After the TAC 2.0 chassis came out, I thought BTX would become the mainstream.But after seeing this inverted 38 degree RTX chassis, I immediately changed my mind.This structure has several advantages: 1. Compared with the BTX structure, the heat dissipation performance of the CPU, graphics card and power supply is better. Because of the larger spacing and more reasonable layout after inversion, the heat dissipation capacity of high-end U and graphics card will be stronger. 2. It is cheaper than BTX chassis.The price of 259 is amazing. Now the accessories are really cheap!The cool destroyer used in my previous main box starts with 295. 3. It can reduce the cost of power supply.Because the power supply line does not need to be lengthened after the motherboard is inverted in this model of chassis, the general 400W power supply is chosen, and the cost is much less than the power supply that supports the backplane. 4. The process details are good.According to the picture, the workmanship is OK, and I like the shape of the top.The side and bottom plates have all been shaped.The heat dissipation and shock resistance are also well considered. 5. Full personality.I believe my friends will be surprised to see that the main box is upside down.If the fan is equipped as standard at this price, it is worth getting started.
Most dissatisfied
1. The brand is not very well-known. 2. Only two screw free brackets are equipped.If you are a fan, it will not be enough. 3. There is only one type of panel, which is less selective. 4. Unknown.I haven't seen anything in kind.
summary
Finally, I saw the innovative chassis, which is worthy of praise.But hope is not a flash in the pan. Domestic products are not only competing for price, but also have innovative technology in addition to price advantage.I hope to see this kind of chassis coming on the market in Wuhan as soon as possible. I am going to install this chassis in the near future.
The design of the inverted 38 degree chassis is really awesome, and the cabling no longer needs to pay for the so-called special power supply for the back line.The blue motherboard looks fresh.The full face design is full of mechanical feeling, and the top fence design ensures that the heat dissipation equation is correct.The unique layered air duct solves the problem of mutual interference of heat between components, which is good!The hardware of this product is also good, quite thick, and the back line space is beyond your imagination!After the motherboard is inverted, the wiring is more convenient!
Most dissatisfied
Not found yet
summary
Generally speaking, it's pretty good. The price of 259 is not expensive, and it's worth more!
New design, novel appearance, appropriate price, perfect solution to the cooling duct!
Most dissatisfied
None
summary
The new air duct design completely solves the problem that the chassis power cord is not long enough, and it will certainly become the first choice for high, middle and low-end users!
The length of the power cable is not important. We all know that good power cable is long enough. It is inconvenient to take the back cable! Improve the efficiency of air duct utilization, respond to the national call for energy conservation and emission reduction! The graphics card is isolated for heat dissipation. The independent heat dissipation effect is good. The service life is longer! The interface and wiring installation are more convenient!
Most dissatisfied
nothing
summary
Advantage, big design, new price, excellent support for domestic brands
Perfect air duct, video card on top, power supply on bottom, easy back line, support for water cooling, cool appearance, color coordination, solid structure The power output line does not need to be lengthened, and we can install the longest video card!
summary
RTX chassis, another great change in the history of chassis!It is the trend of the times and the people's will!
The opening mode of the chassis is different, which is reversed.Heat dissipation is good.The board is also very good.On the graphics card, the heat dissipation is good.The topline is easier to see.
Most dissatisfied
The panel is not burned enough.
summary
Very good overall, but the style is a little short.Insufficient selectivity.
Zhongguancun Online has said so many advantages, which is worth looking forward to.It is a good choice for playing games to solve the problems of heat dissipation and mute. When will there be a product on the market?Good things must be tried to know the true effect.
summary
Looking forward to the actual effect, I will try it.
