

As a new generation of entry-level water-cooling product, it has done a good job in internal space processing, but can it be easily disassembled and replaced with fans to facilitate maintenance? On the whole, it is a good product!

Good packaging, user-friendly price, integrated water cooling, convenient installation

It is not easy to replace

Getting Started Preferred

Integrated water cooling, easy installation, no water leakage, cool appearance

The installation of the fastener is a little difficult, it is recommended to improve

A good all-in-one water cooling

High cost performance, low noise, excellent workmanship, full platform compatibility, and the very reliable quality guarantee of Antioch make it the best choice for entry water cooling.

You can't be too demanding at this price. It's perfect

Water cooling is the best choice for beginners

The package is exquisite, the quality of fasteners is good, the appearance is good, and the price is affordable

The fan and water pump are integrated into the cold exhaust, so it is not easy to replace the fan

In general, at the current price of 299, it is a very worthwhile purchase of integrated water cooling

The price is very low. Compared with the pirate ship, 400 yuan water cooling is not so good. High cost performance. Heat dissipation, very low volume, very good

Not as fast as the tiger shark of Kyushu Fengshen!

It's a good choice for entry-level water cooling

High cost performance, comparable to advanced air cooling, but light in weight, less damage to the motherboard

The fan and water pump are integrated into the cold exhaust, so it is not easy to replace the fan

In general, at the current price of 299, it is a very worthwhile purchase of integrated water cooling

1. The integrated water cooling is easy to install and will not cause liquid leakage due to assembly 2 The water-cooling head is very compatible with the memory. The comb and the light strip are not compatible at all. 3 Perfect control of pwm fan noise 4. All platform fasteners are available

It would be better to replace the plastic backplane with a metal one. It is suggested that an upgraded version or something can be made from this.

High cost performance, a good choice for friends who want to try integrated water cooling

1. The price is cheap and cost-effective!
2. Abundant fasteners, which can be used on all platforms at present, and are easy to install!
3 Integrated design of ultra-thin cold head reduces the load on the main board and prevents the main board from deformation!
4 The water-cooling head has a color changeable LED, which can not be missed by players who like the light pollution of the chassis!

1 Plastic back plate and nuts are easy to slip. If only the back plate and nuts were replaced with metal ones!
2 The noise of the medium speed fan is a little bit, and the friends of the night owl may hear it!
3 Fan power supply is 3pin. Automatic temperature control is not available, only control software can be used!

Several friends of mine just equipped a computer in early August. They formed a team to buy this one. One is 2550K OC4.5, which is basically stable at 40 degrees. The standby heat dissipation is good, and the noise is also OK
Another is that E3 1230V2 standby is not as good as Kyushu Fengshen Dark Ice 300. The game full load is better than Dark Ice 300, which is basically below 50 degrees!
Compared with similar pirate ships, the temperature is 2-3 degrees lower. Moreover, the fasteners are more abundant and new in style!

High cost performance, good performance!

The shape needs further strengthening!

The efficiency should continue to improve, and the appearance and fastening should be improved!

The package is exquisite, the quality of fasteners is good, the appearance is good, and the price is affordable

The installation is very laborious, and the fan is noisy. It is estimated that ordinary users will have to replace the fan. The temperature control is good. My AMD925 is 27 degrees standby

Friendly price, excellent quality, hard installation, loud fan noise

1. The integrated water cooling is easy to install and will not cause liquid leakage due to assembly
2. The water-cooling head is very compatible with the memory. There is no compatibility problem with comb or light strip
3. Perfect control of pwm fan noise
4. All platform fasteners are available

The space required for the water pump to be integrated into the cold exhaust is increased
Main board must be removed during water cooling installation

The entry-level cost-effective water cooling, you deserve to have heat dissipation capacity comparable to high-end air cooling