Comments on Gigabyte GA-PH67A-D3-B3

In 2010, the popular SATA3 and USB 3.0 finally appeared on the H67. The integrated video output interface is very rich, which works well with the SB processor. As always, the stacking is very comfortable. It also supports fire fighting. As for SLI???

As for the disadvantages, there are too few SATA II interfaces. I think that at least four should be left, and the IDE has completely disappeared. Also, it would be better if the CPU power supply had heat pipes. Of course, this price is higher. Hehe~~I wonder whether crossfire supports dual 8X or 1X16 and 1X4

It is hoped that the listing will not exceed 1K and take the cost performance route; However, in Gigabyte's style, I think it will cost thousands of yuan, so the cost performance is too low. If you like the brand Gigabyte, it is still worth owning. After all, the first line is not blowing!

It is cheaper than p67, suitable for non K series u, and can fight and raid

No usb 3.0

The h67 board supports the exchange of fire, which is actually a bit of chicken ribs

Once lit, the use is very good, sata3 is very powerful, the interface is rich, the price is appropriate, and the all solid state capacitance is stable and super stable

Memory can only be 1333 at most

Gigabyte motherboard is a major brand, and the most favorite is the manual. It's very considerate to have a simplified Chinese description. The last time I bought ASUS motherboard, I turned over all the instructions in English. That's a depression! I don't know whether the ASUS motherboard manual is in English or Chinese. Gigabyte motherboard can also be made of solid materials.

New framework, new chip update? This is a must. The motherboard is well made. The board supports dual channels. The USB interface rents multiple dual channels and plugs them into the blue memory interface. Listen to the Gigabyte engineer's instructions. I found out that the CPU-Z detection on white is actually in the No. 2 and No. 4 sockets, so I had to unplug them and plug them into the blue

Without USB3.0 interface and HDMI VGA DVI interface, the motherboard can remove a video card slot. At least the price can be reduced. Most people can afford two video cards, and they can afford two video cards

Very good motherboard. I always like Gigabyte. You can buy it

No overclocking, enough, with integrated display output, MicroATX small board design, Intel H67 single chip, supporting LGA1155 interface Sandy Bridge processor

There are a few interfaces

The board supports USB3 and SATA3. The workmanship is good

I like the appearance~ Gigabyte's products are all good~ Good workmanship~ The slot is just enough for your own independent sound card! Get another 20 yuan network card for lightning protection!! In fact, one video card slot is enough~ I don't think I will choose this motherboard if I can afford to fight! I feel comfortable when I go to I5 2300! I feel this motherboard is a little hard when I go to I7!!

Direct election of Gigabyte~not Asus~!

I feel good! Everyone felt very satisfied

If you need enough materials, you don't need to know the professional knowledge. Just look at the board and you will be satisfied with the products in the MaTX board

The front fan of my chassis is 3-pin, and there is no extra slot. It's depressing that the machines in summer also need to cool down... If you know, tell me how to do it

M-ATX case is definitely worth buying!

The price is fairly good. The 990 Ocean was bought in Qingdao, but the materials are enough, and there is no obvious shrinkage. The inductance is still purple. Like my P45 in 2008, the interface is relatively rich.

There is no USB3,0 interface, and CPU-Z 1,57 can not detect that the memory is dual channel. The old version, let alone, has replaced three sets of memory, two sets of Yuzhan memory and one set of Kingston memory, which only displays 4G. Depressed, the same is true for another user in Shandong

I hope it's the CPU-Z problem, not the board problem

The functional interfaces can meet my requirements.

The temperature of the south bridge is too high, so you can only touch it, otherwise it will burn.

It's just too expensive.

Satisfied with the interface

It's just good to remove the extra graphics card slot after it comes into the market late
For most people, it's better to leave three pci slots. One independent sound card is used for singing. One independent network card is used for monitoring. One independent network card is used for standby. I will never buy a dual card in my life. It's a waste of power and money

I said everything

First tier brand, quality assurance, support USB3.0 and SATA3.0, support RAID. The material is perfect. The board is really big...

I don't know what shortcomings there are.

It was equipped on May 21 and is currently in use. It was originally intended to buy Huaqing Z68, but it is out of stock.. The Gigabyte H67M is still out of stock. I finally chose this one. I don't know what the problem will be. Of the previous problems with various SATA ports of Onda NF570S, only one of the four 2.0 ports is available, which may be related to my failure to clean up in four years... In general, if you don't have RAID and expansion, you'd better use a small board. At least the price is reasonable.

Good material, willing to use materials, and has been stable since running for more than a year. I am equipped with the Core II 2300U, 16GB of memory, and the Yingchi GTX570 black player. The gameplay can handle most games. At the time of purchase, 1500 oceans, now down, interested players can rate, scalability has no say!

The two PCI-E settings are unreasonable. I installed the black general of the Yingchi GTX570 and put the other one in gear!

Very good board, hehe!

There are many interfaces. No matter you use them or not, there are many interfaces.

Because there should be PCI-E slots

Generally speaking, it's a good board. Because we often thunder here, we changed to another board.

USb3 sata3 raid motherboard with high cost performance ratio. It is convenient to get two hard disk groups RAID0 back, and the system speed is improved significantly

The driver doesn't support XP very well. Win7 is OK

The only thing about the usb 3 sata3 raid motherboard with high cost performance is that there is no option to adjust external frequency in the bios. Even the H61 board of Gigabyte has it. I hope the bios of the next version will be changed. Even if it can only be adjusted from 100 to 104, the overclocking will improve the system

Equipped with SATAIII, USB3.0!

Redundant DVI, HDMI, D-Sub, Displayport interfaces!

I don't understand why the motherboard I/O is equipped with DVI HDMI、D-Sub、Displayport? Isn't it redundant?