In the p43 chip series, this motherboard should be the first choice. The price is not high, and the board type and materials are full. All solid state capacitors bring stable working performance to the motherboard. Dual boss design, dual pcie graphics cards can achieve strong dual card crossfire performance. There are four memory sockets and support the ddr3 generation of memory, which can be grouped, dual channel interfaces, rich and perfect heat dissipation. In short, it is a good board
Most dissatisfied
Memory support is too small for cost performance, only 4g
Compatible with DDR2, DDR3 Dual PCIE slots support video card exchange
Most dissatisfied
Success is compatible with failure. The two specifications support a maximum of 8G and a maximum of 4G for a single bar After 2 years of use, there are 4 capacitors under the memory (installation status) and 1 1500uF capacitor bulge on the left side of the north bridge. It is doubted that it is not a high-frequency capacitor, and the external frequency cannot be pulled up to 333, so it cannot reach FBS1333, only 280 external frequency/FBS1130. I don't know whether it is caused by the bulge capacitor BIOS has a bug. It is identified that there is a problem with the temperature of the CAU. The temperature of the motherboard is constant at 19 ℃. The options for setting FBS in the overclocking setting are messy
I didn't notice it for a while, but I forgot to mention it. I sent it to you in version 5.0. There is no IDE. It is powered by 3 phases. Version 6.0 is powered by IDE. It is powered by 4 phases. It is shrunk. Please write some experience for later buyers.Despise the shrinking of Onda motherboard's disorderly hair version.
The motherboard is very good, clean and perfectly packaged.Appearance is 8.5-9% new.It runs well. One of the 5130 equipped with a strong 771 for friends runs stably and is worth recommending.Continue to purchase if necessary
Very new, good board. The 771 is a perfect match. The only regret is that the D3 can't be used in a single 4G, so I silently click to run the score~~~After getting the board, I brushed the microcode. SSE4 and VT-X are perfectly supported.
The motherboard is very good. There is no trace of water washing. The four core 3330 has been turned on for 29 seconds. However, at the beginning, a memory and video card were not recognized. The contact was poor. It was just a matter of plugging and unplugging. The second-hand motherboard is extremely valuable
The appearance is really not flattering. It is almost corroded by acid. The sockets are all rusty, but the quality is OK. I painted the bios of p45s+to use it stably
The board is good, the operation is normal, the boss is very good.It has been running continuously for one and a half days, but it didn't crash or restart. Although it looks old, the price is good, 5 points
The color is super new. ver: version 3.00 black board is good. It can be used in double-sided ddr3 4g single-sided memory... It's easy to use when the temperature is low