Comments on Xianma XT128DW

There were too many cables provided, no control box, the water-cooled fan had only 5v3 pin serial port, and was forced to connect to the fan port and 5v3 pin port under the mainboard, which was quite limited, but almost not long enough.....

The short screws of the fan are not easy to use. It is very hard to install the fan. I don't know how to use the long screws. The "furnishings" are totally incompatible

I bought a fan to be used as the outlet fan of the chassis. The air volume is very large. It's much better than Liming tl c12cw. You can get the goods for every penny

Dian Zhongdian bought his home's new realm chassis and water-cooling. In order to unify, he bought four fans that are the same as water-cooling. As a result, the 4pin of the power supply has no male and female terminals. Should I connect a fan to four computers separately? Why do you design a chassis with 7 fans when you need to buy a separate adapter cable? I bought four fans just to install them separately

I bought the water cooling version of Xianma without a fan. It was equipped with the old two fans, but the rotational speed was only 1500. I felt that the heat dissipation effect was not very good. After all, it was the CPU heat dissipation. Finally, I had to buy these two original fans. The air volume and air pressure tested on the computer were much better than mine, very good????!

The XT128 is really very good. The external plug-in cable makes the location of the fan more flexible. The 1800 rpm and wind blowing l7 have no problems

The fan is in white style, very beautiful and beautiful. It has a lot of accessories. It can be basically installed in the cold exhaust and the chassis. The wire material is also good. It can be connected with the fan of its own. The noise is OK. Generally, it is not very loud. It is still noisy when fully loaded

We will arrange reissue immediately after the line. The workmanship is very solid, the sound is also very low, the installation of water cooling and the chassis are OK. The texture of the hand is fairly good. If the buckle can be designed to be perfect, the wind pressure is also good. Use it as a fan! The wind pressure is very high, much stronger than the fan with water cooling. The light has uniform color and high brightness. Apart from other things, the beauty is cost-effective, and it's full!

The fan is easy to use and the cheapest performance fan. The fans of the whole machine are first, cheaper and easier to use than Lianli's. However, the design itself can be optimized. The metal surface can really add DIY elements.

The RGB light is very cool. It supports the holy light synchronization of the player's country motherboard. The fan is simple to install, and there is little noise when it is standby. It takes off directly after the speed is full. 618 has a low price and high cost performance

The lighting effect is very good, the metal of the shell is clean, the fan is very quiet at low speed, and there is some noise at high speed. Within the acceptance range, the lighting effect and color are accurate and bright, but unfortunately there is no reverse leaf version

There are many ways to make 2 crates. Although it is a mesh panel, its strength is very good. The light can also be slightly revealed. With 5 x t128 fans, the appearance is online.

Very good, strong wind, low noise, high appearance. At the same time, I bought water cooling and chassis, which are easy to use

Just one word? I only say it once! Rgb is very nice! The air volume performance fan is very different from the ordinary shiny fan like prism. The 1800 rpm fan is really fake. It's useless! Compete with the first horse to make a verdict!

Honey, you got it???????? It's really great!???? The quality is really amazing, very satisfied!???? Happy????. The wind pressure is very high, much stronger than the fan with water cooling.