ASUS P8Z68-V LX Comments

Equipped with I5-2320, 4G memory, 500G Western Digital hard disk, the boot speed is 27 seconds, the ancient five high special effects can run smoothly, and other mainstream games can run smoothly.

The memory compatibility is poor. I used it for a month, but it seems that there is a bad memory block. I installed the blue screen, removed the optical drive, and repaired it at the computer store for a long time. After checking, I said that there was a problem with the memory, which somehow made the optical drive incompatible.

Anyway, it's very difficult now. I don't know whether to change the memory or add a memory. The dual channel 8G is afraid that the machine will have another problem.

It was purchased at the beginning of December, equipped with Xeon E3 1230, 8G memory, 64G solid state disk, win7 64 bit, and 18-19 seconds of startup.
Usually used for high-definition video editing, basically satisfied.

Occasionally, the light of the hard disk is always on when starting up, and it is slow to start up. It can be recovered after restarting, and it is useless to replace the hard disk. I wonder whether there is a problem with the motherboard.

The quality of ASUS is affordable.

Large plate, all solid, durable

I haven't found it yet

Try it. I hope it's true

It came into use in January 2012 and is still in use. There are many M2 interfaces in the hard disk search. This board does not have

I don't understand this without it

Chinese BIOS, easy to operate! There is a USB3.0 interface. The latest 3703 BIOS supports the latest Intel 22nm CPU (only E1230 has been tried at present).

quite a lot! 1. Win8 and Win7 64 bit systems cannot be installed (five p8z68 vlx have been purchased). The installation of Win8 is unsuccessful. The 64 bit system of Win7 always has blue screen and crashes (these two cases have been found at present, and the rest need to be tried). 2. After automatic standby, the proportion of computer wake-up failure with keyboard or mouse is around 10:4 (WIN7 32 bit). 3. N card fire fighting is not supported. Other small problems will not be listed one by one

The eunuch version of z68 is too tight, so I don't recommend buying it. I'm not good at expressing myself. Please forgive me if I can't speak!

usb3.0， Board and unique display switching, SATA 6GB interface and support for solid state disk, which can be said to facilitate future upgrades. The Chinese menu of BIOS and innovative operating experience are also great progress!

The price is down by 100, and will be invincible in the market.

In October, 880 Dayang bought it and the I5 2500K is a perfect match. It is expected that the computer host will not need to be replaced in three years for general applications, drawing and 3D games.

There are many advantages, such as large factories, good materials, good performance, bios graphical interface and mouse support.

There is only one disadvantage found. The hard disk cannot be found after the computer is turned off for a long time.
No. 23 installation, 2500k 8g memory 560Ti graphics card, Seagate new cool fish 2TB
This ASUS board often fails to find the hard disk when it is started. It can directly enter the bios. It can be found that the hard disk enters the system normally after repeatedly pressing the power button and restarting several times.
Someone on the Internet said that it is incompatible with Seagate hard disk. I don't know if it is. I plan to change the motherboard tomorrow.

No matter how many advantages there are, as long as there is a fatal disadvantage, it is not a advantage.

1. Excellent workmanship and good heat dissipation (premise of overclocking)
2. It supports RAID 0, 1, 5, and uses 2 to 4 SSD hard disks to form a disk array, with the speed soaring (the effect is frightening)
3. Support Turbo Boost2.0 technology (intelligent overclocking)

Does not support SLI (At present, more than 560 video cards can run almost all games smoothly. It is not a disadvantage not to support SLI. As long as you have more money, you can buy high-end video cards.)

The first choice to experience speed and passion (requirement: more tickets in hand)

Dual PCI-E 2.0 X16, graphic BIOS, USB 3.0, SATA 6G are quite a few. I am i3 2100 (I can't help but go to i3 for funding problems). Gigabyte's GV-N560OC-1GI (I feel that the code of this card of Gigabyte is very strange. GTX560TI is written on the box, but the code is thought to be GTX560). A single 4G ddr3 1333 (for the same reason as i3) ANTCE VP550P. The island crisis 1920X1080 4XAA special effect is fully open (I don't know if the CPU is weak, but it can still keep smooth when opening 4XAA. When opening 8XAA, it will be less than 10 frames in a flash. Does that mean that the legendary fermi display is insufficient?) 32nm is indeed not the highest 55 degrees for free, The GTX560Ti (mine is a dual fan version) has a maximum of 70 degrees, and the most evil is the motherboard. It is reasonable to say that the Z68 is a single core, which should be very hot. But ASUS did not know about the black technology, but it was 33 degrees from power on to power off (solve).

I don't like to say that this board has nothing to do with anything except the main things. For example, the power on button of the motherboard is also used to restart the fault coder. The key is that the CPU power supply is too poor. There are only a few capacitors and no heat sink. What's more, the two PCI-E 2.0 blue ones are X16, and the black ones only support X4 mode. Oh, Maiga, I still want to have a SLI.

The quality of ASUS goes without saying. I want to upgrade the i7 2600 for several years (the power supply of this board seems to be a problem, so K can't have it), and then SLI. Another piece of BUT PCI-E 2.0 is X4?! On the whole, the quality and heat dissipation are very good (I tried hard several times to install screws and parts, but nothing happened), which is suspected of cutting corners.

Very expensive!

I can attach the real address, real name, which is absolutely true, but this model H61 and G41 have not had such problems! On average, channel customers repair 2-10 pieces a month. If you think of a county customer who repairs so many pieces a month, how many yuan can he pay a month! Why is it interesting to scold here every day? All I'm looking for is Todd...

Low end pit father, I am from Hefei, Anhui Province, and I don't agree with the above opinion. There are still many materials left for the same thing, and the "Bo Ban Tang" was exposed early! Jerry building and selling! You Baidu look for "Bo Ban Tang" and see the exposed facts! It's all a trust to make people so popular! ASUS must have spent money!

In terms of interface, it is super strong, completely in line with ASUS's style. What you want is more enjoyable to play games, and it supports SATA3. The powerful output interface ensures that you can provide portable and efficient data transmission services

Prices are too expensive to buy

If only the price could be a little cheaper

The latest board is very good

If only USB3.0 extension was built into the shrunken board

Only the X79 middle end overlord

The excellent power supply design and materials can greatly improve the stability of your platform. In addition to the latest SATA and USB3.0 transmission specifications, this motherboard is far ahead of other models.

I haven't found it yet

In terms of performance and stability, there are almost no rivals.