Blackened dual BIOS technology USB 3.0 for main boards of first-line manufacturers
Most dissatisfied
The heat sink is loose without heat pipe. Although there are two PCI-E X16 slots, one can only be used for X4 operation
summary
I don't know if there is a place that is not set properly. It will be jammed when the audio is turned on (loading the driver?) It will also be jammed when the audio is turned off
Not to mention the advantages, after all, the first tier brand
Most dissatisfied
The buyer had problems in one month!Gigabyte's customer service and after-sales can't be solved!Press and hold the RES key to turn off the machine and restart it manually to the LOGO, but power off and restart it wirelessly
summary
I wanted to buy the UD3R, but I was told that it was out of stock for more than 1500
I bought the board on October 5.The workmanship is very good. It looks very attractive.It is very fast with I5 2300.
Most dissatisfied
During the operation, the temperature of the motherboard measured by Master Lu has been hovering at 45 degrees, and I don't know it is abnormal.The CPU temperature is only 26.
summary
Since P4, we have been using Gigabyte boards. This is the third board.Except that the board audio network card failed and returned to the factory after being struck by lightning once, nothing else has been repaired and there is no problem.I hope I bought the same this time.
It looks good and has passed the official website verification
Most dissatisfied
For the newly equipped machine, the U is 2600, the memory is Kingston Divine Bar/1600, the graphics card is 460, and the motherboard is Gigabyte P67A-UD3R, which is too regretful to reach. After installation, it took more than two days to shut down normally, and the second boot repeatedly restarted.By changing the display card and memory location, the computer can be turned on normally at last, but another problem cannot be solved: the USB (on the board) behind the mouse can be turned on the first day, but it cannot be detected when it is turned off the second time. Often, the mouse is inserted in the front (on the chassis), and it can be used immediately, but the other USB in the front will fail immediately. If the USB disk is inserted, there will be no response,When the mouse is turned off, the USB flash disk is detected immediately. When the mouse is inserted, the USB flash disk becomes invalid immediately. The USB flash disk is only useful after it is inserted. It is normal to put the mouse on another machine for testing.Syncope.
summary
In general, I regret it. The machine with nearly 10000 yuan is not working well. I still haven't found out the reason for the heavy lifting. I hope it won't appear again
1、 All Japanese capacitors are full of materials, which inherits the quality of the previous generation motherboard (EP45-DS4 I used before) 2、 12 2-phase power supply, with heat pipe, blackboard workmanship looks very overbearing 3、 Very rich interfaces, supporting USB3.0 4、 The double copper, dual BIOS, intelligent power saving and other functions are quite good. There are a lot of accessories and an SLI cable.
Most dissatisfied
1、 The price is too expensive. There is only one store in Sichuan, starting from 1900!The hard-earned money! 2、 I didn't find any other problems.
summary
The previously used Q9550 EP45-DS4 is now replaced with the platform i7 2600 P67A-UD4 460 sli. I don't think I need to consider replacing the hardware in a few years.Stable use and comfort are the biggest selling points. I still believe in GIGA
First tier brand, excellent workmanship, power supply and cooling, good compatibility, support SATA3, USB3, rich interfaces, support RAID, 10 phase power supply, dual BIOS design, rich software.
Most dissatisfied
The power supply heatsink is not fixed firmly, and it is swinging straight. It does not support SLI. It seems that one PCI-E is 4X, which causes CrossFire to become a decoration.
summary
Machines equipped before the festival: i5 2300 1300 yuan;Gigabyte p67a-ud3r 1350 yuan;Memory Zhiqi 1600 2x2GB package, which is too low, should be a parallel product, but it is stable at present;Hard disk western 1TB blue disk 400 yuan;Antec vp450 290 yuan;Xingu Reno Tower: 290 yuan;CD-ROM ASUS;The seven rainbow GT240 of the graphics card is old, and it has only been bought for three months;The display dell s2209w is old.The Win7 system is normally powered on for about 30 seconds and quickly powered on for about 19 seconds. At present, it runs stably.
