Good heat dissipation effect!When the i7 930 overclock reaches 3.6G, the core temperature is 35~39 ° C and the surface temperature is about 27 ° C.When testing Fritz Chess Benchmark, the core temperature is 52~56 degrees and the surface temperature is about 44 degrees.
Most dissatisfied
Because the fan is three needle, it can't adjust the speed automatically, but even if it turns full, the noise is not big!ha-ha.
summary
The heat dissipation capacity is quite excellent. I think it's a good radiator!
The X3 710 is powered to 2.8, the original cooling standby is 47, the full load is 100 degrees, and the fan can be adjusted to 4000 revolutions no matter how.As noisy as video card! After replacing this big guy, the standby time is 25, the full load is 37, and the fan is 890.Grey often excellent!Of course, it was much quieter.
Most dissatisfied
The design of the twin towers is too large. If I hadn't asked many people, I would still have doubts about whether it could be put into my destroyer.Fortunately, the cover of the side panel of the chassis was removed and reluctantly installed!In addition, it will be troublesome if it is not used for the large board, because it will cover most of the memory slots, and only the two outermost slots of the large board can be used.
summary
Every price is worth every product. If the price of 500 is not water-cooled, it will be. I have also seen the things of Limin and Cairong. The workmanship is not as good as owls.
Very powerful, including performance and volume.I use a 2011 to 1366 speed regulator, which is very effective. The i7 950 does not overclock, and is in standby for 27 degrees.
Most dissatisfied
I think the silence is average.The reason may be that it is farther away from the chassis and the side panel of the chassis is hollowed out. The chassis is HAF922.
Six 6mm heat pipes of decent twin tower radiators are evenly distributed inside the fins. They are matched with the 14 cm fan blades of NF-P14 fan and the 12 cm fan P12. The heat dissipation performance is excellent, very quiet, the packaging is rigorous, the service is good, and it can be settled at one time.I haven't found any shortcomings yet. Overall, I really like the radiator, which is very good.
Most dissatisfied
It's too big, but it's very generous and excellent.ha-ha
Before, I didn't use owls to feel that the CPU temperature was too high. My roommate said it was too noisy. Later, I spent thousands of dollars to replace the owl's radiator and fan. The fan became much quieter when the temperature dropped. Now when I hang the game at night, I'm not afraid of being noisy. It's good, but the price is painful.
First class heat dissipation effect!My i7 930 overclock to 3.5G, standby temperature is about 38 degrees, full load is about 45 degrees, very good!
Most dissatisfied
We all know the disadvantages. It is huge and incompatible with high-end memory with comb!Fortunately, I don't use high-end ones. Just smile!The mute effect is not flattering, at least I heard a loud voice!
The heat dissipation capacity is the best among the air-cooled radiators. The only comparable estimate is HR-02.It also has something to do with the case. If others use it well, you can't say it well. The case is also very different.I used it on the Cool Blazers just right, almost to the side panel.
The heat dissipation is really powerful, and the CPU has not been powered up to 45
Most dissatisfied
Who will tell me what memory module to use!!!All kinds of touching have wood!!!My ROG M6E motherboard+GTX770 ice dragon, just after installing the machine, touch the graphics card for me, and the first PCIE3.0 slot of the motherboard will touch the heat dissipation!Performance is all floating clouds~
Excellent heat dissipation capacity 3930k Full load temperature pressed to 24 degrees Stable r4e motherboard
Most dissatisfied
It is compatible with r4e. It is inserted in the CPU fan port. The motherboard alarm needs to turn off the qfan option because the CPU temperature is too low. d14 does not work
It's really a huge thing, but the effect is OK. The standby temperature is 21 degrees, the workmanship is also very good, and the installation is relatively simple.The packaging is very good and tight
The king of air cooling, the original 3770K 4.2G ice blade is fully loaded at 78 ° C (the room temperature is about 20 ° C, and it seems that the room temperature is 10 ° C, so the influence is not big, and it may be different if it is hot), and the old cat has just started to load at 50 ° C. When the temperature exceeds 4.5G 70 ° C, my case is just installed with the very old 19cm case, and when the temperature exceeds 4.5G, it returns to 4.2G, and the full load temperature does not exceed 60 ° C,At present, it is planned to run 1.188V 4.4G for a long time, and the temperature is about 73. Maybe it will be lower if the chassis is good
Try it for a day, and the effect is good.It is not as heavy as expected. The mainboard is firmly fixed. It's OK. All previous worries have been swept away.
The owl fan is absolutely a good thing for heat dissipation. Its sound is very light, just like nothing else. The heat dissipation effect is excellent. The first thing I recommend is the owl. What about water cooling? The sound of the water pump is the same as boiling water. Air cooling is still a very good choice.
This is a very good radiator. When the default frequency is 3770K, the standby temperature is close to 30 degrees, and the full load is more than 50 degrees. It is very powerful. After two days of overclocking, the cat fan's mute effect is also excellent.It was just a bit strange when I installed it for the first time. In addition, my chassis is in the middle tower and the space is just right, so it took some time.On the whole, it's very good, all five points!
The package is excellent without Chinese instructions, but the installation is simple. After ten minutes, I bought it not only to cool down, but also to look good.It is a perfect match with the Antique fish bone bone bone box.At present, the i5 3570k is over used, and the overclocking is not allowed temporarily.