A few days ago, I paid attention to Zhirui A4, and soon the factory came out with a new A6. It seems that the factory has designed a series of products, which is a good thing for consumers, with more panel options.On the other hand, it also shows that the factory has a large investment in RTX and is full of confidence.In addition to the more impressive panel, the lower half of the A6 is designed with a full iron mesh to facilitate the installation of fans. The A6 also has a side view on the side panel, so that enthusiasts can see the operation status of the hardware inside the chassis without opening the chassis.If the side panel is equipped with color light fan, it will be more cool!
Most dissatisfied
Hope the price is not too expensive. It is more acceptable if it is 20-30 yuan more expensive than A4
summary
It is good news that the new product is coming on the market so soon.
The design of 180 degree inversion inside this chassis is really good, and it is very innovative.It has broken through the chassis market and only focuses on cooling and panel design.The internal cooling air duct of Zhirui chassis is designed scientifically.
Most dissatisfied
The brand awareness is insufficient. It would be better to thicken the plate of this chassis.However, the 259 price case is very valuable.
summary
During the National Day, I arrived in Yichang and saw the real thing. I felt it was good overall.Civilian prices are acceptable to everyone.Five have been sold. It is easy to use the internal back line, and the common power supply can also use the back line.The design is very scientific and humanistic. It is expected that Zhirui will produce more good products and more high-quality products to satisfy consumers in the market.
Back wiring is a new concept proposed by chassis manufacturers in recent years.When it comes to back wiring, we have to put the power supply under the chassis.In 2008, a small number of player brands introduced the concept of lower power supply in high-end chassis.The ordinary chassis power supply is placed above the CPU instead of below the PCI slot on the motherboard, which achieves the purpose of separating the power supply from the CPU heat source and radiating heat independently, and can reduce the center of gravity of the host for easy placement. In the early days when the power supply was placed under the chassis, the concept of back cabling was not introduced, so there was no corresponding cabling hole on the backplane.The back wiring is a supporting concept proposed after the concept of power supply placement was accepted by the market.The lower power supply is designed to realize the independent cooling of CPU and power supply and enhance the cooling effect.The back wiring has the same goal.As disordered wires are placed inside the chassis, serious wind resistance will be formed, which is not conducive to the formation of cooling air ducts in the chassis.Therefore, put the wire behind the backplane, and only need to expose the wiring at the connector of the motherboard. The interior of the host will get rid of the interference of the wire, clean and tidy, and also convenient for heat dissipation.
I saw this chassis in the chassis evaluation, and I saw that this chassis has three advantages. 1. The back cable is not picky about the length of the power cable, 2. The video card is not picky, 3. From the design of the air duct, the heat dissipation should be excellent. The most rare thing is that the integration of the three advantages makes me very excited. Another thing is that I also like the appearance
The parallel air duct design has excellent effect. The graphics card is placed on top, and the heat is pumped out by the top fan;The hard disk and CPU form a parallel air duct, which is scattered from the backplane;The air enters at the bottom of the power supply, and the backplane disperses.This design concept is amazing!
Most dissatisfied
No
summary
Zhirui chassis is really powerful today, and the RTX structure is very desirable
Zhirui inverted 38 degree RTX chassis is a chassis with excellent heat dissipation I expect!
Most dissatisfied
The panel is not strong enough
summary
The inverted 38 degree RTX chassis of Zhirui will completely solve the problem of computer heat dissipation and the problem of short power cord for back wiring
The inverted chassis itself breaks the traditional cooling mode and has a good advantage for its graphics card cooling
Most dissatisfied
It's just great
summary
The overall appearance is fierce, full of mechanical and texture. The three fans at the bottom of the chassis, the hard disk and the CPU heat sink have good heat dissipation effect and high cost performance, which is worth looking forward to.
The price is cheap. It also has some selling points. It supports 8 hard disks, which is basically a function of the Zhongta server.
Most dissatisfied
There is no shockproof pad, and the panel is not big enough
summary
The price is still reasonable, the RTX structure is relatively new, and the factory still uses some brains.It seems that we haven't seen the real products of Hankou type chassis yet. I don't know who is doing it. I am going to install a new server in the near future.