Excellent compatibility, B3 step into the latest P67 motherboard, and the power supply is solid Rich mainboard interfaces Power saving mode is very effective Good temperature control Room temperature 20, chip 38
Most dissatisfied
Although the materials and workmanship are good, there is deflection in the side view. It is estimated that the deformation is caused by the CPU bracket.Therefore, it has left a shadow on the installation of heat sink and fixed motherboard. The motherboard deformation seems to be a common problem of Intel
summary
It's still a good motherboard, the price is relatively high, and the online purchase price is very affordable
The PCB of this board is very gorgeous and has the style of Xunjing in those days.Because the power supply part is very gorgeous, the overclocking ability is excellent.With two BIOS, you can try to refresh boldly, and the bios has rich functions, which is very suitable for DIY.In terms of peripherals, there are also two front USB3.0, optical fiber and coaxial. The main advantage is that even B2 stepping can support IVB (Rev1.1 PCB) through strong BIOS brushing.This is a function that only a few P67 mainboards have.
Most dissatisfied
The exchange of fire only supports 16+4, which is inefficient. Slot color matching is too dull.It is recommended to replace PCI-Ex16 and 2 memory sockets with dark blue to match the dark blue color block on the heat sink. Finally, it is suggested that Gigabyte add future mainboards to the SLI capability, and attach the supporting SLI/CF cable.
summary
Very good overclocking board, much better than those shrunk 7-series.If you don't play firefight and SLI, this board can completely meet any needs.
Great black. I feel comfortable when I see enough blue The power supply is sufficient, and I still think it is OK at present!
Most dissatisfied
For the 1600 memory, it's a bit crowded to put three memory slots in that location. It would be better if there were two memory slots on one side. One of the two video card slots is X4, so fighting is over. It's better to add the CPU heat sink by yourself. For those with screws, I really can't bear to press the plate. It would be great if there was a direct super external frequency option in the BIOS... an evil smile! If there is HDMI or something in the interface, it would be great. The main reason is that there is not much money. After starting, the CPU has no money. I got a G530 on it. I wanted to make do with it for a while. I used the G530 GPU to make do with it, but I couldn't find the interface to plug in the display. The poor people are sad!
summary
The price is still too expensive!Fighting is a dream
Intel P67 chipset, ATX board, LGA1155 processor interface, 4 memory sockets, which can be overclocked to 2133MHz, providing sufficient performance guarantee, and the material is also quite impressive
Most dissatisfied
The back interface is old, without HDMI interface or DVI interface
summary
Gigabyte is a big brand, and the quality is guaranteed. Now the warranty is four years, and the after-sales service is also good. It would be better if the interface was better
Large board, good compatibility, low temperature. Computer model Gigabyte P67A-UD3 desktop computer Operating system Windows 7 Ultimate 64 bit SP1 (DirectX 11)
When starting up, plug in the mobile hard disk, the keyboard light turns on, and then the keyboard does not respond, and the computer is suspended.Unplug the hard disk and enter the system. There is no adverse reaction when using the mobile hard disk under WIN.The USB flash drive will not have such problems.Is it an individual phenomenon?I hope this problem can be solved after replacing the motherboard in April.
summary
The Gigabyte board feels good, but the customer service doesn't dare to praise it.A lot of emails were sent due to the defect of P67 chipset, but none of them were returned. At least one feedback email should be returned!Hopes Gigabyte's service can be improved.
Although generally used interfaces are complete, PCI-EX16@X4It can only support A-card exchange but not SLI. I don't think it is worth the price for this price, except for A-card players. If N-card players cannot accept it, the location of SATA interface is not idealTo be honest, this board is not worth the price~
When I was brushing the bios, I imported the wrong program bios of different models twice, but it was not damaged by me. I was amazed that I could see the model of this motherboard for the third time, and I brushed it well once.
Most dissatisfied
After installing the Kyushu Aeolus player version, I found that the memory [No. 1 and No. 2] was bullied and the location was too narrow. The memory heat dissipation must be affected. I regret it a little.At present, the heat dissipation of CPU is increasing. In this case, worry about memory
summary
It would be better if the memory location were a little richer. The price is also a little expensive.
The quality of first-line manufacturers is good. Although there is a problem with the SATA2 interface, the 1TB green disk with the Western SATA3 interface is still good, so we can bypass the problem interface!
Most dissatisfied
Unfortunately, such a good board lacks a PS2 interface. Although the PS2 interface will be phased out in the future, at present, even the keyboard and mouse are all PS2 interfaces. I have to replace one
