The compatibility and details of the chassis are very good, especially hard disk cooling and graphics card cooling.Highlight...This price is invincible..
Most dissatisfied
The appearance is not cool enough.Surprised performance...
summary
The standard practical game chassis has outstanding performance and excellent price..
The separate heat dissipation of the graphics card is novel and unique. The tool free disassembly is excellent. The design of the hard disk shock absorption bracket is unique. The standard configuration of three 12cm fans is very honest. The heat dissipation performance is outstanding. The body is full of weight, and the back line space is large. Novice can easily route cables, and the front panel does not need tools to disassemble
Most dissatisfied
The disassembly of the set-top fan box is very troublesome. The fan box cannot be disassembled without disassembling the motherboard. The set-top fan is not as noisy as the panel fan. It is recommended to replace it by yourself. The panel wire material is rough and needs improvement. As a game case, it is single black and the appearance is not fashionable enough
summary
The heat dissipation performance is outstanding, very practical, and the price is reasonable. If the appearance is more fashionable, it will be more perfect
The thickness of the chassis is not bad. It supports back cable management and lower power supply. The left side of the chassis is transparent and can see inside.If it is better to use LED fan, mute LED fan is recommended
Most dissatisfied
The machine does not have its own fan. It is troublesome to clean the front dust screen, especially the front fan, which is particularly difficult to install. The board for installing the main board is thin.
summary
On the whole, it is a good chassis with high cost performance. It is suitable for game players. It has good heat dissipation and can be installed with 9 fans.
The elegant appearance is more suitable for boys.The front USB 3.0 front hard disk interface is complete.The transparent side panel works well with the luminous CPU fan.
Most dissatisfied
The CPU power cord is not arranged with a good hole. The hard disk holder needs screws to install the SSD. The front USB2.0 is a bit loose.It would be great if the wire of the front panel could be a little longer
summary
It is still a case worth buying. Unfortunately, there is only one USB 3.0 front, and the other has a location but no USB.The chassis does not ship fans.The installation of the main steel plate is slightly thin.The blue light of the power supply is praised, but the red light of the hard disk is very cheap.
Good appearance, rich interfaces, equipped with three fans, one for blowing in the front, and two for drawing in the top.In addition, the graphics card CPU radiator power supply has 7 fans, and the CPU load of 45% does not exceed 40 degrees.
Most dissatisfied
The panel is too thin and soft. The radiator is a little big, so I'm afraid it won't hang.I should spend more money to buy a chassis with better plates.
summary
Good value for money, big graphics cards can fit in.ASUS GTX650TI dual fan I use
The thickness of the plate must be more than 0.6. There are three built-in fans, and the front fan is equipped with LED lights. The back line space is sufficient, and the heat dissipation is very powerful. When you put your hand on the chassis, you can obviously feel the strong wind from the two top fans. The chassis also provides a video card fan rack. You can add your own video card fan, and the shape is also good. Friends who do not understand computers say that it is a good chassis just because of its appearance. There was no comment from netizens when I bought it, which was very unpopular. I was very confused at that time. After careful study of various parameters, I thought it should be a good product worth buying.It's really good. Such a good thing should not be buried. It's highly recommended.
Most dissatisfied
After 2 months of use, there is a lot of dust on the mesh of the front panel. I can't help it. The case with good heat dissipation is poor in dust prevention.
summary
More than 200 yuan can buy such products, which is an absolute value.Roll other products at the same price.
It has powerful functions, including blackening, backplane, power supply, USB 3.0, and SSD support The compatibility and details are very good, especially the shockproof design of the hard disk and the independent cooling design of the graphics card
All the chassis at this price should have functions, which is very good. The temperature control is cool, and the appearance is reasonable. It's OK for me. The hard disk rack is well designed. The light is beautiful, the back line is simple, and the chassis thickness is OK
Most dissatisfied
The fan is actually a D head, not a 3PIN. It's too inconvenient to install a deceleration line. The fan on the top of the machine is too noisy, and there are too few hard disk racks. It should not be expensive, but it hasn't been sold on Taobao,
summary
Very good overall, the functions fully meet their own requirements, and the details should be better, such as the fan socket
For the chassis, I pay more attention to dust prevention, Because I don't want to bother too much.This case is dustproof Dust proof and washable lower power supply
Most dissatisfied
The USB 3.0 is placed on the top of the machine, and it is not easy to use my case under the table
summary
Very good box, good wiring and dust-proof, cost-effective
With 3.0 interface, the side panel design makes the back line very simple and easy, and the seismic hard disk position is very convenient. It also supports 2.5, which is very considerate.Equipped with 3 fans, pci fan position, blackened, well made, no deformation of side plate, penetration measurement
Most dissatisfied
The two fans on the top are too high in speed, which makes too much noise. It's a pity that there is no independent switch on the front fan light because they don't have these two magic tools when they are purchased in groups
summary
I feel that the price is superior to the price when I get it
There are too few steel plates in the front. The left side is made of transparent plastic. Will the ventilation holes in the back be not dense and small enough? Will this design easily cause radiation? The fan on the front panel seems to be easier to vacuum
On the whole, the appearance is very beautiful, the heat dissipation effect is obvious, and the video card heat dissipation rack is sent. This is very practical. When the room temperature is 27 degrees, the video card test was carried out. The original temperature of the doughnut is 77 degrees, and this chassis is basically stable at 75 degrees. The heat dissipation effect is relatively obvious, and the side penetration effect is good. After installing several fans with lights, it is beautiful and very satisfied.
Most dissatisfied
There are too few hard disk racks, so they just gave away three. If there are more than four hard disks, they cannot be installed.
Top!Routing is not only a technical job, but also a physical one!It took me several hours to get a little satisfied. I'm tired.Things are great!I particularly like the external SATA, which is convenient.
The material object is more beautiful than the picture. It is very cool. The materials are solid. The instructions are very detailed. There are screws inside
This is a good chassis, with sufficient internal space and good expansion capability.During transportation, the side transom fell off. Since it is connected with the side cover of the chassis by metal clips, it is easy to install it by yourself.The accessory package of the chassis is not fixed, so there are many scratches on the inside of the side transparent plate, which affects the appearance.In addition, the original box of the case is used as the packing box, and only two thin foam plates are placed on the side. Fortunately, the express company is good, and no other damage is caused to the case during transportation.
1. The chassis is very good, with sufficient workmanship and thick feel;2. At present, the parts are not complete and the machine is not installed, but there is a lot of space left for the back line;3. USB, e-SATA interfaces and buttons are exposed on the set-top, and the visual effect is satisfactory, but they will definitely accumulate dust in the future, which is inconvenient to clean;4. There is no dust-proof cotton net behind each metal net. It is just a layer of wire net, which has little effect and is useless;Nothing else. On the whole, this case is worth buying. You can do your own dust-proof work later. It's very large
The chassis is large enough, and the appearance is also very handsome. The LED fan is pre installed, which makes it really cool to work in a dark environment.Others say that it is black and valuable to buy such a large chassis at a price of more than 200.Tell me about the details. Some parts are still not fine enough. For example, the size of the side transom is slightly different, which is not easy to install.The cable interface of the chassis is cracked individually.There is some deformation on the side of the chassis. I don't know whether it is caused by violent delivery or something else.Generally speaking, it is cost-effective.
