There is no PIC interface, and the material shrinks seriously. After a month of use, the tragedy came: first, the CPU fan broke down for no reason. The fan was worthless and replaced with an overclock three. Then a new fan was replaced. It was found that the fan did not rotate when it was running, which proved to be caused by the motherboard problem. Then the time jumped wildly. For example, at 1 o'clock, it suddenly jumped to 2 o'clock, or at 2 o'clock, it suddenly jumped to 1 o'clock again and again. I was tired of jumping to my heart,And the time is always 2 hours before power off, even if the power is plugged in, it will stay for power off.No major problems found, a lot of minor problems,
1. Military grade all solid state capacitor, except for SATA3, is basically no different from H67.2. USB3.0, complete interfaces, medium range of materials, affordable price, good cost performance
Most dissatisfied
Unfortunately, SATA 3.0 is not supported, and the memory socket also supports up to 8G of memory
summary
I think it's pretty good. There is enough room for upgrading. There will be high demand in the future. You can add a video card. Basically, you can cope with anything.
It can support i3, i5 and i7, and the graphics card can also support a lot. This price is very good for the low-end magic device, and it has a long life. It has been safe for 10 years, and it has never been dusted. It has been disassembled more than a dozen times. Except for the capacitor frying pan twice this year (I'm not sure whether it was the main board capacitor that exploded, it should be the power source, and there is no damage to the main board capacitor), no other problems have occurred
Most dissatisfied
Low end people say it is easy to be bad,
summary
The king of low-end cost performance, but will soon become obsolete
It is estimated that the quality of all solid state is not very clear
Most dissatisfied
It seems that I haven't seen the mini board for a long time when I played with the computer on Taobao. I just came back to see my pocket size and there is no original 3.0 cup~~
It is cheap and stable. Although it is shrinking, it has produced many pieces and has not been repaired yet! PS: I am a small computer businessman in Hebei Province.
Most dissatisfied
The first batch of 40 chips 1.0 version with HDMI output and five phase power supply, ALC662 sound card, sold out and just bought the second batch of 40 chips 2.0 version, HDMI was gone, only DVI and VGA remained, and five phase power supply was maintained, the sound card became ALC661, which is not the end. The previous two days the purchase became 3.0 version, five phase power supply became four phase.Finally, the highest level of shrinkage has been achieved. Without affecting the general performance, we will try our best to shrink!Onda, have you!
summary
Just for cheap, let's choose him. The H61 is a very mature chipset and does not require high power supply. It is more than enough for a G530, G620 and so on!
The materials and functions are not good. At the beginning, I was interested in his hardware configuration, which is the higher configuration of all H61 models, with good cost performance.
Most dissatisfied
The bios performance is too weak and simple, and there are also bugs: the hardware identification is wrong (the sata 1 interface inserted in the hard disk was identified as 2 by me), and the temperature monitoring system is not reliable.
summary
This board has a good hardware constitution, but the bios is so bad. There is no AHCI for the outgoing bios. If you want to use it, you must brush the bios (this bios version has just come out, it is still a beta version, and you can download it on the official website), which brings great inconvenience to ordinary users.S3 mode power management is not supported yet.I hope the manufacturer can improve the bios as soon as possible. Only in this way can this board give full play to its due performance!(This may be the gap with first-line manufacturers.)
The material used is solid, 499 H61 has USB3.02, all solid state capacitor, hard network card, ferrite inductor
Most dissatisfied
1 When using a long video card, two SATA interfaces will get in the way. The board is designed with six ports. If one port is replaced by three ports, the effect will be better. Graphics card 2. There is no SATA3.0 interface, which is a bit weak. The speed of SSD disk cannot be improved...You're not going to let me connect to USB 3.0, are you??And whether USB3.0 actually has such a high speed is not clear.. 3. The temperature display is wrong. I just started up and the mainboard temperature was 63 degrees. I used an infrared thermometer to call Nanqiao and near the CPU, and it was less than 50 degrees
This motherboard is just cheap.And it is still shrinking.1.0 HDMI and PCI are available.2.0 is gone.I bought 2.0 RMB 275.Just when I think this motherboard can no longer shrink.The 3.0 on Onda's official website came out.Look at the picture... There are fewer solid state capacitors.
I don't like playing games. I prefer this mini board. The workmanship is OK, and the upgrade space is large
Most dissatisfied
The parameters are incorrect. There is no onboard HDMI. The graphics card slot is the last generation high-speed channel type, but I basically only use the U with its own core display