Zhirui war police A5, the first choice for tough guys!The appearance is really cool, I like it very much, I believe that men will like it!RTX architecture, more reasonable heat dissipation;The switch USB is top mounted, which is very convenient to use. There are four USB interfaces, two of which are 3.0 - or native, two 2.0;The transparent side panel can clearly see the working condition of Aiji;It is equipped with two 12cm cooling fans, one at the front and one at the top. The front fan is LED and equipped with dust screen;The space for back wiring is ample, and the wiring clamping positions are also very rich;The optical drive and hard disk are easy to install without screws
Most dissatisfied
It would be better to install a cooling fan later.And the power supply has not kept pace with the RTX architecture
summary
In general, it is a very good product, and you deserve it!
Four USB, two of which are native.Two fans are standard, and the side panel is still transparent.What I like most is the big X in front of the panel and the LED logo on it. It's so stylish and absolutely tall, rich and handsome.The inverted 38 degree architecture is also the most popular one at present. Seeing that JD has reduced 30 points from 239 points, it won decisively.The thickness of the plate is also better than I expected, very real
Most dissatisfied
It's a little big and heavy
summary
The appearance of Zhirui's chassis is becoming more and more powerful. It's very good. I have already bought several. Is it possible that another cutting-edge game brand will be born? Be optimistic about this potential stock!
I have always liked Zhirui's chassis. When I came out with this A5, I understood the fashion and arrogance of its appearance at the first time. Needless to say, this chassis also uses the latest RTX architecture and is equipped with two chassis fans. The most noteworthy thing is that this chassis also has a native USB3.0 interface. Although most chassis now have USB3.0 interfaces, the price is lowMany of the chassis are not native
Most dissatisfied
I haven't found anything yet
summary
This kind of chassis is just two words. It's really good that the chassis at this price can do this
1. The thickness of the board is quite good and solid. 2. I bought it at a physical store for less than 250 yuan, and also gave away two LED fans, which is quite affordable. 3. There are two original USB 3.0 boards. I use the B85 board, which is sufficient. 4. This is just the right size for me. It's bigger or taller. I can't put the mainframe under my computer desk. 5. Screw free design, very convenient.
Most dissatisfied
1. The side transparent plastic plate is slightly deformed.I don't know whether it's my own problem or all of them.However, it does not affect the use. It is awkward when loading and unloading. 2. The original two front USB3.0, because there is a problem with the connection line.It works well after changing the thread.The seller said that it was the problem with the batch of lines, but later production was not that problem.Two 2.0's have not been used, so I don't know. 3. In the advertisement, Gao Fu is handsome.Take the real thing home and put it on. It's a matter of perspective 4. This is not a disadvantage. Basically, no case can guarantee this, but let's write it in - the home is not a laboratory, and dust screen can also be used to enter the dust, which is just a matter of degree.
summary
I really planned to choose the premium version of Sima Leader. I have asked several times, even the general representative. But when I installed the machine, I found that the chassis of Sima is too large, which is bigger than the space under my computer desk. I can't put it in when I buy it.So I plan to change it.The chassis is just the right size, the workmanship is OK, and the image is also good.Two LED fans and double dust-proof screens are also provided for less than 250 yuan.Personally, it's a good deal.So he took it.
1. The original USB 3.0 is not easy. 2. The top panel is cool and thick. 3. The optical drive bit is easy to remove.
Most dissatisfied
1. (I spent 165 yuan) She said that an overhead fan is standard.In addition, the front plate must be removed before the top plate can be removed. 2. Acrylic side transparent plate is easy to be scratched. It's impossible to ask me to apply the film.
summary
Cheap without good, "standard configuration" is likely to be determined by the price.
Invert the chassis to make the internal temperature of the chassis higher. 1. The ATX chassis video card fan blows upward, and the hot air evaporates upward. It is attached to the CPU heat sink to walk upward, and the principle of three-dimensional heat dissipation is achieved through the power supply or the opening on the top of the chassis. The RTX video card blows downward, and the heat flows backward. The CPU heat also flows backward below, and the three-dimensional heat dissipation temperature is not higher!
The case is very big, and the white one is very beautiful!There is enough space to walk along the back line, and the heat dissipation effect of inversion still needs to be observed
The price is affordable, and the materials are sufficient. You can go back and give away three fans. The main emphasis is on the RTX architecture, and the temperature has really dropped a lot
The chassis is large, enough space, no problem with heat dissipation.On the left side of the chassis, a piece of transparent plastic was inlaid in the middle of the metal plate.Good looking is good looking, not solid.The chassis installation is very convenient, there is no need to buy a special back line power supply, and it will not be short.Can give more than 80 points.
The chassis looks very beautiful, and the internal design is also very reasonable. The wiring on the back is an advantage. The three fans are also very quiet. The effect is good, very cool and cool. The chassis gives people the first feeling of being particularly comfortable, especially valuable.There are many aspects I am satisfied with, and I want to mention the shortcomings. First, the chassis is light, without the feeling of being heavy. The iron sheet is very thin, and it will deform if it is slightly stressed
The chassis is large, but the USB is not good and is easy to get dirty. There are only two of the three fans mentioned, which is not a big problem. It is enough
There are still many wiring holes on the backplane.But they are not the same products as those in the picture.JD has 3 fans and SSD special shelves.The side plate is transparent acrylic, not the mesh punched by the steel plate.The rear PCI bezel is not removable with mesh and is disposable.I wanted to buy a big one, but the result space was average.Plate thickness is OK
At this price, it's OK on the whole.By the way, the slot is ejected, and two fans are equipped as standard. The air volume is too small, and basically has no effect. Only when three XX Aeolus blades are purchased and installed, the cabinet temperature is improved.The side plate is not tightly installed, and there is a slit on both sides, which is transparent
Very good · Very powerful · But some LED fans on the panel are on · some are not on · the noise is still loud · I don't know why · Generally speaking, they are very good···
The chassis is very thin. Some parts are made of so-called iron sheet, which is pitifulThe appearance is the same as in the picture.The box is very large and takes up a lot of space. Of course, the internal space is also largeAfter careful study of its internal structure, I felt that the fan design was somewhat unreasonable, especially the air inlet fan on the front panel.
The chassis has been bought for a long time, and there is no problem using it now. The appearance is very aggressive. Last time I saw the bad comments, I didn't dare to buy it - -I bought it later. I felt it was OK. That's all~
Very good cost performance, very good interface, but the front panel is hard to remove. It's a miracle... If there is a fan in the front, you can also buy one in the back
