After using it for more than a month, I felt that it was OK, not inferior to ordinary 360.But this 280 water cooling should be an old product for several years.The latest 280360 is basically better than this.I chose this one because I was too lazy to change the chassis. I had to put a 280 water cooling device.Generally speaking, it is stronger than the wind cooling of the twin towers. It is really quiet.
Shot through the case, so it's not very clear.The actual effect is very good. I don't like light pollution, so I didn't bother with the display screen. The radiator effect is awesome!7950x3d can't stand a little spray under S280, and it can't exceed 40 degrees for normal use without overclocking.The key is that the noise is really small.
Pretty good, didn't dismantle it.The packing is OK.The group ITX voltage of 14900K does not exceed the frequency, which should be no problem, but the power consumption is limited.
It's very cool. Although the screen is small, the display effect is very good, the color is also good, and there are many options. The 280's cold exhaust performance is also strong, and only 799 is great. If you bring your own Rgb fan, it will be perfect
Matx small box is equipped with 14700kf, which requires a powerful radiator. Air cooling is not expected to work. After looking at it for a long time, the only suitable 280 water cooling for the whole network can only be said to be just right, just right
The cold head of MSI has a texture, and has not been used yet. The 280 is just matched with Lianli Seaview Room, and its energy efficiency is basically the same as the 368.
After knocking for a long time, I finally bought a more satisfactory one, which has a more refined appearance.It still costs enough to buy water cooling, and the sound of the water pump is acceptable.Normal mute.There is a slight noise when roasting chicken.The cat d15 was originally used. After replacing this one, the temperature of the baking machine dropped by 6~7 degrees at 13900K, about 90 degrees, and the power consumption was 350w.Torrent * * * pack chassis.I wanted to do it next time, but the 401 graphics card occupied too much moisture, and the distance between the two was too close. On the contrary, it was better to put the water cooling in front. I had to remove the original two 18 cm fans. This is a little pity, but I don't regret it.Finally, it is very important to complain that the software of msi is really slow to download and load.First class hardware, last class software
The MSI yyds is too cool, and the cost performance ratio is too high. I9 12900k overclocking to 5.3G. The game has a 2-hour maximum temperature of 60 degrees, standby temperature of about 40 degrees, room temperature of 27 degrees, ultra quiet, super quiet. No noise can be heard. The actual area of two 14cm fans is only 10% smaller than the 360 cold exhaust. The cold head video can be adjusted in four directions. The installation is very simple. The MSI road turns to pink
The pressure is 12600kf full core 5.1, 1.24 voltage, and the temperature depends on yourself. The sound of the cold exhaust fan is very low.It is better than the second generation of Dragon God. It should have been used by me.The second generation Longshen helicopter.
The fan doesn't have a light, but it has a texture. The software interface is very clear. The heat dissipation effect is very good. The standby temperature is more than 30 degrees. 12700k. In short, it is very low. The temperature of playing csgo is not high. I was afraid that the water cooling leakage is too bulky. I replaced the flagship water cooling bar. The leakage compensation quality is also good
Very quiet, much better than the previous air cooling experience, almost no installation difficulty, can press 5600x, ASUS motherboard, room temperature 25 degrees, playing games CPU core temperature about 55 degrees.
