1 Good heat dissipation, supporting the old motherboard 4 years ago.(The interface is not easy to handle. I broke the screw base for half use. Don't complain that I can't install it. I really can't fit the hole) 2 I5 760 standby 30 degree wow low game does not exceed 50 degrees.
Most dissatisfied
1 The instructions are in English. 2 The built-in fan is extremely noisy.The 3pin interface does not support only temperature control on the motherboard. 3 To install an old machine, remove the whole motherboard and replace the base screws.
summary
The integrated design saves the chassis space.Stable heat dissipation performance.I don't know how long it will last.After replacing the 4pin fan, the noise will be much lower.Installation requires some skill.Remember to remember.
The heat dissipation is good, the room temperature is 18 degrees, the standby temperature is 26 degrees, and I can play stand-alone games up to 70 degrees.
Most dissatisfied
The original fan is so noisy that it has to be replaced decisively. The price is a little expensive.
summary
Apart from the fan, everything else is very good. I've only been using it for a week. Let's see!
When I received it today, I immediately installed a small case. It's better to water cool it. I can directly exhaust the hot gas outside. The standby temperature is about 7 or 8 degrees lower than that of the tower type. There is no problem for the time being
The thing is very good, but the model of the screw hole is not clear. I modified it myself before installing it. The effect is very good. The CPU is 17 degrees, and it's a lever. I hope that the next presentation will explain it clearly. The customer service explained the professional problems in an average way, not professional, difficult to solve technical problems
Effect: good cooling effect, recommended! Sound: The fan speed can be adjusted through the motherboard bios, which is completely acceptable after being adjusted to the standard.The water pump makes little noise.I don't know how some comments that are noisy came out. Appearance: The radiator is of good workmanship, very solid. Installation: not very convenient, especially when the pump head is installed on the CPU. Fan direction: The radiator is installed on the top of the chassis, and the fan is installed below the radiator, with the wind blowing upward.I think it is good for heat dissipation, which is different from the installation in the manual. Silicone: It's already on the radiator water pump head, so you don't need to apply it. It's very good and convenient.
Not bad.The only regret is that there is no faith lamp.The instructions are all in English.I didn't know how to start at first.I studied and installed it.If the fan is installed with air blowing from inside to outside, it is necessary to find 4 additional screws to fix the cold exhaust.Master Naru baked it.The former black ice 400 rose to more than 70 degrees after being roasted for 10 minutes.The maximum temperature is 46 degrees in half an hour.
