Only one memory slot (4GDDR3 is supported at most) Centralized display is equal to none Xiaoban Mining Development Co., Ltd
summary
Pretty good. I won't be disappointed on the whole. But I won't buy Onda's boards in the future. I can't find any advantages except that they are cheap. But computer performance is the most important. No matter how cheap the price is, it's rubbish
I used this board model to install hundreds of machines, and found that it was very tested, almost zero repair rate!The radiator is very beautiful
Most dissatisfied
At the beginning, the first batch of G31 and G41 all used large inductors, but later they all used small inductors, and the memory module was too close to the CPU. Adding a large fan almost took up a place. Secondly, the board was too small, which made people feel seriously shrunk and inferior. It could make the medium board better,
summary
The performance and quality of the board is really good. If it can be more general, the brand will never be inferior to ASUS and MSI. In fact, ASUS and the problem and repair rate are also very high. There are nearly 10 boards that need to be repaired after 100 machines are installed~
I bought the version of PCB4.0. Onda is too economical. Version 1.0 also has two PCI slots, four SATA ports, and two front USB ports.Version 4.0 has been halved.In particular, there is only one front USB port, and there is also a capacitor in the way.The USB port on the front of my chassis is used, and the card reader on the front cannot be used.The CPU socket is too far out. The CPU heat sink conflicts with the system fan.
summary
From the pictures on the official website, 1.0, 2.0 and 3.0 are almost the same, but 4.0 has been reduced by more than half.The version 4.0 also sells 399, which is really expensive.
Of course, the price is cheap and the operation is stable.The interface arrangement is reasonable.
Most dissatisfied
External frequency adjustment is not supported. There are overclocking and voltage adjustment options in BIOS, but they cannot be adjusted.There is no video card fan connector, so the CPU and motherboard temperature and fan speed cannot be monitored.BIOS is almost one-time.
It's a bit cheap, of course. Let's not mention the material. I used the memory of my previous two tapes for a while, and then directly replaced the 4G DDR3 interface. Only two ordinary users can use the sata interface. I just have one hard disk and one optical drive. The north bridge heat sink is pretty
Most dissatisfied
Some people say that the sata has only two memory slots, not all solid state capacitors, but I think ordinary players have enough. I'm playing with the E6700 HD6750
summary
More and more Chinese people support domestic brands to use domestic products. I hope the quality of domestic products will be maintained!
It is a cheap motherboard, only 399, G41 ICH7 chipset, integrated with GMA X4500 integrated display core, supporting DirectX 10, Shader Model 4.0 and OpenGL 2.0 specifications, and can realize high-definition playback in H264 and VC-1 formats
Most dissatisfied
The default frequency is 1333MHz, and the processor is only 45nm. Now the mainstream processors are 32nm
summary
The entry-level motherboard is superior to the price, and its performance is relatively mediocre
The motherboard with this CPU socket is a bit hard to buy. In addition, the two memory sockets of this motherboard can use DDR2 and DDR3 memory modules respectively, and there are two PS/2 sockets (many motherboards only have one!), which makes my idle memory, CPU and keyboard and mouse come into use!Good workmanship!Really happy!
Both DDR2 and DDR3 can be used. It is highly applicable to the 775 pin CPU. It has been actively recommended to friends. The friends who bought it also said yes