This may be the only one at this price that can hold down the 5900x 240 water cooling. Players who like their diy chassis know that 5900x heating is quite severe. This is normal about 40 degrees, and no higher than 70 degrees. The mute effect is also quite good. I can only choose 240 water cooling because of the shape of the chassis. If you have friends with similar needs, you can close your eyes and charge, which is more cost-effective than thieves
It is matched with MSI's 760m motherboard. The chassis is limited to 240 or 280. I think 240 is the most cost-effective. The rgb light works well, and the 14700k is OK. When the power is increased, the sound of the two fans is a little bit loud. Maybe the cost is limited. It is impossible to use a more high-end silent fan
I haven't commented seriously. I don't know how many points have been wasted. This benefit is really good. I write more than 100 words every time properly. I don't know how many times I have bought things on the Internet. They are cheap, good quality, cheap, safe and happy. This is really the rhythm of shopping addiction. I can't stop. There are many categories, and they are complete, cost-effective, convenient, fast, affordable, and well packaged,There is no damage. It is a good news for consumers and will continue to support it. It is very suitable for Taobao to buy anything for eating, drinking and playing in daily life for lazy people who can't leave home.
It's OK. The temperature of 5900 ℃ can be pressed to about 42 ℃ every day.It looks like a cat's head????It's almost air-cooled.It is quite compatible with the main board of the mortar, and the pipe is relatively hard.The fan supports mainboard Shenguang synchronization.
It's too dull. It's inconvenient to install!There is a third bulge on the water drain, so the water drain cannot be placed outside. It has been stuck in the position by the third bulge, so the water drain can only be hit inside the chassis, the fan is installed outside, and the suction air passes through the cold exhaust!The supplied fan is not marked with the air outlet direction... it is just installed reversely, and the rhythm of disassembly and reinstallation is required... It means that it is not
Playing games with a full load of CPU 5600, the temperature is more than 50 degrees, and the room temperature is 27 degrees. The heat dissipation is OK, and the materials are very solid
I installed two sets of backplanes myself. I felt it was OK. I went to the repair shop to have them repaired, but they didn't fix them. I replaced them successfully at home. Now the computer is turned on for more than 30 degrees. Before I replaced it, it was turned on for more than 90 degrees
It's simple to install, and its heat dissipation is also good. It can't withstand the 13700kf with full fire power, but it's OK to play games. The temperature does not exceed 80 degrees
The water cooling is very good, and the package is tight. It is perfectly compatible with MSI's whole family barrel. The installation is convenient and fast. It perfectly supports MSI's own divine light synchronization. There is no noise, and the heat dissipation effect is very good. When the pressure is 5600x, the normal temperature is about 30 degrees, and the game is about 60 degrees
It's not awkward to match the mortar motherboard. A motherboard was specially replaced with a water-cooled one, which has strong heat dissipation capability and is silent